DC Motors

Brushless Servo Motor has 16 mm through bore in shaft.
DC Motors

Brushless Servo Motor has 16 mm through bore in shaft.

HO Series combines NEMA 23 mounting with through hole, encoder, and slotless motor construction, eliminating unwanted magnetic disturbances. Motors come with internally mounted glass encoder grating and encoder read head. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability at 0.3 microradians, and torque curves have less than 1% harmonic distortion. Wires,...

Read More »
Brushed DC Servo Motors are suited for medical devices.
DC Motors

Brushed DC Servo Motors are suited for medical devices.

Brushed-type, permanent magnet, dc servo motors are offered in 60, 90, and 110 mm dia with respective NEMA frame sizes of 23, 34, and 42. Winding voltages of 12, 24, 36, and 48 V ensure compatibility with industry-standard motor drives available to satisfy torque requirements from 40 to 2,100 oz-in. Applications include factory automation, packaging machines, robotics, coil winders, converting...

Read More »
Brushless Motor suits closed-loop positioning applications.
DC Motors

Brushless Motor suits closed-loop positioning applications.

Equipped with 0.75 in. OD X 3.4 in. long stainless steel housing, dc motor is capable of delivering peak torque of 10 oz-in. with 3.6 A @ 7,000 rpm. Mechanical time constant is 1.43 msec, and electrical time constant is 0.15 msec. Rotor inertia of 2.8 X 10-5 oz-in.-secÂ-² facilitates acceleration and deceleration. Motor also has 96-line, 2-channel quadrature encoder for positioning accuracy....

Read More »
DC Motors

DC Gear Motor accepts any 90 Vdc power source.

Equipped with 180:1 gear ratio, Model MMP.PDSF80-90V.180 is rated for 70 lb-in. continuous torque at 0.9 A of current. Unit measures 2.8 in. dia x 6 in. long with 80 mm square gearbox. Measuring 10 mm dia, output shaft is provided with square shaft key and keyway. Mounting is accomplished with 4 in. face mount threaded screws, 68 mm apart. Options include integral optical encoders, failsafe...

Read More »
DC Motors

Reversible DC Gear Motor offers output speed of 160 rpm.

Accepting any 12 Vdc power source including batteries, Model MMP.PDSF80-12V.018.1 measures 2.8 in. diameter x 5.6 in. long with 80 mm square gearbox. Output shaft is 10 mm diameter, and is provided with square shaft key and keyway. Equipped with 18:1 gear ratio, motor is rated for 26 lb-in. of continuous torque at 3.9 A of current, and is capable of 70 lb-in. of peak torque. Mounting is...

Read More »
DC Motors

DC Servo Motor includes integral analog tachometer.

Measuring 2.14 in. dia x 5.96 in. long with 0.375 in. dia stainless steel output shaft, Model MMP-C21.175E-24V.T-03 requires 3.4 A at 24 Vdc to generate full power. Integral tachometer provides positive, linear feedback signal for closed-loop servo applications at rate of 3 Vdc per 1,000 rpm of rotation. Delivering 80 W of continous output power at 5,000 rpm, motor is rated for 30 oz-in. of...

Read More »
Brushless Motor integrates electronic commutator.
DC Motors

Brushless Motor integrates electronic commutator.

CMG Silicon Series operates like conventional dc motor and can be operated directly from battery or in conjunction with dc controller. It weighs 14 lb and measures 7 7/8 in. in diameter and 5 in. in length. Motor accommodates both IEC80 and 4F17 hydraulic pump mounting flange standards. Applications include hydraulic power units, robotics, marine propulsion, integrated starter/alternators,...

Read More »
Pole-Wound Servomotors offer torques from 0.18-53 Nm.
DC Motors

Pole-Wound Servomotors offer torques from 0.18-53 Nm.

Series AM3000 Synchronous Servomotors feature sealed windings and are available with 7 flange sizes. Housings, made from single piece of metal, produce no negative impact on stability through material transitions that increase thermal resistance. Rotatable plug connectors for power and feedback facilitate machine wiring. Pressed bearings prevent axial motion of shaft. Tight tolerances result in...

Read More »
DC Motors

Brushless DC Motor offers high torque in limited space.

Featuring 0.51 in. profile and 3.77 in. diameter, 12 V Model 000-0317 is capable of delivering in excess of 75 oz-in. of torque. Large inner-rotor dimension accommodates variety of mounting configurations including light beam passage or wire/cable channeling. Stator is molded, high-temperature plastic with 4 screw-mount tabs. Commutation feedback utilizes Hall-Effect sensors, although various...

Read More »
DC Powered Gear Motor uses brushless technology.
DC Motors

DC Powered Gear Motor uses brushless technology.

GF-bldc gear motor incorporates heavy-duty GF gearbox combined with 2.25 in. double ball bearing brushless motor. It provides up to 300 lb-in. of output torque over variable speed range of 1-30 rpm. Optional features include customized output shafts, integral controls, programmable dynamic braking for back drive resistance, various mounting options, and custom speed profiles.

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers