New Distribution Systems Products

Rackmount PDUs support mission-critical servers.

Comprised of 200+ products that can be configured to power standard and blade servers, MT3 Series provides total power from 5,000-8,600 W as well as optional metering or remote monitoring (RS232) capability. Products employ rPower(TM), which enables users to read hi-res color display from up to 12 ft away or through enclosure door perforation. Additionally, rPower offers installation flexibility...

Power Distribution Units offer full EMI and surge protection.

Housed in low profile, 1U package, Series PCL800/801 provides 8 rear-mounted NEMA power sockets and includes full EMI noise filtering and line surge protection to UL330V. All models include all-steel construction, lighted power on/off switch, 6 ft ac input power cord, and magnetic circuit breaker to eliminate nuisance line resets caused by momentary overload conditions. Devices are suited for...

Vertical Power Distribution Units include current meter.

Measuring 70 in. tall and 2 in. deep, 3-phase Series VPC2864 provides 30 receptacles and can be configured with 15 A 3-prong receptacles or 20 A T-blade receptacles. Units include current metering on each phase to properly balance and load system. Three-phase power input allows 48 A continuous power at 120 V single phase. Housed in steel enclosure with black powder coat finish, PDUs are...

Half-Rack PDUs support 3-phase power.

Designed for rack-mount applications with 3-phase power in and single-phase power out, Monitored PDUs fit 22-47U racks and feature 12 C-19 outlets with color-coded load identification for all receptacles, display, and circuit breakers. Front panel has 2-digit, 7-segment LED digital display, which shows current in each circuit breaker, scroll button to scroll through values, and 6 LEDs, which...

Why Choose a Concept-to-Completion Sheet Metal Fabricator

Concept-to-Completion provides you with the services and guidance you need to get your metal fabrication project done better, faster, and more cost effectively, all in one place.

Power Distribution Modules help avoid system downtime.

HPD Series converts one low-voltage power supply input into 4 or 8 individually fused or PTC protected outputs. Devices connected to modules work off separate circuits. Fused models HPD4 and HPD8 feature protected outputs that have individual fuses rated at 3.0 A each and main fuse rated at 5.0 A. Modules that are PTC protected - HPD4CB and HPD8CB - feature protected outputs with individual...

Power Supply Tracker suits distributed POL applications.

Single Power Supply Tracking Controller, Model LTC2927, facilitates tracking and sequencing of complex distributed power architectures. Housed in 8-lead SOT-23 or 3 x 2 mm DFN package, device can be placed at point of load. By minimizing trace length to sensitive feedback node of dc/dc converter, Model LTC2927 minimizes losses caused by voltage drops and overcomes noise sensitivity and EMI...

Rackmount PDUs feature amp meter and remote switching.

Switched Power Distribution Units incorporate amp metering that enables network administrators to turn 16 outlets on and off, reboot individual equipment, and monitor current and voltage, all from remote location. Administrators can assign over 100 unique users with full or individually assigned access for configuration and control of PDUs through Web browser, command line interface, SNMP, or...

Terminal Blocks facilitate power distribution.

Series POLM consists of single or multiple busbars with wire screw connections. Current handling capacity ranges from 63-100, 125, and 160 A. Each busbar accepts 7-15 wires, depending on model. Made from UL 94V0 polycarbonate, fully insulated housing covers can be removed for access to wiring. Modules can be mounted onto standard DIN rails or directly onto panel. Individual busbars can be removed...

Sensor Distribution Boxes control motors and drive systems.

Used with any sensor equipped with M12 connector, distribution boxes mounted directly on equipment and provide IP65/67 protection. They are available in 4- or 8-positions, PVC or PUR, and with or without LED indication. Double assigned slots are available as option for wiring. Used in tight spaces and harsh environments, products are offered with 5 m cable or spring clamp terminations. Compact...

Distribution System delivers power and data.

Designed for raised floor commercial applications, CONNEXION Zone Distribution System routes power and data wherever needed to facilitate relocations and future upgrades. Factory-assembled 20 A modular system brings power and data services to point of use with zone distribution box that can expand from 4-16 circuits to meet changing infrastructure requirements. Installed by 3-person crew in one...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.