DC-DC Converters feature 1 x 0.8 x 0.4 in. compact format.
Accommodating 2:1 input range, 10 Watt JCA10 Series offers choice of 4 nominal input voltages of 5, 12, 24, and 48 Vdc. Inputs are 4.5–9.0, 9–18, 18–36, orÂ- 36–75 Vdc with under-voltage lockout as standard. For each input voltage, single output models offer +3.3, +5, +12, or +15 Vdc outputs, while dual output versions provide ±5, ±12, or ±15 Vdc. Outputs are fully...
Read More »SAR ADC offers 4 user-programmable operating modes.
Offering drop-in upgrade to Analog Devices AD7887A, 12-bit Model TS7001 combines 10 MHz track-and-hold, 3-wire serial digital interface, and internal ±0.5% initial accuracy +2.5 V reference. Two-channel device operates from +2.7–3.6 V supplies and consumes approximately 3 mW when converting at 187.5 ksps. Housed in MSOP-9 package, IC provides ±1 LSB INL performance andÂ- is...
Read More »Nuwaves Engineering Selected to Provide RF Subsystems for Viasat
Middletown, Ohio- NuWaves Engineering, an international Radio Frequency (RF) and Embedded Systems solutions provider, announced today that two of its module-level RF products, the Multi-Octave RF Upconverter (MORF(TM)) and the ConvertaWave2(TM) Downconverter, have been selected by ViaSat Inc. to be embedded in the company's VRG-1000 RF Signal Environment Generator product line. NuWaves' MORF...
Read More »Octal 12-Bit 100 MSPS ADC uses less than 80 mW per channel.
Suited for medical and industrial imaging, ADS5295Â- helps minimize board heat and power dissipation in higher-channel-density applications. Digital processing block combines digital functions – low-frequency noise suppression mode, digital filtering options, programmable mapping of LVDS output pins – to improve SNR and filter harmonics while reducing output data rate for narrow-band...
Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Check out this white paper to see how the IoT can be used in your hotel to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.
Read More »Agilent Technologies Introduces Enhanced Solution for PCI Express® 3.0 Receiver Characterization
J-BERT N4903B Handles PCIe® 3.0 SKP Ordered Set Length Changes During Receiver Characterization SANTA CLARA, Calif. - Agilent Technologies Inc. (NYSE: A) today announced an enhanced solution for PCI Express® 3.0 receiver characterization, at DesignCon. The Agilent PCIe® 3.0 receiver characterization solution provides complete and accurate receiver tolerance test results while...
Read More »Gigabit Ethernet Converter features RJ45 and SFP port.
Modular, plug-and-playÂ- C0310001 converts Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). With respective transmission distances of up to 80 km and 550 m, media converter works with single- and multi-mode fiber and operates at 1,310/1,550 nm in single fiber WDM and 850 nm in multi-mode. Along with auto-negotiation, features...
Read More »
Frame Rate Converter provides automatic conversion modes.
In addition to simultaneous HD and SD output and optional front touch panel, FRC-8000HS offersÂ- software with ability to customize settings based on specific needs. Broadcasters have range of control parameters and can select from normal, sports, or winter sports as menu setting. Latter optimizes conversion process in environments with high-speed moving objects in highly saturated...
Read More »
Digital Downconverter suits wideband radar and SDR applications.
Preconfigured with programmable 1- or 2-channel digital downconverter loaded into onboard Xilinx Virtex-6 FPGA, Model 71641 is capable of digitizing one 12-bit channel at 3.6 GHz or 2 channels at 1.8 GHz. Each DDC has independent 32-bit tuning frequency programmable from DC to ƒs, where ƒs is A/D sampling frequency. In single channel mode, DDC decimation can be programmed to 8x, 16x, or 32x. In...
Read More »MediaTek Launches World's 1st 3-SWP (Single-Wire Protocol) NFC Solution for Adoption in Mainstream Mobile Platforms
HSINCHU, Taiwan- MediaTek Inc., a leading fabless semiconductor company for wireless communications and digital multimedia solutions, today announced the availability of the MT6605, the world's 1st dual-SIM plus 1 micro SD card capable Near Field Communications (NFC) solution positioned to expand the adoption in and usefulness of mainstream mobile platforms. Featuring a unique 3-SWP (single-wire...
Read More »
Fresh Ideas for the Boundary Scan World
Preview for the print media for JTAG Technologies for Apex 2013, San Diego - February 19-21st, 2013 - Booth # 910 Eindhoven, The Netherlands- JTAG Technologies, provider of innovative JTAG/boundary-scan products for electronics test and debug, will showcase amongst other new products the latest soft-and hardware developments: Analogue Testing Made Easy - JT 2149/DAF I/O module for digital and...
Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.
Read More »
