Electronic Converters

AMC Board combines dual DACs and FPGA.
Electronic Converters

AMC Board combines dual DACs and FPGA.

Suited for RADAR signal processing and jamming applications, Model AMC529 combines functionality of FPGA Carriers and digitizing FMCs. Board includes clock jitter cleaner and on-board clock generation as well asÂ- dual digital-to-analog converters that are rated 14-bit at 2.85 GSPS. On-board Virtex-7 FPGA has 3 banks of 144 Mbit QDR-II memory that is 36-bit wide plus 1 Gbit of 16-bit DDR3...

Read More »
Electronic Converters

Mini/DisplayPort to HDMI Cables support Ultra HD 4K video.

Supporting Ultra HD 4K video and available in various lengths and colors, DisplayPort™ to HDMI® and Mini DisplayPort™ to HDMI cables respectively connect DisplayPort- and Mini DisplayPort-equipped computer to HDMI-enabled display or projector. These adapter cables eliminate need to use separate signal adapter, and included passive signal conversion eliminates need for additional power...

Read More »
Bidirectional DC-DC Converter suits energy storage systems.
Electronic Converters

Bidirectional DC-DC Converter suits energy storage systems.

Intended for solar or wind powered energy storage systems, 2,500 Watt Model EZA2500-32048 can automatically, and continuously, change conversion direction from grid side 320 Vdc nominal to battery side 48Vdc nominal. Output voltage and current can be programmed or monitored using RS-485 communications port. Suitable for mounting inÂ- cabinets measuring 423 x 400 mm and 1U high, converter...

Read More »
Signal Splitter allows dual transmissions.
Electronic Converters

Signal Splitter allows dual transmissions.

Used with 7.5 or 15 mm rails, DIN Mounted Interface Converter enablesÂ- outputs from single encoder to be sent to 2 control systems. Unit provides signal level conditioning to support both RS422 and HTL input or outputs. Galvanic isolation up to 1 kV between input and outputs prevents current loops and signal crosstalk from occurring. Powered by 9–30 Vdc supply, which is then distributed...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Electronic Converters

Low Noise Block Downconverters leverage stable crystal.

Available in standard and extended frequencies, 5000 Series comprises PLL LNBs (Low Noise Block Downconverters)Â- which contain crystal resonating at specific frequency. LO (Local Oscillator) stabilities of ±50, ±75, ±100, and ±250 kHz meet needs of varying applications and environments. Areas of use include high-end broadcast applications, including...

Read More »
Electronic Converters

LEMO and Northwire, Inc. Announcing New SMPTE and ARIB Cable to the Broadcast Market

ECUBLENS, Switzerland and OSCEOLA, Wis.Â- — LEMO (www.lemo.com), a global leader in the design and manufacture of precision custom connection solutions, and Northwire, Inc., a LEMO Group Company and manufacturer of wire and cable, will be introducing their new HDTV SMPTE and ARIB cable offerings to the Broadcast Market during NAB, April 13-16, 2015, in Booth C9012.  Working...

Read More »
Electronic Converters

Common Mode Noise Considerations

Common Mode Noise DC/DC converters operate by chopping the DC input voltage into an AC signal then transferring that signal through a transformer. The AC is then rectified back into DC for the output. The output voltage can be adjusted either higher or lower than the input voltage depending on the turns ratio of the transformer. The transformer is made from concentric windings on top of each...

Read More »
DC/DC Converter Module offers up to 481 W/in.³ power density.
Electronic Converters

DC/DC Converter Module offers up to 481 W/in.³ power density.

Incorporating all power handling components in 25.4 x 12.7 x 12.2 mm package, OKLP-X/60-W12A-C 60 A Power Block solution consists of non-isolated buck converter without PWM controller. Unit supports use with analog or digital PWM controllers and providesÂ- regulated 0.6–3.63 Vdc output of up to 60 A from 7–13.2 Vdc input. Suited to use in PoL applications, module delivers energy...

Read More »
Dual ADC FMC features 12-bit @ 4.0 GSPS design.
Electronic Converters

Dual ADC FMC features 12-bit @ 4.0 GSPS design.

Offering dynamic performance, FMC226 consists of dual-ADC, 12-bit at 4.0 GSPS module for RADAR, SIG-INT, wireless infrastructure, RF Sampling SDR, and other applications. FPGA Mezzanine Card (FMC) plugs into any VITA 57-compliant board, and ultra-low noise wideband PLL provides precision timing and clean signals. Analog input, clock input, and trigger inputs are routed via SSMC connectors;...

Read More »
DAC supports all wireless and mobile device frequency standards.
Electronic Converters

DAC supports all wireless and mobile device frequency standards.

Offering dynamic range performance in 100–300 MHz band for complex IF transmitters, AD9154 quad-channel, 2.4 GSPS, 16-bit DAC includes on-chip PLL and 8-lane JESD204B interface.Â- Feature set, which includes complex digital modulation, input-signal power detection, and gain/phase/offset compensation, lets designers use one device to meet all requirements in multicarrier GSM/LTE...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics