Electronic Converters

Electronic Converters

Buck Regulators address multiple voltage rail requirements.

Integrating both high-side and low-side field-effect transistors, ModelsÂ- ISL85410 and ISL85418 eliminate need for low-side diode and external compensation. Synchronous buck regulators down-convert DC voltage from power supply or battery to power multiple microprocessors and board components at various voltage requirements, minimizing power loss. Housed in 4 x 3 mm package, devices...

Read More »
FOR-A to Make First Appearance at Satellite 2014
Electronic Converters

FOR-A to Make First Appearance at Satellite 2014

Cypress, CA – FOR-A announces plans to display several highlights in its product range, including video encoder, signal processor, and frame rate conversion technology, at the upcoming SATELLITE Conference and Exhibition. Held March 10-13 at the Walter E. Convention Center in Washington, D.C., FOR-A will make its debut at SATELLITE in booth 3113. “FOR-A offers a number of products that lend...

Read More »
Data Converters drive 100G, 300G, and 400G active optics.
Electronic Converters

Data Converters drive 100G, 300G, and 400G active optics.

Using 25G VCSEL and PIN devices, TIA amplifier, and driver IC, Coolbit optical engines convert data from electrical signals to optical signals and drive technology behind TE 100G, 300G, and 400G active optics. Platform engines help communication systems conserve power, and QSFP28 modules perform at < 1 .5 W per transceiver. Optical engines enhance performance while satisfying high density and...

Read More »
Electronic Converters

Analog-to-Digital Converter provides RF sampling at 4 GSPS.

Measuring 9 x 9 mm, 12-bit Model ADC12J4000 supports JEDEC JESD204B serial interface standard for data converters up to 8 Gbps, while consuming 1.9 W of power. Device combines giga-sample ADC IP with low-power digital processing blocks that provide digital filtering and down conversion. IC can perform external signal conditioning typically handled by FPGA at total decimation of 4/8/10/16/20/32x,...

Read More »
Analog-to-Digital Converters (12-bit) offer 5 analog input ranges.
Electronic Converters

Analog-to-Digital Converters (12-bit) offer 5 analog input ranges.

Offering 8 Â-µsec conversion time, ADC-85 series comes in hermetically sealed, 32-pin, side-brazed DDIP or gull-wing SMT ceramic package. Each unit features ½ LSB linearity and is 100% tested for performance across one of 3 temperature ranges: 0 to +70°C, -40 to +100°C, and -55 to +125°C. Along with parallel and serial digital outputs, units feature...

Read More »
Electronic Converters

High-Resolution ULP SAR ADCs consume 5.5 mW at 1 MSPS.

Available in 10-pin, 3 x 4.9 mm MSOP and 3 x 3 mm QFN package options, single-channel ADC8881 series includes 18- and 16-bit SAR (successive approximation register) ADCs with speed options from 100 kSPS to 1 MSPS. Input common-mode range simplifies signal conditioning andÂ- helps digitize difference between 2 independent sensor signals with widely varying common-mode voltage...

Read More »
Electronic Converters

Current to Voltage Converter is ready for analog ASIC integration.

Using Transimpendance Amplifier architecture with 8 digitally programmable current ranges from 8 Â-µA to 1 mA, SCi310 Analog Front End IP block converts current captured from sensor system to fully differential output voltage that is ready to be amplified. Precision I/V converter block maintains constant voltage at input pin for all operating modes and input currents while enhancing...

Read More »
Electronic Converters

JESD204B-Compatible, 16-bit DAC runs at up to 2.5 GSPS.

Suited for multimode 2G/3G/4G cellular base stations,Â- 2.5 GSPS DAC38J84 (4-channel) supports JEDEC JESD204B serial interface standard for data converters up to 12.5 Gbps. Pin-compatible 16-bit DAC38J82 (2-channel) runs at 2.5 GSPS. Dual independent transmit paths of DAC38J84, which also integrates multi-band summation block, provide up to 1 GHz of complex information bandwidth...

Read More »
Electronic Converters

Signal Converter offers dimming control for 80 fixtures.

Extracting dimming levels and address information from incoming DALI data, Model DAP-04 controls each of 4 PWM dimming outputs individually. Each channel can drive PWM input of any MEAN WELL LED power supply equipped with 3-in-1 dimming function. Model DAP-04 offers 1–100% dimming range, and choice of linear or logarithmic dimming curves which comply with IEC62386-207. Built-in relay and...

Read More »
Electronic Converters

Discrete Serial Link Aggregator ICs support data rates to 10 Gbps.

Using 2 power rails, 1- to 8-channel TLK10081Â- and 2-channel TLK10022 aggregate and de-aggregate point-to-point serial data streams for transmission over backplanes, copper cables, and optical links. Features include intelligent serial link switching and built-in digital equalization. While TLK10022 supports 4:1, 3:1, and 2:1 bidirectional serial link configurations, TLK10081...

Read More »
Dodge&reg; Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics