Electronic Boards

Daughter Card facilitates digital power control design. .
Electronic Boards

Daughter Card facilitates digital power control design. .

Available for C2000™ Piccolo™ TMS320F28069M LaunchPad development kit, Digital Power BoosterPack helps users understand digital power development using real-time control architecture of TI's C2000 microcontrollers. Operating on 18 W, BoosterPack integrates TI's CSD87588N NexFET™ power block, LM5109B and UCC27424 FET drivers, and OPA353 op amp, all within small form factor....

Read More »
AAEON Showcases Customization Potential with the Award-Winning PICO-BT01 Board
Electronic Boards

AAEON Showcases Customization Potential with the Award-Winning PICO-BT01 Board

(Taipei, Taiwan)Â- – AAEON®, a major developer of industrial computing solutions, will soon announce the availability of the PICO-BT01 board, winner of the 23rd Taiwan Excellence Awards. Measuring 100mm x 72mm, this PICO-ITX board is among the smallest in the company’s Single Board Computer (SBC) offerings. In addition, a heat-spreader can be installed to the board’s underside to...

Read More »
PCIe Card connects PC to any industrial Ethernet network.
Electronic Boards

PCIe Card connects PC to any industrial Ethernet network.

Based on Anybus CompactCom technology, IXXAT INpact is available in standard and low-profile formats and supports all leading industrial Ethernet standards. Users can connect PC-based slave application to EtherCAT, EtherNet/IP, Modbus TCP, PROFINET IRT/RT, Powerlink, and standard TCP/IP. With NP40 multi-protocol processor, FPGA-based concept, and uniform driver interface, IXXAT INpact is suited...

Read More »
MikroElektronika & FTDI Chip Introduce Multi-Faceted FT90X MCU Development Platform
Electronic Boards

MikroElektronika & FTDI Chip Introduce Multi-Faceted FT90X MCU Development Platform

FTDI Chip technology partner MikroElektronika has announced the release of a complete ecosystem of development products to support the FT90X series of 32-bit application-optimized microcontroller units (MCUs). Through these products, which incorporate both hardware and software elements, engineers will be able to harness the full potential of FT90X MCU devices and make more inspiring embedded...

Read More »
Matrox C-Series Multi-display Graphics Cards Honored with AV Technology "Best of Show Award"
Electronic Boards

Matrox C-Series Multi-display Graphics Cards Honored with AV Technology "Best of Show Award"

Pro AV users, integrators and editors impressed with C-Series performance specifications and booth demonstrations at ISE 2015 MONTREALÂ- – Matrox® Graphics Inc. today announced that Matrox C-Series™ multi-display graphics cards won the AV Technology Best of Show Award at ISE 2015. “Winning multiple awards at the world’s biggest AV show is testament to the versatility of...

Read More »
PCIe Gen3 Expansion Solution works with MicroTCA, other systems.
Electronic Boards

PCIe Gen3 Expansion Solution works with MicroTCA, other systems.

PCIe-compliant module, PCI123, routes x16 PCIe Gen 3 out of front panel ports. Utilizing SFF-8644 connectors, signals can be partitioned as single x16, dual x8, or quad x4 as required. Module supports aggregate raw data rate up to 128 Gbps and can be cabled to UTC006 MicroTCA Carrier Hub (MCH) for PCIe Expansion. Offering quad SFF-8644 ports for PCIe Gen3 expansion (x16, x8, or x4) and PCIe...

Read More »
Configurable XMC Modules feature Xilinx Kintex-7 FPGA.
Electronic Boards

Configurable XMC Modules feature Xilinx Kintex-7 FPGA.

XMC-7K series feature reconfigurable Xilinx® Kintex™-7 FPGA and 128M x 64-bit DDR3 SDRAM. Eight-lane, high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial Rapid I/O, 10 GbE, and Xilinx Aurora implementations are supported. While rear I/O provides 4- or 8-lane, high-speed serial interface on P16 XMC port, select I/O or LVDS pairs plus global clock pairs...

Read More »
MicroTCA.4 System suits data acquisition applications.
Electronic Boards

MicroTCA.4 System suits data acquisition applications.

Intended for large control and data acquisition applications, NAT-MCH-PHYS80 addresses requirements for high bandwidth to both AMCs and rear transition slot of MCH as well as for optical and copper uplinks in PCIe-based MTCA.4 systems. Board providesÂ- PCIe bandwidth of 128 Gbps to local main CPU; supports cascading of MicroTCA.4 systems to increase number of PCIexpress slots to 24, 36, 48,...

Read More »
Matrox C-Series Multi-display Graphics Cards Win Best of Show Award at ISE 2015
Electronic Boards

Matrox C-Series Multi-display Graphics Cards Win Best of Show Award at ISE 2015

Installation’s judges recognize Matrox C-Series’ ability to deliver a new level of functionality and flexibility to multi-screen installations MONTREALÂ- – Matrox® Graphics Inc. today announced that Matrox C-Series™ multi-display graphics cards won the Installation Best of Show Award at ISE 2015. “Matrox is honored to be recognized with this prestigious award from...

Read More »
Deployable Half-Size PCIe FMC Carrier offers optical interface.
Electronic Boards

Deployable Half-Size PCIe FMC Carrier offers optical interface.

Along with Virtex-7 FPGA, Flexor™ Model 7070 PCIe FMC (FPGA Mezzanine Card) carrier features VITA 57.1 FMC site; 4 GB DDR3 SDRAM; PCIe (Gen 1, 2, and 3) interface up to x8; optional 12x user-configurable gigabit serial I/O; and optional LVDS connections to FPGA for custom I/O. Gigabit serial interface, with optional optical transceivers, makes 12 full duplex optical lanes available to MTP...

Read More »

All Topics