Fasteners

Rivet Conveyor Belt Fasteners suit high-tension systems.

Rivet Conveyor Belt Fasteners suit high-tension systems.

Developed for heavily loaded mainline and panel belts in underground and surface mining, Flexco-® R9S fasteners are stamped from 0.135 in. thick 300 Series stainless steel and accommodate belt thickness from 5/8-1 in. Fasteners, part of SR(TM) Scalloped-Edge(TM) rivet-hinged conveyor belt fastener system, feature 8-rivet attachment and suit belts with mechanical fastener ratings up to 2,000 PIW...

Read More »
Mechanical Panel Fastener works without screws or tools.

Mechanical Panel Fastener works without screws or tools.

Utilizing DÂ-·SNAP technology, SNAP-JOINER can be snapped into place on metal panels by hand. Requiring rectangular opening for installation, DÂ-·SNAP housing holds spring-loaded set of wings that snap into position to hold firmly in panel, even in severe vibration environments. Product can be used wherever 2 sheet metal panels need to be joined. It can also be used in place of captive...

Read More »

Fastener Seals suit aerospace and automotive applications.

Fas-N-Seal(TM) seals feature metal retainers with integrated elastomeric material. Retainer serves as torque limiter to eliminate torque loss during operation, while bonded design prevents displacement under internal pressure. Fas-N-Seals are available in range of Aerospace Material Specification/Military Specification elastomers, including nitrile, fluorocarbon, silicone, and fluorosilicone....

Read More »
Fasteners resist corrosion in stainless steel sheets.

Fasteners resist corrosion in stainless steel sheets.

Machined from hardened stainless steels, PEMÂ-® Fasteners can be installed permanently in stainless sheets as thin as .030 in. Self-clinching units made from 400 Series SS include PEM Type SO4(TM) thru-hole threaded standoffs; Type BSO4(TM) blind threaded standoffs; Type FH4(TM) flush-head studs; and Type PFC4(TM) panel fasteners, which incorporate captive screws and meet UL 1950...

Read More »
Fasteners facilitate brand identification and recognition.

Fasteners facilitate brand identification and recognition.

System 1000(TM) Brand Identification Fasteners display highly visible printed brand names, retail names, and product logos. They feature rectangular paddle that measures 5/8 x 3/8 in. Distinctive appearance and proprietary molding process serves to verify product authenticity, identifying fakes and potentially deterring counterfeiting. Polypropylene fasteners can be applied to products using...

Read More »
Self-Piercing Fasteners target automotive applications.

Self-Piercing Fasteners target automotive applications.

Available in strip or coil-form, Piercetek(TM) Pierce Nuts and Self-Piercing Anchor Plates(TM) range from 4-10 mm. Suited for automotive applications, units self-pierce sheet metal panels and mechanically stake fasteners into position in one continuous operation. Optional thread masking and various finishes are available.

Read More »

Elastic Fastener attaches products to header cards.

Using variable needle applicator, Elastic Staple(TM) is strapped around product, tightly securing it to header card. Suited for products such as hand tools, toys, and kitchen utensils, fastener allows consumers to try product at point-of-sale without destroying packaging. Single needle system inserts fastener's T-end directly through product, making it suitable for soft products such as hosiery,...

Read More »
Panel Fasteners install without screws or tools.

Panel Fasteners install without screws or tools.

D-SNAP technology provides mechanical means of installing hardware on sheet metal surfaces that stays securely attached to panel even in severe vibration environments. Housing holds spring-loaded wings that snap into position to hold latch or hinge firmly in panel. They retract as part is installed and slide back into place with snap sound when installation is done. Mechanism can be retracted to...

Read More »
Fasteners feature vibration-resistant joints.

Fasteners feature vibration-resistant joints.

Suited for long grip applications, 2-piece Rivet-Mates fasten multiple components up to 2 in. thick without marring of application's surface. They are suitable for steel fences, highway signs, metal furniture, construction signs, aluminum buildings, wood and metal assemblies, transportation vehicles, and steel storage containers. Standard, handheld blind rivet tools are used for fastening.

Read More »
Blind Hole Locking Clip manages cables in panels/chassis.

Blind Hole Locking Clip manages cables in panels/chassis.

Model BHLWHC-500-01 locking clip has one-piece design that eliminates need for screws. Push fit installation is achieved with 6 mm hexagonal socket drive pressed on top of mounting fix, then pushed into a 7.9 mm dia blind hole. Barb end fix ensures secure fit, while releasable locking clip facilitates cable installation and removal. Available in Nylon 6/6 material, clip ensures that routed cables...

Read More »

All Topics