Electronic Boards

Mini PCI Express Cards withstand harsh environments.
Electronic Boards

Mini PCI Express Cards withstand harsh environments.

Measuring 30 x 51 mm, mPCIe-ICM Series offers 4 or 2 ports of isolated RS232 serial communications. Cards feature Tru-Iso™ 1.5 kV isolation port-to-computer and 500 V isolation port-to-port on all signals at I/O connectors. Designed with type 16C950 UARTS, cards use 128 byte transmit/receive FIFO buffers to minimize CPU loading. RoHS-compliant units operate from -40 to +85°C, offer...

Read More »
Electronic Boards

Multifunction Interface Board adds I/O options to serial devices.

Designed to mount on rear panel of host chassis with connectors protruding through rear panel, Model 9006 adds Ethernet, GPIB, and USB interfaces to RS-232/-485 serial devices. All interfaces are IEEE-488.2 compliant, respond to 488.2 Common Commands, and provide GPIB-like functionality to extent possible with interface protocol. Ethernet port supports VXI-11 and raw socket protocol as well as...

Read More »
PCIe Interface Board adds up to 19.2 Tflops of compute power.
Electronic Boards

PCIe Interface Board adds up to 19.2 Tflops of compute power.

Using Intel® Silicon Photonics technology, High Density Compute Accelerator enables x8 PCIe 3.0 operating at 64 Gbps to be transmitted over MXC passive optical cables. Half-height, half-length adapter card also supports PCIe sideband signals and Spread Spectrum Clock Isolation. Supporting up to 16 Intel® Xeon Phi™ Coprocessors, appliance can be attached to up to 4 servers for...

Read More »
Electronic Boards

Communication Modules expand connectivity for embedded systems.

Via mPCIe interface, EMPL-G201 adds 1 or 2 isolated GigE ports to any embedded system. Daughter board with cable offers 2 RJ45 Ethernet jacks. Also available, multi-port serial module EMP2-X401 adds 4 or 8 serial ports, independently selectable by software, to communicate in either RS232, RS422, or RS485 mode. Flexible cable connects module with up to 8 daughter boards with DB9 serial port and...

Read More »
Communication Modules suit IoT and embedded applications.
Electronic Boards

Communication Modules suit IoT and embedded applications.

Both using mPCIe interface, Model EMPL-G201 adds 1 or 2 isolatedÂ- Gigabit Ethernet ports, while Model EMP2-X401 adds either 4 or 8 serial ports independently selectable by software to communicate in RS232, RS422, or RS485 mode. Both Embedded Peripheral Modules include ESD surge protection that can handle electrostatic shocks up to 15 KV. Modules allow system designers to expand Ethernet or...

Read More »
Controller and I/O Modules operate in harsh environments.
Electronic Boards

Controller and I/O Modules operate in harsh environments.

Comprising controller and I/O modules, X20c series is constructed to handle all environmental conditions. Coating on electronics module protects components and circuit board from effects of condensation and corrosive gases with effectiveness checkedÂ- against BMW GS 95011-4 and EN 60068-2-6 test method 4. Functionally compatible with existing models, series operates from -25 to +60°C...

Read More »
VPX Boards boost functional density.
Electronic Boards

VPX Boards boost functional density.

Suitable for data acquisition, software radio, and digital signal processing, 6U VPX Model 57xxx accommodates one Cobalt® Virtex-6 or Onyx® Virtex-7 FPGA XMC module, while Model 58xxx accommodates 2 XMC modules. Boards take advantage of increased I/O to backplane by adding optional LVDS lines from FPGA on each XMC to user pins of VPX backplane connectors. Optional x4 user-configurable...

Read More »
CAN Cards for PCI Bus support up to 4 high-/low-speed channels.
Electronic Boards

CAN Cards for PCI Bus support up to 4 high-/low-speed channels.

Modularly expandable CAN-IB300/PCI and CAN-IB400/PCI let usersÂ- connect computer to CAN-system for control applications and perform analysis, configuration, and troubleshooting. While CAN-IB300/PCI is passive card, active CAN-IB400/PCI has 32-bit MCU system that enables intelligent handling and active filtering of messages sent and received on card. Interfaces can be equipped with up to 4...

Read More »
Daughter Cards enable comprehensive external interfacing.
Electronic Boards

Daughter Cards enable comprehensive external interfacing.

Available in 6 models, Arduino-compatible VM800P PLUS Boards are based on FT800 EVE graphic controller devices, in which display, audio, and touch functionality are integrated onto single chip. Boards also incorporate 8-bit ATMEGA microcontroller and TFT display with 3.5, 4.3, and 5.0 in. sizes available. Using 1 or 2 Micro-MaTch miniature connectors to interface with VM800P, daughter cards allow...

Read More »
Ruggedized 3U cPCI CPU Board has EN50155-compliant design.
Electronic Boards

Ruggedized 3U cPCI CPU Board has EN50155-compliant design.

In addition toÂ- 22 nm Intel® Atom™ E3827/E3845 CPUs that offer quad-core performance up to 1.91 GHz, CP3010-SA features built-in graphics core via Intel® HD Graphics Technology as well as up to 8 GB of soldered DDR3L memory running at 1,333 MHz. Onboard data storage is provided via CFAST option or soldered SATA Flash SSD and HDD/SSD option on 8HP...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers