Brushless AC Motor features integrated controller.
Accepting 24-80 Vdc input, Sevcon HypAC(TM) provides output from 1-5 kW. Unit operates at fixed speeds to assure consistent performance across varying operating voltages, and/or in compensation mode regulating speed relative to applied load. Offering alternative to dc systems, IP54-sealed permanent magnet motor provides soft-starting and accepts standard ANSI pump shaft interfaces. Applications...
Read More »
DC Gear Motor delivers 50 lb-in. torque at 89 rpm.
Weighing 3.5 lb, model MMP C21-125E-24V GPk52-046LS BR-005n EU-250i measures 2.14 in. in diameter x 9.35 in. long and has keyed output shaft of 0.500 in. dia x 1.5 in. long. It features Power ON brake, which engages only in presence of 24 V power, and 250 ppr dual-channel encoder, with index. Requiring 3.6 A at 24 Vdc to generate full load torque, reversible motor is rated IP54 for operation in...
Read More »Internal Rotor Motors fit space-restricted applications.
Available in 40 mm diameter and 2 lengths of 26 and 36 mm, EC-i Motors use high-powered permanent magnets for speed stability under load. Brushless, electronically commutated units feature minimal detent and are suited for applications that require maximum drive in minimum space such as robotics, industrial automation, and security technology.
Read More »SMD Micro Motors suit small device vibration applications.
Featuring 3.4 mm profile, BSY Series DC Motors are 11 mm long with typical speed of 14,000 rpm and mechanical noise of 45 dB max. Standard operating voltage is 2.7 Vdc and load current is approximately 65 mA. Intended for applications requiring small footprint on surface mount circuit board, units are suited for mobile phones and consumer medical devices as well as medical and other applications.
Read More »
5 Key Questions to Ask Before Choosing a Custom Welding Company
This white paper provides an in-depth overview into choosing a custom welding company by highlighting five questions you should ask a potential welding partner to determine whether they are right for your custom welding project.
Read More »
Brushless Motors suit respiratory support equipment.
Weighing 94 g and providing 50 W of power at up to 73,000 rpm, 22 mm Brushless Motors operate at 25-
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM ST-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of -½,1,1-½, and 2 in.,...
Read More »Custom Submersible Motor Gearbox Assembly from Empire Magnetics Make Waves in O by Cirque du Soleil
ROHNERT PARK, CA - Empire Magnetics, a leading supplier of specialty motor products, motion control systems and support services, is often called on to develop custom motion control solutions for unique applications and environments where standard motion control components are simply unsuitable. One of Empire's custom motor gearbox assemblies has even made its way into show business as an...
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN-® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with 6-slot...
Read More »
DC Micromotors include graphite commutation.
Featuring external motor diameter of 22 mm and length of 32 mm, Series M2232U provides stall torque of 25.62 mNm and speeds up to 10,000 rpm. Low-cog rotation is achieved through skewed laminations and tapered permanent magnet system. Available with 6, 12, and 24 V windings, Series M2232U GS has cantilevered brush system, while Series M2232U CS has cartridge brush system. Plastic and metal...
Read More »
Pittman Brushless DC 'Micromotors' ...
A new family of PITTMAN® brushless DC servo motors incorporates patented coil-winding geometry in a slotless motor design to deliver more power using less energy. These micromotors can perform ideally in medical instruments, dental drills, hand power tools, home appliances, computer hardware, marine pumps, and automotive-related devices, among other applications. All models in the new product...
Read More »
SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents
Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.
Read More »
