DC Motors

Brushless DC Motors offer CANopen networking capabilities.
DC Motors

Brushless DC Motors offer CANopen networking capabilities.

With CANopen interface, up to 127 Brushless DC Motors can be connected with single, shielded 2-wire cable. Data may be transmitted at speeds up to 125 kBd at distances over 550 yards. At lower baud rates, transmission distance can exceed 3 miles, making communications flexible to virtually any location. Able to withstand up to 80 Vdc regenerative energy, CANopen-enabled motors utilize 2 safety...

Read More »
New VDO HVAC Motors Line Expanded with Exclusive, First-to-Market Applications
DC Motors

New VDO HVAC Motors Line Expanded with Exclusive, First-to-Market Applications

• Coverage includes Toyota Sienna/ Sequoia, Cadillac ATS/CTS, Nissan Versa and more Allentown, PAÂ- — Continental Commercial Vehicles & Aftermarket, a leading and trusted aftermarket supplier of OE-engineered aftermarket parts for HVAC and engine cooling, door systems, brake systems, tire pressure monitoring systems, engine management, fuel systems and instrumentation, has substantially...

Read More »
Brushless DC Motors provide max speed of 9,000 rpm.
DC Motors

Brushless DC Motors provide max speed of 9,000 rpm.

Used with DC bus voltages up to 96 V, EC042B Series offers 3 motor lengths with 11–31 Ncm continuous torque and 35–99 Ncm peak torque. Motors utilize high-energy, 4-pole rotor with rare earth magnets for high torque to inertia ratio. Stator assembly is designed with low-loss materials for high-speed applications, while motor shaft is supported by shielded ball bearings that are preloaded for...

Read More »
Brushless DC Motor targets medical applications.
DC Motors

Brushless DC Motor targets medical applications.

Measuring 4 mm in diameter, Model EC 4 comes in 2 different lengths, with power ratings of 0.5 and 1 W. Brushless micro drive is equipped with ironless winding and is certified in accordance with ISO 13485. Combined with GP 4 planetary gearhead, EC 4 is suited for use in micropumps, analytic and diagnostic devices, and laboratory robots. Motor can adjust lenses, dispense fluids, or position...

Read More »
Rectangular Brush DC Motors suit portable equipment, power tools.
DC Motors

Rectangular Brush DC Motors suit portable equipment, power tools.

Used with DC bus voltages up to 48 V, DC032A Series has 25 x 32 mm motor body cross section, is available in 3 lengths with continuous torque from 0.027–0.034 Nm, and max speed of 6,500 rpm. There are 8 standard winding variations available, as well as custom options, to suit diverse projects, and construction features high-energy, 4-pole stator with rare earth magnets. While 13-slot...

Read More »
Brushless DC Motor/Driver Packages have built-in controller.
DC Motors

Brushless DC Motor/Driver Packages have built-in controller.

Available from 30–400 W with 16 speed settings, BXII Series provides speed control up to 4,000 rpm with speed regulation to +0.05%. Units are available in round shaft, parallel shaft gearheads, or hollow shaft flat gearhead with electromagnetic brake options. Parallel geared types produce up to 610 lb-in. of torque, while hollow shaft flat geared types produce up to 970 lb-in. Digital setting...

Read More »
IEC Electric Motors come in safe and hazardous area models.
DC Motors

IEC Electric Motors come in safe and hazardous area models.

Designed for safe area operation, Process Performance Motors are available in aluminum or cast iron designs in frame sizes from 63–280 with ratings from .16–125 hp. Flameproof and Non-Sparking Motors are certified for ATEX and IECEx as standard in cast iron frame with IP55 ratingÂ- for increased safety. Available from .75–60 hp, Flameproof models are designed for Zone 1 locations,...

Read More »
Rotary Brushless DC Motor provides over 90% efficiency.
DC Motors

Rotary Brushless DC Motor provides over 90% efficiency.

With nominal voltages down to 24 Vdc, Model BG 95 provides 1,100 W of output power continuously and is suitable for autonomous vehicles and other similar battery-powered applications. When operating at 3,650 rpm, continuous torque is 2.9 Nm and max torque is 10.4 Nm. Also, with optional integrated encoder system, motor offers higher resolution positioning and speed control using either 4,096 ppr...

Read More »
DC Motors

Victory Racing Chooses Parker's GVM Electric Motor to Compete for Prestigious Isle of Man Trophy

Rohnert Park, CAÂ- – Parker Hannifin, the world’s leading diversified manufacturer of motion and control technologies, announced today that it is sponsoring Victory Motorcycles as they compete in the 2015 Isle of Man TT Zero Challenge on Wednesday, June 10. In addition to being a marquis sponsor, Parker’s race-proven, high-performance Global Vehicle Motor (GVM) PMAC electric motors...

Read More »
DC Brushless Motors come in high torque version.
DC Motors

DC Brushless Motors come in high torque version.

Available with diameter of 40 mm, EC-i 40 Series comprises 3 models, delivering up to 234 mNm of nominal torque. Iron-core internal rotor drives are suited for applications in robotics, prosthetics, and industrial automation. Compact design offers solution in applications with extreme space constraints. When needed, EC-i 40 High Torque motors can be combined with maxon gearheads, servo...

Read More »

All Topics