Synchro/Resolver to DC Converters come in 1.5 in.-³ package.
Operating at 400 conversions/sec, series SD109 miniature solid state synchro to DC converters offer peak angular error of +3 min. Products convert 3 phase Synchro or 2 phase Resolver inputs into DC Sine and Cosine outputs. They accept output of standard 11.8 or 90 V 3-wire Synchro or 4-wire Resolver and provide 2 DC voltages. Input is transformer isolated and balanced line to line, and synchro...
Read More »
Data Converters come in 2.9 x 2.8 mm SOT-23 package.
Available in 8-lead packaging, nanoDAC(TM) AD5060 and AD5660 digital-to-analog converters offer 16-bit data conversion while integrating additional circuit components on-chip. Model AD5060 delivers 1 LSB max linearity error (INL), including its on-chip output buffer amplifier for open loop systems. For closed loop systems, AD5660 contains integrated 10 ppm/Ã-
Read More »
Current-to-Pressure Converter offers reliable performance.
Suited for variety of mounting positions and locations, Type 140 I/P converter features fail to zero output pressure on signal failure, electronic closed loop, IP66 housing, and vibration immunity. Jack socket is provided for on-site monitoring and local calibration. Certified for use in hazardous areas, product incorporates encapsulated modular electronics and sub micron, field replaceable,...
Read More »
Analog-to-Digital Converters range from 10-170 Msps.
Operating from 3.3 V supply, Series LTC2220 is comprised of 24 converters with 10, 12, or 14-bit resolution. At 630 mW, 12-bit Model LTC2224 operates at 135 Msps and comes in 7 x 7 mm QFN package. Suited for low power base station designs and optimized for undersampling, unit features 775 MHz bandwidth and achieves 77 dB SFDR up to 250 MHz input. Series offers selectable input range of Ã-
Read More »
Increasing Workplace Safety with Beryllium Medical Surveillance
To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.
Read More »USB 2.0 Device is suited for JTAG/BDM debugging.
Based on proprietary on-chip debug (OCD) technology, usb2Demon is designed for JTAG (IEEE Standard 1149.1) or background debug mode (BDM). It operates as converter of OCD commands, and target port may be JTAG, E-JTAG, OnCE, COP, BDM or any other supported connection. API is fully compatible with microprocessor architectures and software debuggers, including GNU tools suite (GCC, GAS, and GDB)....
Read More »
Converter provides 3-phase power from single phase source.
BOOSTER(TM) Single to Three Phase Converter features power factor correction and full-hard starting capabilities of 600% overcurrent on-demand. Unit maintains voltage balance by digitally monitoring 3-phase output and electronically switching capacitors in and out to maintain optimal balance. With no contactors to wear, maintenance-free unit offers self-healing polypropylene capacitors and EMI...
Read More »
Fiber Optic-to-Serial Converter offers redundancy feature.
Model ADAM-4542+ converts single-mode fiber optic signals to RS-232/422/485 serial signals. Aimed at long-distance communication applications such as intelligent transportation systems, it offers transmissions up to 15 km and wavelengths at 1,310 nm. By providing fault detection on main connection between 2 modules, communication can be automatically and seamlessly switched to secondary...
Read More »
I/O Module offers 24 million FPGA gates in one slot.
Software radio front-end incorporates two 105 MHz, 14-bit A/D converters and 2 user-configurable Virtex-II Pro FPGAs. VIM-2 module accepts up to 2 Model 6256s mounted on VIM baseboards while maintaining single-slot configuration, which offers 4 A/D channels and 24 million FPGA gates. Second-slot option increases number of A/D channels to 8 without requiring additional baseboard. Built-in memory...
Read More »
Digital-to-Synchro Converters drive torque receivers.
Miniature Converter Modules provide up to 3 VA power output and Ã-
Read More »
Fiber-Optic Converters send video signals up to 3,300 ft.
Both DVE 1000 video extenders and CLE 500 camera extenders use matched converters to switch between electronic and optical signals. DVE 1000 units allow monitors or projectors to be located up to 3,300 ft away from host computers, while CLE 500 models allows distances up to 1,640 ft from camera to computer. Transmitters and receivers are connected using CFSM simplex fiber-optic cables, while...
Read More »
Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »
