Drive Enclosure offers multi-interface compatibility.
Saturn Hard Drive Enclosure enables any SATA hard drive to connect to computer via USB, Firewire, CardBus/PCMCIA, SATA, or IDE interface. Storage solution also allows SATA or IDE hard drive to be used as removable drive via same drive bay in Mobile Rack application. Enclosure components can be mixed and matched to meet storage application requirements. Kit also enables users to read/write to hard...
Read More »
Control Enclosures require minimal installation time.
Definite-purpose control enclosures feature mounting grid design that acts like pegboard for mounting enclosures on machinery, and eliminates drilling requirements. General-purpose units are offered in 11 sizes from 5.12 x 3.15 x 3.35 in. to 22 x 15 x 7 in., while junction box enclosures are available in 6 sizes from 3.54 x 2.76 x 2.03 in. to 8 x 8 x 5 in. Push-button units house 30.5 mm push...
Read More »
Enterprise-Class Enclosure measures 11U high.
Equipped with 2,000 W power supply, enclosure uses 3 fans and 3 blowers to produce airflow sufficient enough to cool over 90 W of available power per slot. Unit supports combinations of 21-slot wide segmented, monolithic, or custom backplane designs with CompactPCIÃ-®, CompactPCI Express, VME, or VXI busses. Optional Internet-based system monitor and alarm board, coupled with Java-based...
Read More »Rack Mount Tape Enclosure increases tape drive rack density.
IBM 4U Rackmount SCSI Tape Enclosure enables users to independently attach external tape drives to xSeriesÃ-® servers that do not have internal drive bays. Featuring external SCSI cable to aid in setup, product facilitates installation and removal of tape drives. It supports 4 full-high or 6 half-high drives, which can be intermixed as needed. Modular unit can be shared by up to 6 servers and...
Read More »
Understanding Water Hammer
DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.
Read More »
Cabinets suit electrical wiring/electronics applications.
Available in 6 sizes from 23 x 14 in. to 48 x 20 in., wall-mount swing-frame cabinets accept 19 in. sub-racks and fittings as well as electrical components. Locks to front and rear doors permit entire frame to swing clear of wall to facilitate installation and maintenance for manufacturing, instrumentation, or automation applications. Customization options include choice of door styles, internal...
Read More »
Connector System features no-thread design.
Ultra-Lock Connector System contains distribution boxes and cord sets based on push-lock principal. Users push down to connect, and pull up to disconnect. Equipped with IP68-rated radial seal and interlock design, system features identical contact configuration to M12 industry standard connectors. Once engaged, it provides fail-safe connectivity, even under stresses of cable flexing, mechanical...
Read More »Electrical Enclosures feature thermal insulation panels.
Series 5412 ESTH thermally insulated electrical enclosures are available in sizes ranging from 12 x 12 x 6 in. to 72 x 30 x 24 in. NEMA 4/12 enclosures feature poured-in-place gaskets, quarter-turn locks, and incorporated drip shields. Held in place by steel brackets, Ã-¾ in. aluminum foil faced insulation panels are installed on all faces, including door. Rigid polyisocyanurate foam...
Read More »
Tower Enclosures offer up to 800 W of power.
Portable Cool-H 9-slot Towers feature average airflow of 17.9 cfm per slot, sufficient to cool up to 100 W/slot. Eight-slot VITA 1.7 VME64x or CompactPCI switch fabric backplane is available. Fully compatible with IEEE 1101.10/11 packaging standards, units include provisions for 80 mm rear plug-in modules and transition modules. Front and rear ground clips provide grounding for plug-in modules,...
Read More »
Equipment Cabinets are EIA-310 compliant.
Suited for all 19 in. panel-width equipment, ValuRack Cabinets feature one pair of integral full-height panel mounting rails in front, recessed 1.00 in., with EIA universal spaced mounting holes. Available in panel heights of 61.25, 70.00, and 78.75 in., units are 22 in. wide with 26 in. outside depth and 24 in. clear inside depth. Cabinets support up to 700 lb of equipment in standard...
Read More »
Enclosure suits small HMI operator panels.
Optipanel features extruded aluminum housing and front frame, die-cast zinc protective corners, and flexible gasketing trim. Panel housing is available in 3 depths: 50, 100, and 150 mm. Retaining clamps provide flexibility to install variety of standard operator interface display panels. Installation depths for keyboard housing are 50 or 100 mm. Panel can be customized with operator panel...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
