DC/DC Converters come in IC-style surface mount packages.
Comprising 9 models with efficiency levels up to 70%, 1 Watt NTF Series is available with choice of 4-6, 9-15, and 18-36 V input voltages and tightly regulated output voltages of 5, 12, or 15 V. All devices provide 1 kVdc isolation and include voltage trim feature. Measuring 0.7 x 0.5 x 0.228 in., RoHS-compliant converters feature power density of 0.7 W/cmÃ-³, operating temperature of -40 to...
Read More »
Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks
Electro Standards Laboratories (ESL), Cranston, RI, has just announced its new family of products designed for Casino VLT Networks. The four models of HP Fiber to RS-232 and RS-485 converters allow connection of HP Fiber Optic Linked Terminals to the RS-232 and RS-485 ports of controllers. The Model 4154 HP Fiber Repeater with RS-232 Traffic Monitor Port is used to regenerate data signals in...
Read More »
Optical-to-Electrical Converter features rugged design.
Housed in compact extruded aluminum enclosure, J740 performs wideband analog conversion of fast fiber-coupled signals from DC to greater than 1 GHz. It features calibrated conversion gain of 1 V/mW (0.5 V/mW into 50W) and is compatible with single and multi-mode fiber. Available in 850, 1,310, and 1,550 nm wavelengths, unit suits applications including high-speed data links, fiberoptic test and...
Read More »ADC Mezzanine Card offers 6 GB/sec data throughput.
Available in both air-cooled and conduction-cooled rugged versions, ADC512 FPGA Mezzanine Card is 3 GS/sec, 8-bit ADC card that routes high-speed ADC I/O directly to host board FPGA via FMC connector. Dual-channel card's ADC devices support sampling rate of 3,000 MS/sec per channel. By routing ADC interfaces directly to FMC connector, ADC512 enables FPGA on host board to directly control and...
Read More »
Mitigating Supply Chain Risks for Sheet Metal Components
This ebook provides an overview into mitigating supply chain risks for sheet metal components.
Read More »DC/DC Converter features integrated APD current monitor.
With integrated high-side avalanche photodiode current monitor, LT3571 provides better than 10% relative accuracy over -40Ã-
Read More »
Low Power Computer Captures and Transmits Remote Data
The JK microsystems DataMover offers an economical solution to remote data capture and transmission. By integrating optional GPS receiver, GPRS cell modem and sleep-mode power controller in a die cast aluminum enclosure, the DataMover is capable of logging and transmitting data from remote or inaccessible locations. With power consumption of less than one watt during operation and less than 3...
Read More »Microchip Technology Recognized for Leadership and Innovation
Company Honored by National and Arizona Publications for Product and Business Excellence CHANDLER, Ariz., Jan. 27, 2009 [NASDAQ: MCHP] - Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, today announced that it has been recognized by the following business and electronics organizations for product and workplace leadership. As a worldwide leader in...
Read More »Single-Channel DACs feature low power of 80 -µA at 1.8 V.
Available in SC70 package, 16-bit pin-compatible DAC8411 family has power supply range of 1.8-5.5 V and settling time of 6 Ã-µsec. They utilize 3-wire serial interface that operates at clock rates up to 50 MHz, and have operating temperature of -40 to +125Ã-
Read More »Media Converter operates in temperatures from -40 to +75-
Designed to convert 10/100Base-TX Ethernet signals to 100Base-FX fiber, iCON-32900 series converter accepts voltage range from 12-48 Vdc. Features include Link Fault Pass-through (LFP) function which allows tracing network link failure; 2 redundant power inputs for non-stop operation; and relay output alarm. Offered in IP20 aluminum housing, unit meets NEMA TS1/2, UL1604, and UL60950 standards...
Read More »
Converter Module translates encoder data to USB 2.0 format.
Dual Encoder to USB Converter module can handle signals from 2 SSI absolute encoders or 2 quadrature incremental encoders. Using PC interface, module can be programmed through USB port for number of bits with absolute encoders, and for incremental encoders count mode (X1, X2, X4), reset, preset, and preset/reset on index are also programmable. Module is suited for system setup and debugging, data...
Read More »
Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse
A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.
Read More »
