CampactPCI Enclosures are 2U and 4U high.
Suitable for VoIP, internal gateway and wireless server markets, 2U and 4U high carrier-class enclosures offer hot-swappable power supplies; hot-swappable, front-loading, air-intake fan canisters and fans; and various backplane options. Versions with -48 Vdc inputs are equipped with dual isolating diodes. Enclosures are equipped with provisions for front or center-mounted rack ears for 19 and 23...
Read More »
Wall Mount Enclosures offer single and double door models.
SN wall mount enclosures are equipped with foamed-in-place gasketing, 180Ã-
Read More »
Electronic Enclosures are offered in additional sizes.
PN Series enclosures have outside dimensions ranging from 3.94 L x 3.94 W x 2.17 H in. to 7.87 L x 5.91 W x 2.95 H in. They are designed and constructed to conform to NEMA 4X and IEC 529 IP65 requirements. Recess in cover accommodates labels, decals, nameplates, and keypads. Each size enclosure is offered in 3 styles: solid body and cover in light gray polycarbonate, solid body and clear cover in...
Read More »
Power Modules provide integrated dual AC and DC input.
C0818D packet-switched backplane enclosure and C0814D high-density enclosure accept hot-swap input power control modules. Modules plug into computer backplane from rear of computer chassis. Both AC and DC modules provide 800 W of cross-feed redundant input power required by system power supplies. Power supplies will, in turn provide 600 W of N+1 redundant system power. Units are IEEE 1101.10/11...
Read More »
Advantages of VPSA Technology for Your Application
VPSA technology uses different equipment than PSA and requires significantly less energy, resulting in an average cost savings of one-third to one-half in comparison to PSA systems.
Read More »
Electrical Cabinet meets Zone 4 shock and vibration standards.
SeismicReady heavy duty cabinet utilizes 7-gage steel fabricated and welded base with 11-gage rails. It features double wall extrusion with internal corner keys crimped and welded in place, welded corner sockets and corner members, heavy duty front to back stiffeners, and cross bracing for seismic survival. Unit is available with fans, blowers, and A/C units for heat removal. Cable management...
Read More »
Cabinet Racks adhere to NEMA 12 requirements.
Cabinets protect electronic equipment from dirt, dust, and dampness. Equipped with oil resistant gaskets, they are offered in two different sizes: 19.00 x 70.00 x 29.25 in. (W x H x D) and 19.00 x 78.75 x 29.25 in. (W x H x D). Both rack sizes come with frames, locking front and rear doors, externally removable side panels, and four adjustable panel mounting rails. Gasketed panels cover cable...
Read More »
Enclosure converts from rack mount to desktop.
Enclosure, made of ABS plastic, with UL94-HB flammability rating, provides electrical insulation. Three sizes handle most applications: PRM-14460 is 1.75 in. high (1-U), PRM-14462 is 3.50 in. high (2-U), and PRM-14464 is 5.25 in. high (3-U). Width is 19 in., including mounting brackets, and depth is 8 in. Internal electronics mount in either horizontal position or on front and/or rear panels....
Read More »
Enclosure supports 21-slot backplanes.
RME21 Pac-2000(TM) CoolSlot(TM) is available with 21-slot CompactPCIÃ-® PICMG 2.16, VME64x, or VME backplanes. Air deflecting card guides eliminate cooling dead spots on boards and provide uniform airflow throughout system. Air is provided by fan tray with cooling capacity of 85 W/slot. Power is provided by 1000 or 1600 W embedded power supply, or enclosure can be wired for three 600 W ac or...
Read More »Rackmount Enclosures provides 2 slots in 1U chassis.
PRME Series horizontal rackmount enclosures are designed to cool cards dissipating 55 W per slot. CoolSlot(TM) card guides eliminate cooling dead spots on boards and provide uniform airflow throughout system. Thermal CFD simulation demonstrates 400 LFM per front slot and 100 LFM per rear transition module slot. Two-slot CompactPCI(R) or VME backplanes are available. Power is provided by embedded...
Read More »Entrance Splice Cabinets resist water and dust.
Used for splicing optical fiber cables at building entrances, cabinets can be mounted on wall in cable vault or in cable entrance facility to provide transition splicing between outside plant cables and building cables. Splices are stored in modular slide-out splice trays that accommodate up to 864 individual splices or 2,592 mass fusion splices. Any combination of individual fusion trays and...
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »
