TURCK'S BL Compact Family Collects Analog and Digital Signals at the Source
Minneapolis, Minn. - November 24, 2009 - TURCK's BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, on-the-machine device over...
Read More »Brooks Instrument Expands the Digital Communications Capabilities on the 4800 Series Mass Flow Controllers/Meters
Hatfield, PA (October 21, 2009) - Brooks Instrument, a world-leading provider of advanced flow measurement, control, and level solutions, is pleased to announce new digital communications capabilities on the 4800 Series mass flow meters and mass flow controllers. In addition to the analog and RS232 communications, customers can now choose Profibus or RS485 which is delivered in a small field...
Read More »
Rexroth Adds Sercos III and Ethernet/IP to Pneumatic Valve Fieldbus Protocol Support
Rexroth has expanded the offering of B-Design fieldbus components to include support for Sercos III and Ethernet/IP for valve systems Series HF03-LG, HF04 and CD01/02-PI. (Lexington, KY - www.boschrexroth-us.com/brp) Rexroth announces the expansion of B-Design fieldbus components to include support for Sercos III and Ethernet/IP for valve manifold systems Series HF03-LG, HF04, and CD01/02-PI. The...
Read More »
Profibus System offers data rates up to 12 Mbps.
Featuring EZ-ZONE-® PM and EZ-ZONE RM integrated temperature controllers, PROFIBUS DP facilitates plant design and eliminates hard wiring. System features status LEDs, cycle read/writes up to 135 data points, and acyclic read/write capabilities. With generic station description file editor, users can create customized data exchange packets. Additional features include support for DP-Version 0...
Read More »
The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors
This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.
Read More »
Network Cable Connectors accept wire sizes up to 14 AWG.
Designed for a variety of Fieldbus and Ethernet network applications, 7/8 in. cable connectors with 2.5 mm terminal cross-section capacity of Series 820 field-attachable connectors are offered with 5 gold-plated contacts in male and female versions with straight and right-angle options. Cables up to 14 mm in dia can be connected to straight versions and up to 12 mm can be connected to right-angle...
Read More »Fieldbus Technology 2.0 for Hazardous Areas
HOUSTON - R. STAHL's established ISbus series, which has been providing a basic range of explosion-protected fieldbus technology until now, will be expanded by various innovative components and systems in 2009. These additions ensure greater flexibility, save costs and create new options, taking the ISbus program to a new level. A simple fieldbus power supply, fieldbus barriers for 4...
Read More »DTM for IS1 Field Devices Now Certified
HOUSTON - R. STAHL has been providing a Device Type Manager (DTM) for the IS1 remote I/O system for some time. This DTM enables users to fully con-figure, set parameters and administration of all I/O modules, CPM unit (gateway) and connected HART field devices via Profibus DP through an FDT-capable program (FDT frame application). The DTM has been tested by means of the dtmINSPECTOR, this is the...
Read More »MPHusky Cable Bus Achieves Superior Reliability to Bus Duct, Conduit & Wire and Other Power Distribution Systems
MPHusky engineers and manufactures Cable Bus Duct Systems that utilize continuous runs of cable from termination to termination, eliminating the need for potentially faulty splices found in non-segregated phase bus duct systems. Since MPHusky Cable Bus utilizes highly reliable outdoor rated cables, moisture and weather do not damage the system. In fact, the system is designed to allow air,...
Read More »MPHusky Cable Bus Saves Money Versus Non-Seg Bus Duct, Conduit & Wire, and Cable in Tray
MPHusky Cable Bus Power Distribution Systems are engineered and manufactured for superior reliability as well as to utilize less conductive material, providing significant savings versus non-segregated phase bus duct, conduit and wire, and other electrical feeders. And as copper prices have continued to remain at historically high levels, the savings clients realize are even greater and more...
Read More »
DeviceNet(TM) Gateway expands fieldbus I/O.
Using I/Oassistant software for configuration, parameter setup, documentation, commissioning, and diagnostics, BL20 DeviceNet Gateway accepts up to 32 I/O modules, resulting in system that can handle up to 512 digital I/O points or 128 analog I/O points. Gateway is compatible with TURCK's BL20 slices, including motor starter modules with SWIRE communication technology. SWIRE consists of single...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
