Fasteners

4-Way Part Locating with Welker Floating Pin
Self-Locking Pins

4-Way Part Locating with Welker Floating Pin

The Welker Floating Pin offers a unique opportunity to use an unlimited number of 4-way pins for part locating, significantly reducing part hole damage and pin wear. Parts are loaded when the pneumatic actuator is engaged and pin is centered and rigid. When the actuator is released the pin is allowed to radially float up to 3mm, and rotate up to 25 degrees. Lightweight and compact, the Floating...

Read More »
Fasteners

Spring-Loaded Plunger Assemblies serve as positioning pins.

Designed to install permanently in aluminum or steel sheets as thin as .060 in.Â- with hardness of HRB 80 or less, PEM® Type PTL2™ Assemblies serve as positioning pins to quickly move racks, slides, access panels, consoles, and similar equipment without requiring tools. Lockout feature keeps fastener's spring-loaded plunger fully retracted until plunger pin drops into final...

Read More »
Electronics Assembly Pins provide alternative to screws.
Miscellaneous Pins

Electronics Assembly Pins provide alternative to screws.

Used to securely attach top panels to base panel or chassis in compact electronic assemblies via press-in action, microPEM® TackSert™ pins provide alternatives to micro screwsÂ- and eliminate issues associated with threaded hardware. Diagonal knurl holds top panel of any material and as thin as .008 in. to base panel or chassis manufactured from magnesium die-cast materials...

Read More »
Self-Clinching Flush Nuts install into stainless steel sheets.
Anchor Nuts

Self-Clinching Flush Nuts install into stainless steel sheets.

Manufactured from 400 Series stainless steel, PEMSERT® Type F4™ Self-Clinching Flush Nuts provide load-bearing threads in 300 Series stainless steel without creating protrusions on either side. Upon permanent installation into sheets as thin as .060 in., both top and bottom of sheet will remain flat. Nuts are availableÂ- in thread sizes #2-56 through ¼-20 / M2 through M6 and...

Read More »
Fasteners

Grabber®'s Zinc-Plated Fasteners Are Manufactured and Plated According to the Strictest Industry Standards

Post-Plating Baking and Hydrogen Embrittlement Testing Also Governed by Exacting Criteria Highland, UT – Zinc-plated drill-point framing fasteners manufactured by Grabber® Construction Products, an international distributor of professional-grade fasteners and construction products, meet the toughest industry requirements in order to mitigate hydrogen embrittlement and other hazards. You...

Read More »
Sign and Label Holders

Sign Fasteners

The Micro Plastics sign fastener is designed for rapid assembly and disassembly of a sign or other panel to its support structure. Designed for a hole diameter of 5/16 to 3/8" (8mm to 9.5mm), the sign fastener can be used to fasten two pieces together with total panel thickness from 1" to 1.64" (25.4mm to 41.6mm).Â-  Simply squeeze the keeper together and slide onto the pin, then release the...

Read More »
Lag Bolts (Lag Screws)

Grabber®'s Tie-Master(TM) and Lag-Master(TM) Screws Earn ICC-ES Evaluation Report

ICC-ESR#3531 Highland, UTÂ- – Grabber® Construction Products, an international distributor of professional-grade fasteners and construction products, has received an evaluation report from ICC Evaluation Service (ICC-ES) certifying that its Tie-Master™ and Lag-Master™ screws are in compliance with the following codes: • 2012, 2009, and 2006 International Building Code (IBC) •...

Read More »
Standoffs

Self-Clinching Standoffs suit thin stainless steel assemblies.

Manufactured from heat-treated 400 Series stainless steel, PEM® Type TSO4™ standoffs are used for stacking or spacing components to or from ultra-thin stainless steel panels as thin as .025 in. and with max hardness of HRB 88 on Rockwell B scale or HB 183 on Brinell scale.Â- Hardened stainless fasteners install permanently; one mating screw is required for final component attachment....

Read More »
Fork Heads with Retaining Clips are virtually non-wearing.
Fasteners

Fork Heads with Retaining Clips are virtually non-wearing.

Mainly used with pneumatic or hydraulic cylinders, GN 751-AL Aluminum Fork Heads (Yokes) with Shaft Safety Retaining Clip are available in metric sizes. RoHS-compliant products consist of fork head with KL single-shaft safety retaining clipÂ- or SL double shaft safety retaining clip. Fork body and pin are anodized, black aluminum. Fork pin shaft safety retaining clip is spring steel,...

Read More »

All Topics