
Recessed Outdoor Wall Outlet Enclosure from TayMac
South Bend, Indiana April 24, 2018 - TayMac is proud to market the MR420 series of recessed outdoor wall outlet covers. The line of non-metallic covers is designed for use with all common siding types and materials. TayMac, part of Hubbell Commercial Construction, provides innovative electrical products to industrial, commercial and residential markets. The TayMac MR420 recessed outlet cover...
Read More »
Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection
Conta-Clip’s KDS-FP Flange Plate are available in KDS-FP-2x10/24 and KDS-FP-3 x 10/24 models with up to 20 or 30 configurable frame openings respectively. Consisting of 40 x 110 mm duct that is segmented into up to ten frame openings by snapping frame inlays, the inlays are offered in plain partitions, T-pieces or cross and double cross form.
Read More »
New GN 187.4 Stainless Steel Locking Plates are Compliant to RoHS standards.
GN 187.4 Stainless Steel Serrated Locking Plates are adaptable to range of applications. The units are made of different standard steel such as locking plates (American Standard Series 316L), guide housing (AISI 303) and conical thrust springs (AISI 301). The units enable interlocking of standards components at define angle.
Read More »
New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features
Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...
Read More »
How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products
Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.
Read More »
Handheld Thread Verification And Chasing
Why New Vista’s TG Guns are Replacing Manual Gaging and Hand Chasing New Vista is well known for its large offering of automated thread verification and chasing equipment. But not every application requires an automated solution. If your volume is limited, a powered handheld device may be the answer. If you are still gaging or chasing threads manually, it’s probably for one or more of these...
Read More »
Magnetic Suction Cup Mounting Plate comes with windload.
MMP-4XSCM-24X8 Suction Cup Mounting Plate is engineered from high strength composite and powder coated marine grade aluminum and a plate made from powder coated steel. Plate can be used on lights up to 20 lb. such as spotlights, flood lights, strobe lights, beacons, warning lights, signal lights and flashers. Product is suitable hunting, fishing, farming operations and off-roading applications...
Read More »
Conduit Caps allow rerouting of conduits.
Gibson’s Conduit Caps are available in Type 316 stainless steel in sizes ranging from ½ in. to 4 in. Featuring hexagonal flats for easy tightening, units come with NPT threads. Caps enables for expansion or rerouting.
Read More »
Robotic Water-Cooled MIG Guns come with gas lines.
Robotic Water-Cooled MIG Guns are available in CWD and TWD versions which are used for conventional robots and through-arm robots respectively. Units come in amperages ranging from 350 to 600 amps and are equipped with gas diffuser. Products use dual-circuit cooling system and are offered in clutch and solid mount models. MIG guns come with mounting arms, neck options and integrated air blast.
Read More »
C863 Manganese Bronze Plate meets SAE 430B specification.
C863 Manganese Bronze Plate provide tensile and yield of 110,000 psi and 62,000 psi respectively. Unit meets ASTM B505 and ASTM B22 standards. Product features elongation of 14% and comes with uniform and fine grain structure. Plate is suitable for bridges and metal forming equipment applications.
Read More »
Gorilla® Ankle Fracture Plating System offers surgeons 44 total plates.
Gorilla® Ankle Fracture Plating System is offered in four variants such as posterolateral fibula, posterolateral tibia, posteromedial tibia plate and trimalleolar fracture plates. Posterolateral fibula plate comes with distal screw configuration and is narrower in design. Posterolateral tibia plate features two distal screw holes. Posteromedial tibia plate is designed for posterior pilon variant...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »