New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features

New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features

Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...

Read More »
Handheld Thread Verification And Chasing

Handheld Thread Verification And Chasing

Why New Vista’s TG Guns are Replacing Manual Gaging and Hand Chasing New Vista is well known for its large offering of automated thread verification and chasing equipment. But not every application requires an automated solution. If your volume is limited, a powered handheld device may be the answer. If you are still gaging or chasing threads manually, it’s probably for one or more of these...

Read More »
Magnetic Suction Cup Mounting Plate comes with windload.

Magnetic Suction Cup Mounting Plate comes with windload.

MMP-4XSCM-24X8 Suction Cup Mounting Plate is engineered from high strength composite and powder coated marine grade aluminum and a plate made from powder coated steel. Plate can be used on lights up to 20 lb. such as spotlights, flood lights, strobe lights, beacons, warning lights, signal lights and flashers. Product is suitable hunting, fishing, farming operations and off-roading applications...

Read More »
Conduit Caps allow rerouting of conduits.

Conduit Caps allow rerouting of conduits.

Gibson’s Conduit Caps are available in Type 316 stainless steel in sizes ranging from ½ in. to 4 in. Featuring hexagonal flats for easy tightening, units come with NPT threads. Caps enables for expansion or rerouting.

Read More »
Robotic Water-Cooled MIG Guns come with gas lines.

Robotic Water-Cooled MIG Guns come with gas lines.

Robotic Water-Cooled MIG Guns are available in CWD and TWD versions which are used for conventional robots and through-arm robots respectively. Units come in amperages ranging from 350 to 600 amps and are equipped with gas diffuser. Products use dual-circuit cooling system and are offered in clutch and solid mount models. MIG guns come with mounting arms, neck options and integrated air blast.

Read More »
C863 Manganese Bronze Plate meets SAE 430B specification.

C863 Manganese Bronze Plate meets SAE 430B specification.

C863 Manganese Bronze Plate provide tensile and yield of 110,000 psi and 62,000 psi respectively. Unit meets ASTM B505 and ASTM B22 standards. Product features elongation of 14% and comes with uniform and fine grain structure. Plate is suitable for bridges and metal forming equipment applications.

Read More »
Gorilla® Ankle Fracture Plating System offers surgeons 44 total plates.

Gorilla® Ankle Fracture Plating System offers surgeons 44 total plates.

Gorilla® Ankle Fracture Plating System is offered in four variants such as posterolateral fibula, posterolateral tibia, posteromedial tibia plate and trimalleolar fracture plates. Posterolateral fibula plate comes with distal screw configuration and is narrower in design. Posterolateral tibia plate features two distal screw holes. Posteromedial tibia plate is designed for posterior pilon variant...

Read More »
Strip Hanger is made from beige or black metal.

Strip Hanger is made from beige or black metal.

Strip Hanger features covered-face sign holder to protect pricing tags. Designed for Power Zone® FlexRollerT self-facing system, unit is used to display two single-sided or one double-sided merchandising strip. Product comes with gravity feed design which uses integrated rollers for a self-facing experience.

Read More »
Solder-Side Covers are offered in solid or perforated options.

Solder-Side Covers are offered in solid or perforated options.

Solder-Side Covers are designed for 3U and 6U Eurocard PCBs. Units can be mounted on OpenVPX, CompactPCI, and VME/64x boards. Covers are offered in 3U x 160 mm and 6U x 160 mm standard sizes and also available for 80 mm Rear Transition Modules (RTMs) and 220 mm boards. Units with 0.5 mm and 0.3 mm versions can withstand temperatures of up to 120°C and 65°C respectively.

Read More »

All Topics