Industrial Media Converters are offered in 6 models.
JetCon 2401 RS-422/485-to-multi mode fiber converter transmits over distances to 2 or 30 km. JetCon 2301 Industrial Ethernet-to-Fiber Rail-Converter transmits up to 2 or 50 km. JetCon 2101 and 2101i are industrial RS-232-to-RS422/485 Rail-Converters. Latter is designed with optical isolation. If transmission is longer than 1.2 km, isolated JetCon 2101ir is suited for repeating connecting...
Read More »
Serial-to-Ethernet Kit eliminates designing from scratch.
Multi-Port Serial-to-Ethernet Kit allows multiple ports to convert data from serial to Ethernet. It also enables bi-directional conversion from Serial-to-Ethernet and Ethernet-to-Serial. Kit provides hardware and software necessary for sensors and other serial devices to communicate via LAN or other network. Implementation of optional RabbitWeb software module lets user web-enable applications to...
Read More »
Sampling ADCs feature noise levels to 150 -µVrms.
Analog-signal-processing (ASP), multi-chip ADSD-1410 uses active laser trimming of thin-film resistors, weaving different semiconductor chips into one ASP function. It has 2 input channels, wideband (30 MHz) sample-hold amplifiers, and independently clocked, 14-bit, 10 MSPS ADCs. Housed in 28-pin, double-DIP, ceramic package, unit employs proprietary gate array that provides timing and control...
Read More »
Modules offer sixteen 16 bit D/A converters per board.
IP231 Industry Pack mezzanine module allows simultaneous D/A conversion across all channels, which enables unit to write sixteen 110 V outputs in 135 seconds for high-speed processing. Users can populate VME, PCI, or CompactPCI mezzanine carrier card with up to 5 IP231 modules for high-density single-slot solution. Optional versions offer extended temperature ratings for harsh environments.
Read More »
MITIGATING OPTICAL SUPPLY CHAIN RISKS
This white paper provides an overview into mitigating the optic supply chain, common issues and proposed solutions.
Read More »
Analog-to-Digital Converter offers 4 kHz multiplexing rate.
With variable speed/resolution, 24-bit Delta Sigma Model LTC2447 features multiplexing architecture to digitize multiple ratiometric sensors. Four differential inputs, coupled with 4 differential reference inputs, allow ratiometric measurements of multiple RTDs, bridges, and pressure sensors. Fifth differential reference can be shared by any or all inputs. For low output rate applications, ADC...
Read More »
Analog-to-Digital Converter features 50 kHz bandwidth.
Model ADS1271 offers 1.8 Ã-µV/C offset drift with low in-band noise of 6.5 Ã-µV rms. Onboard linear phase decimation filter suppresses modular and signal out-of-band noise, providing signal pass-band of 90% of Nyquist rate with less than 0.005 db ripple. With 3 selectable operating modes, 24-bit unit offers 105 kSPS data rate, 109 dB SNR resolution, and power dissipation of 35 mW....
Read More »
Fiber Optic Converter suits control cabinet applications.
Model PSI-MOS transmits fiber optic data for serial communication interfaces and bus systems. By converting electrical copper-based signals to glass or polymer fiber technology, it allows isolation of Interbus, Profibus, Modbus, DeviceNet, CANopen, RS-232, and other RS-485 networks. Onboard diagnostics provide information about signal quality on fiber optic path. If failure occurs, each module...
Read More »
Converter Pair acts as data transceiver.
LTX-5510 Electrical/Optical - Optical/Electrical converter pair digitizes analog input signal to 12 bit precision, along with 4 auxiliary digital inputs, and transmits data over Gbit fiber optic link. LTX-5510R receives transmitted data and reconstructs 5 signals at far end of link. Transmitter has selectable input ranges, Ã-
Read More »
Analog-to-Digital Converters target audio applications.
Models PCM4202 and PCM4204 are 2- and 4-channel converters featuring 118 dB dynamic range and -105 dB total harmonic distortion. Both devices support 24-bit linear PCM output data, with sampling frequencies up to 216 kHz, and can be configured to output either 64x or 128x oversampled, 1-bit direct stream digital data for each channel. DSD input mode allows 1-bit DSD to 24-bit PCM data format...
Read More »
ADC Family consumes power at rates down to 230 mW.
Available in 32-pin, 5 x 5 mm QFN package, LTC2220 ADC family include models that range from 10-170 Msps at 12- and 10-bit resolution, as well as 14-bit converters to 80 Msps. Optimized for undersampling, 3 V converters operate at high Intermediate Frequencies (IF); LTC2249 features 575 MHz bandwidth and achieves 85 dB SFDR up to 140 MHz input. Pin-compatible versions, at sample rates of 65, 40,...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
