
Model 71821 Data Converter works on Xilinx Kintex UltraScale FPGA.
Suitable for Digital RF memory applications, Model 71821 Data Converter is designed with ADS5485 200 MHz, 16-bit A/D converters, DAC5688 DUC upconverter and D/A stage. Featuring three A/D acquisition modules for easy capturing and moving of data, unit comes with DDR4 SDRAM, gigabit serial lanes and LVDS general purpose I/O lines. Enabling data multiplexing and channel selection functions,...
Read More »
Gigabit Ethernet-to-Fiber Media Converter offers speeds up to 1000Mbps.
Featuring 10/100/1000TX Ethernet port and dual rate 100/1000 SFP slot, IMC-C1000-SFP Series Gigabit Ethernet-to-Fiber Media Converter comes in compact IP-30 rated package and features simple plug-and-play connectivity solution. Applied in factory automation and security, Converter comes with built-in LFP and FEF function and has surge and ESD protection. Unit provides redundant input power of...
Read More »
Millimeter-Wave Assemblies are fully integrated.
Being compact at 4 in. x 4 in. x 1.5 in., Upconverter and Downconverter Millimeter-Wave Assemblies can be customized up to 120GHz frequency. Used in advanced millimeter-wave test and telemetry equipment, product integrates amplification, mixing and filtering functions along with complete connections needed for installation. BUC Upconverters offer 25-40dB Gain over 4-10GHz of bandwidth while...
Read More »
Model 71841 XMC Modules offer eight additional gigabit serial lanes.
Suitable for extremely wideband signal applications, 71841 1-channel, 3.6 GHz 12-bit A/D or 2-channel, 1.8 GHz 12-bit A/D XMC converter module is designed to operate with wide range of carrier boards in PCIe, 3U & 6U VPX, AMC, and 3U & 6U Compact PCI form factors. Unit enables functions like data multiplexing, channel selection, data packing, triggering and memory control. With programmable...
Read More »
Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »MAX11410 Delta-Sigma ADC features sleep mode of less than 1μA.
Suitable for applications like multiple RTD, thermocouple and pressure sensors, MAX11410 10-channel 24-bit delta-sigma ADC features 1 to 128 programmable gain amplifiers with 1nA input current. Available in tiny 4mm x 4mm TQFN package, unit operates in temperature range of -40 to 125°C. With respective analog and I/O supply range of 2.7 to 3.6 V and 1.7 to 3.6 V, ADC enables up to 90dB...
Read More »
LCIS Product Series comes with universal input/output mounting option.
Featuring symmetrical housing design, LCIS series products provides clear identification of terminal markings. Delivering efficient wiring via push in termination, products come with LED status indicator. Operating at -25°C to +60°C temperature, units are designed with isolated jumper connections. Suitable for harsh environments, units are UL listed and measures 6.2 mm and 17.5 mm housing width.
Read More »
AD400x SAR ADCs feature internal overvoltage protection.
Available in 20-, 18-, and 16-bit models, use of AD400x SAR ADCs ease the efforts of system designers in achieving optimum performance in data acquisition designs with shorter design cycle. AD4003-18 bit and AD4003-16 bit ADC offer 100.5 dB SNR and 93 dB respectively. Featuring high input-impedance mode and span-compression mode, units reduce design challenge and increase the flexibility of...
Read More »
Multi-channel Analog-to-Digital converters, ADS-429 from Datel f featuring 12-bit resolution.
Offered in 2 COTS grades: ADS-429SE (-40 to +105-°C) and ADS-429SM (-55 to +125-°C), Datel’s Multi-channel Analog-to-Digital converters offer 12-bit resolution in 16-pin plastic TSSOP package. Featuring no missing codes of Differential and Integral Non-Linearity, ADC operates on +2.7 to 5.25 Volts and 3mA and consumes only 8uA in sleep mode. With SNR of 73dB and THD of -85dB, unit features 8...
Read More »
HMC8100 and HMC8200 Rx/Tx Converter feature 3 integrated power detectors.
Suitable for microwave and millimeter wave mobile operators and telecom equipment manufacturers, HMC8100 and HMC8200 Rx/Tx converters feature a wide array of functions, replacing multiple discrete parts to provide a single-source, high-performance solution for microwave backhaul applications. HMC8100 IF receiver chip provides IF signal of 140 MHz at its output, and includes 2 voltage gain...
Read More »
RF Upconverter supports 2 MHz to 3 GHz systems.
Accepting user-programmable IF input signal from 2–70 MHz, Model RF2-3000UCV1 delivers RF output at any user-programmable frequency between 2 MHz and 3 GHz, with tuning resolution of 5 kHz. Multi-octave device has 50 dB of attenuation control with incremental steps of 0.5 dB. Housed in 1.0 x 2.5 x 3.5 in. ruggedized aluminum enclosure, upconverter operates at 6 Vdc and features SMA RF...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »