New IMC-C100-XX Series Industrial Media Converter Comes with Link Fault Pass Through Function
IMC-C100-XX Series Industrial Media Converter are offered in 12~48 VDC redundant power inputs with reverse polarity and overload current protection. The units features built-in Far End Fault (FEF) function and are available in Multi-Mode and Single-Mode models. The converters support DIN-Rail or wall mountable orientations and provide -10°C to 70°C operating temperature range. These are...
Read More »
New IMC-C100-XX Series Industrial Media Converter Comes with Link Fault Pass Through Function
IMC-C100-XX Series Industrial Media Converter are offered in 12~48 VDC redundant power inputs with reverse polarity and overload current protection. The units features built-in Far End Fault (FEF) function and are available in Multi-Mode and Single-Mode models. The converters support DIN-Rail or wall mountable orientations and provide -10°C to 70°C operating temperature range. These are...
Read More »
New Industrial PoE+ Media Converters are Compliant to 802.3at Standards
The IMP-C100-XX Series PoE+ Media Converters are available in Multi-Mode and Single-Mode models and come with 10/100TX Ethernet port and a fixed fiber interface. The units feature built-in Link Fault Pass Through (LFP) and Far End Fault (FEF) functions with 48~55VDC redundant power inputs. The converters provide extended operating temperature (EOT) from -40°C to 80°C. The units are offered with...
Read More »
New Industrial PoE+ Media Converters are Compliant to 802.3at Standards
The IMP-C100-XX Series PoE+ Media Converters are available in Multi-Mode and Single-Mode models and come with 10/100TX Ethernet port and a fixed fiber interface. The units feature built-in Link Fault Pass Through (LFP) and Far End Fault (FEF) functions with 48~55VDC redundant power inputs. The converters provide extended operating temperature (EOT) from -40°C to 80°C. The units are offered with...
Read More »
Understanding OSHA Citations and Staying Compliant
This white paper will individually examine the most common OSHA topics, give solutions on how to meet OSHA workplace standards, and provide a checklist to check your own company's compliance.
Read More »
New ADC/DAC Modules Offer Signal Processing Bandwidth at over 20 TeraMACs of DSP Compute Performance
VadaTech ADC/DAC Modules are available in AMC587 and AMC588 models. AMC587 offers 12-bit ADC with sample rates of up to 6.4GSPS or quad inputs at 3.2 GSPS. AMC588 module provides eight transceivers channels with a frequency range of 300 MHz to 6 GHz. AMC587 is suitable for capture analysis in COMINT/SIGINT applications, whereas the AMC588 is used in SDR, BTS and antenna systems. Both modules come...
Read More »
New ADC/DAC Modules Offer Signal Processing Bandwidth at over 20 TeraMACs of DSP Compute Performance
VadaTech ADC/DAC Modules are available in AMC587 and AMC588 models. AMC587 offers 12-bit ADC with sample rates of up to 6.4GSPS or quad inputs at 3.2 GSPS. AMC588 module provides eight transceivers channels with a frequency range of 300 MHz to 6 GHz. AMC587 is suitable for capture analysis in COMINT/SIGINT applications, whereas the AMC588 is used in SDR, BTS and antenna systems. Both modules come...
Read More »
New Software Radio Receiver Features Two A/D Acquisition IP Modules for Simplifying Data Capture and Transfer
Pentek introduces 71865 XMC, a Software Radio Receiver with 200 MHz 16-bit A/D channelizer, 762 narrowband digital down converters and four wideband DDCs. The acquisition IP module includes a powerful controller for data clocking, triggering and synchronization functions. The four wideband DDCs set decimation values within 8 to 128 and provides output bandwidths from 1.25 MHz to 20 MHz. This...
Read More »
New Software Radio Receiver Features Two A/D Acquisition IP Modules for Simplifying Data Capture and Transfer
Pentek introduces 71865 XMC, a Software Radio Receiver with 200 MHz 16-bit A/D channelizer, 762 narrowband digital down converters and four wideband DDCs. The acquisition IP module includes a powerful controller for data clocking, triggering and synchronization functions. The four wideband DDCs set decimation values within 8 to 128 and provides output bandwidths from 1.25 MHz to 20 MHz. This...
Read More »
Gaming Innovation Group use Perle Media Converters in new iGaming Cloud Data Center in Malta
10G Media Converters bridge connectivity between Fiber and 10GbE Copper NASHVILLE, TN—May 30th, 2018 — Online gaming operators are in fierce competition to dominate in a market that is forecast to hit $59.79 billion dollars by 2020.* Often, they will seek out solutions like Gaming Innovation Groups ‘iGaming Cloud’ (iGC) to eliminate technological bottlenecks and significantly reduce costs...
Read More »
Gaming Innovation Group use Perle Media Converters in new iGaming Cloud Data Center in Malta
10G Media Converters bridge connectivity between Fiber and 10GbE Copper NASHVILLE, TN—May 30th, 2018 — Online gaming operators are in fierce competition to dominate in a market that is forecast to hit $59.79 billion dollars by 2020.* Often, they will seek out solutions like Gaming Innovation Groups ‘iGaming Cloud’ (iGC) to eliminate technological bottlenecks and significantly reduce costs...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
