PCIe Analog Input DAQ Card has high-density architecture.
Optimized with x1 PCI Express bus, 12-bit 3 MS/s DAQe-2208 samples up to 96 single-ended AI channels with different gain settings and scan sequences. Differential modes for 48 AI channels provide optimal noise elimination. Along with analog and digital triggering and 24 programmable digital I/O lines, card features SSI bus that allows up to 4 cards to be synchronized for expansion of testing...
Read More »Line Interface Unit suits high-density applications.
Providing relay-less board hot swapping, 16-channel T1/E1/J1 Model XRT83VSH316 features selectable RX and TX internal terminations for 75/120, 100, and 110 W lines. Unit has master clock timing generator where only single T1, E1, or 8 kHz clock is needed. Additional features include system side RLOS, AIS, QRSS/PRBS generation/detection; line side RLOS, AIS, QRSS/PRBS generation/detection; DMO...
Read More »Expansion Boards provide cellular data capabilities.
Offering open source cellular communications platform, Goliath-vx provides GPRS/EDGE function, while Goliath-GPS-vx combines GPRS/EDGE and GPS. Each attaches to gumstix(TM) motherboard using 60-pin connector and includes audio, LCD, touch screen, USB host, 3D accelerometer, and battery management. Goliath boards give verdex motherboards full-speed USB access to Siemens MC75 GPRS/EDGE module,...
Read More »RadiSys Showcases Leadership, Innovation through Solutions that Drive Return on Investment, Time to Market
NXTcomm Appearance Highlights Expansion of Award Winning Portfolio of Modular Communications Platforms CHICAGO, June 18 - RadiSys (NASDAQ:RSYS), a leading global provider of advanced embedded solutions, continued to demonstrate its position as the foremost supplier of modular communications platforms through the broadening of its Advanced Telecommunications Computing Architecture (ATCA) product...
Read More »
Choosing the Optimal Electronics Manufacturer
This eBook covers the various factors to consider when selecting an electronics manufacturer, including experience, turnaround times, and more.
Read More »
Arbitrary Waveform Generators provide 125 megasamples/sec.
Based on PCI Express, UF2e-6030 Series includes 4 boards offering choice of 1, 2, or 4 channels and 14-bit resolution. Each channel has its own 14-bit DAC to ensure synchronous output and choice of 3 reconstruction filters giving bandwidths of 25 MHz, 5 MHz, or 500 kHz. Typical dynamic specifications include SNR of better than 61 dB, THD of less than 71.5 dB, and SFDR greater than 72 dB. Boards...
Read More »
SynqNet Interface integrates I/O with motion control.
Model SQIO SynqNet I/O interface boards allow machine builders to integrate custom analog and/or digital I/O hardware with complex, high performance motion into SynqNet network architecture. They provide real-time I/O and remote motion performance diagnostics via SynqNet for in-depth system level visibility, analysis, and control. Time-based capture feature allows users to place high-speed input...
Read More »New Jennic Reference Design Is First to Provide Speech Audio Solution for IEEE 802.15.4 Applications
Jennic's new IEEE802.15.4 voice reference design enables secure full duplex transmission of speech with long battery life for use in point to point and large wireless sensor networks Sheffield, UK, 18 June 2007: Jennic Ltd. has introduced a reference design which enables speech to be transmitted over an IEEE802.15.4 link using the company's JN5139 single chip wireless microcontroller. The ready...
Read More »
Mini-ITX Board suits multimedia applications.
Validated with IntelÃ-® Core(TM)2 Duo fabricated on 65 nm process technology, Model MI910 incorporates Mobile IntelÃ-® GM965 Express Chipset consisting of IntelÃ-® GM965 Graphic Memory Controller Hub and IntelÃ-® I/O Controller Hub with 533 MHz and 800 MHz FSB. Graphics engine is based on IntelÃ-® Graphics Media Accelerator X31000 architecture and operates at core speeds up to...
Read More »Interphase and Surf Complete I-TDM Interoperability Enabling Multi-Media Solution Delivery on AdvancedTCA-® and MicroTCA(TM) Platforms
- Joint Solution Enables Cost-Effective Development of IP-to-TDM Applications for VoIP, 3G and IMS Networks PLANO, Texas and YOKNE'AM, Israel, June 14 // -- Interphase Corporation (NASDAQ:INPH), a leading provider of robust building blocks, highly integrated subsystems and innovative gateway appliances for the converged communications network, and Surf Communication Solutions ( Surf ), a leading...
Read More »USB Modules enable high-speed data acquisition.
Compatible with both USB 1.1 and USB 2.0, Models USB-1608HS and USB-1608HS-2AO provide true simultaneous data capture of up to 8 channels of 16-bit single-ended or differential analog input at 250 kHz/channel. Both include 16 bits of digital I/O and extensive suite of software. Model USB-1608HS-2AO has 2 additional channels of 16-bit analog output with range of -10 to +10 V. Both use separate A/D...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
