Fasteners

Self-Clinching Fasteners provide permanent threads.

Self-Clinching Fasteners can be installed permanently in metal sheets as thin as .020 in. and can eliminate need for washers, lock washers, and nuts. Steel, stainless steel, and aluminum units come in free-running, self-locking, floating, and blind hole types to meet unified, ISO, and MIL standards. Serrated clinching ring, knurl, ribs, or hex head prevents fastener from rotating in metal when...

Read More »

Broaching Fasteners are suited for use in or with PCBs.

PEMÂ-® broaching fasteners meet component-to-board, board-to-board, and board-to-chassis production-fastening needs. They can be used with all types of PCBs as well as with acrylic and polycarbonate components. Fastener family installs permanently and includes broaching nuts with permanent threads; threaded or unthreaded standoffs; threaded studs; all-metal standoffs featuring spring action;...

Read More »
Combo Kits provide fasteners and fuel.

Combo Kits provide fasteners and fuel.

Quik Paks each contain 1,000 or 2,000 fasteners plus equivalent amount of 2-step fuel cells for cordless trim tools such as Straight 16 Gauge Finish Nailer, Angled 16 Gauge Finish Nailer, and 18 Gauge Finish Nailer. Paks provide various fastener sizes including 5/8, 1, 1Â-¼, 1Â-½, and 2 in. for 18 gauge tool and 1Â-¼, 1Â-½, 1Â-¾, 2, and 2Â-½ in. for angled 16 gauge and...

Read More »
Screw Support fits drywall sizes of 1/2 and 5/8 in.

Screw Support fits drywall sizes of 1/2 and 5/8 in.

CADDYÂ-® MPVTI Versatile Thread Impression is intended for low-voltage applications where electrical box is not required. Since it provides single thread impression, it can be used in multiple quantities to support multi-gang devices. User attaches product to drywall opening edge at mating point of device screws. Serrated grip surface provides secure installation.

Read More »
Broaching Fasteners suit component assembly applications.

Broaching Fasteners suit component assembly applications.

Designed for use in or with PCBs, broaching fasteners satisfy component-to-board, board-to-board, and board-to-chassis production fastening needs. They can be used with all PC boards, as well as with acrylic and polycarbonate components. Fasteners include broaching nuts with permanent threads; threaded/unthreaded, flare-mounted, and all-metal standoffs; threaded studs; and one-piece board-mount...

Read More »
Hook and Loop Fasteners are supplied on continuous reels.

Hook and Loop Fasteners are supplied on continuous reels.

One-Touch Hook and Loop Fasteners feature custom die-cut pieces supplied on continuous length reels up to 25 yd and remain on release paper for high-volume peel and stick assembly operations. Hook and loop sides can be spooled separately, mated, or supplied as back-to-back self-closing straps. Offered in sizes from 5/8-4 in. wide in various colors, products can be made from fire-resistant...

Read More »
Access Hardware incorporates self-aligning threads.

Access Hardware incorporates self-aligning threads.

PEMÂ-® access hardware, with MAThreadÂ-® technology, employs anti-cross-thread design that corrects off-angle installations, aligns components, and slides through clogged internal threads. Design speeds assembly and eliminate failures, repairs, scrap, and downtime associated with thread damage. Hardware includes self-clinching, broaching, flare-in, floating, and surface-mount styles, in...

Read More »
Panel Fasteners compensate for mating hole misalignment.

Panel Fasteners compensate for mating hole misalignment.

PEM Type PFF(TM) floating panel fasteners feature fully captive steel screws in thread sizes No. 10-32 and 12-24 and M5 and M6 in varying lengths. They utilize washers for installation with flared punch into sheets as thin as .031 in. Once installed, they allow for radial float in assembly and compensate for mating hole misalignment up to .060 in. Fasteners also have standard slot/Phillips drives...

Read More »
Connecting Pins extend life of conveyor-belt splices.

Connecting Pins extend life of conveyor-belt splices.

Clipper-® Duralink(TM) and DuraStainless(TM), for wire-hook splices, feature nylon coating that provides 10x more abrasion resistance compared to nylon-covered pins. Coating lubricity reduces wear on inner radius of fastener loops. Duralink pins, with coating extruded over braided stainless steel cable, provide flexibility to accommodate troughing conveyors or crowned pulleys. DuraStainless...

Read More »
Right Angle Clinch Fasteners offer alternative to bent tabs.

Right Angle Clinch Fasteners offer alternative to bent tabs.

R'ANGLE self-clinching fasteners include self-tapping and steel threaded types that install permanently in metal sheets as thin as .040 mm. Self-tapping Type RAAÂ-ª aluminum clinch fasteners require thread-forming screws and come in sizes No. 4-40, 6-32, 8-32, M3, or M4. Threaded Type RASÂ-ª steel clinch fasteners come in No. 4-40, 6-32, and 8-32, M3, and M4 sizes; install in aluminum or...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics