PROFINET I/O Fieldbus Couplers has built-in Ethernet switch.
Operating as I/O devices in PROFINET network, 750 Series identify connected I/O modules and create local process images for one or more controllers. Transmission cycle times are 1 msec (min). While 750-375 Standard- supports up to 250 I/O modules, 2- I/O controllers, and one I/O supervisor and- supplies 1,700 mA of internal power, 750-377 ECOnomy supports up to 64 I/O modules, one I/O...
Read More »Xilinx Highlights All Programmable SoCs and FPGAs for Smarter Systems Design at NIWeek 2013
SAN JOSE, Calif.- – Xilinx, Inc. (NASDAQ: XLNX), gold level sponsor of NIWeek 2013 (August 5-8, 2013, Austin Convention Center), today announced it will highlight the implementation of its All Programmable SoCs and FPGAs in National Instruments (NI) reconfigurable I/O (RIO) hardware at this year's conference.- NIWeek attendees will have the opportunity to learn how Xilinx and NI are...
Read More »Distributed I/O System supports multiple network interface types.
Reducing wiring and network complexity, PACSystems-® RSTi- is available with CANopen and CC-Link bus interfaces. Both networks enable I/O and range of control devices to connect on same network. Based on global standards, system promotes open, consistent communication link between field I/O and controller. There are 80+ different module types- available for discrete, process, motion, and...
Read More »
Wireless CAN-bus interfaces with MOBEUS EH braking systems.
Offering alternative to standard wired USB/CAN adaptors, MICO Electrohydraulic (EH) wireless CAN-bus interfaces with MOBEUS ABS/TC/ESC ECU (Electronic Control Unit) utilizing- CAN-Bluetooth connection to MOBEUS Service- and Diagnostic Tool LINC. Solution is designed for use with MICO EH braking systems in Off-Highway vehicles and is fully compatible with SAE J1939 CAN Communication standard....
Read More »
How to Choose the Right Adhesive Tape for Your Application
With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.
Read More »Fieldbus Coupler is compatible with 31.25 µs Sercos cycles.
IP67 SPEEDWAY 767-1311 links fieldbus level to Sercos V1.2 real-time Ethernet fieldbus system. Supporting all Sercos cycle times, coupler integrates into- Sercos system via Standardized Sercos Profiles and Device Description (SDDML). Machine-mount- unit offers 8 high-speed digital inputs to capture binary signals from switches/sensors with 10 -µs scanning cycle. Product connects to range of...
Read More »
Communication Module adds Profibus connection to PLC.
Adding 9-pin Sub-D socket connector to versions of S7-1500 controller which have no integrated interface, Simatic CM 1542-5 allows communication with lower-level Profibus devices in bandwidths from 9.6 Kbps to 12 Mbps. Module can also be used to implement separate Profibus lines to control field devices via Profibus segments. Assuming all communication tasks in process, Simatic CM 1542-5...
Read More »Fieldbus Linking Devices facilitate plantwide process control.
Expanding PlantPAx communication capabilities, Allen-Bradley 1788-EN2FFR and 1788-CN2FFR provide direct link from EtherNet/IP or ControlNet networks to FOUNDATION Fieldbus H1 device-level network. Both support up to 16 field devices on single H1 segment and feature multiple redundancy configurations, including redundant linking devices, H1 media, ControlNet media, and EtherNet/IP Device-Level...
Read More »
Megablock Wiring Hubs are intended for fieldbus applications.
F300 Series is designed for general-purpose, Zone 2 and Division 2 hazardous area applications where high-energy trunk can be powered by fieldbus power supplies and ability to conduct live maintenance is desirable. Pluggable Trunk I/O connector allows replacement without breaking trunk connection to other devices on fieldbus segment, and F97 terminator may be mounted in Trunk out connection to...
Read More »
I/O System fully supports Ethernet/TCP Fieldbus.
SPEEDWAY 767-I/O-SYSTEM processes 1,000 instructions within 150 -µsec. Available in DI, DO, or DIO versions, 8xM12 Modules provide 1:1 connections for up to 8 high-speed M12 sensors/actuators, and support asynchronous/synchronous diagnostics and extensive detail of front-end errors. DIO modules are set channel-by-channel for filter, inversion, substitute value strategy, manual mode, and counter....
Read More »
Beamex Introduces a New Measurement Industry Benchmark - An Advanced Field Calibrator and Communicator
The processing industry is going through significant changes and is affected by several industry trends. Mr. Raimo Ahola, CEO of Beamex Group says, we have conducted extensive market- and customer-related studies worldwide during the past few years by interviewing thousands of instrumentation and calibration professionals, and based on those studies, and also on direct feedback we have received...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
