Gearless Motors deliver more than 100 lb-in. torque.
Featuring enclosed construction, e-TORQ Direct Drive Brushless DC Servo Motors are available in widths under 2 in. and diameters from 7-14 in. and larger. Compact products employ electromagnetic design with ironless stator. Lack of iron saturation provides maximum torque linearity, meaning that torque is consistent across speed range without cogging or velocity fluctuations. Motors are offered...
Read More »
Synchronous Motors offer torque limiting operation.
Suited for applications requiring constant closing torque, RG Series utilizes magnetic hysteresis coupling between rotor and output shaft to produce constant torque when stalled. They can accelerate mass moments of inertia asynchronously, and, once synchronous speed is reached, motors maintain constant speed. Available in size 35, 50 and 64 with operation at 50 and 60 Hz, IP 40 rated motors offer...
Read More »
Brushless Servo Motor has 16 mm through bore in shaft.
HO Series combines NEMA 23 mounting with through hole, encoder, and slotless motor construction, eliminating unwanted magnetic disturbances. Motors come with internally mounted glass encoder grating and encoder read head. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability at 0.3 microradians, and torque curves have less than 1% harmonic distortion. Wires,...
Read More »
Brushed DC Servo Motors are suited for medical devices.
Brushed-type, permanent magnet, dc servo motors are offered in 60, 90, and 110 mm dia with respective NEMA frame sizes of 23, 34, and 42. Winding voltages of 12, 24, 36, and 48 V ensure compatibility with industry-standard motor drives available to satisfy torque requirements from 40 to 2,100 oz-in. Applications include factory automation, packaging machines, robotics, coil winders, converting...
Read More »
Troubleshooting Guide: What Your Cranes Wish You Knew
Your guide to crane troubleshooting
Read More »
Brushless Motor suits closed-loop positioning applications.
Equipped with 0.75 in. OD X 3.4 in. long stainless steel housing, dc motor is capable of delivering peak torque of 10 oz-in. with 3.6 A @ 7,000 rpm. Mechanical time constant is 1.43 msec, and electrical time constant is 0.15 msec. Rotor inertia of 2.8 X 10-5 oz-in.-secÃ-² facilitates acceleration and deceleration. Motor also has 96-line, 2-channel quadrature encoder for positioning accuracy....
Read More »DC Gear Motor accepts any 90 Vdc power source.
Equipped with 180:1 gear ratio, Model MMP.PDSF80-90V.180 is rated for 70 lb-in. continuous torque at 0.9 A of current. Unit measures 2.8 in. dia x 6 in. long with 80 mm square gearbox. Measuring 10 mm dia, output shaft is provided with square shaft key and keyway. Mounting is accomplished with 4 in. face mount threaded screws, 68 mm apart. Options include integral optical encoders, failsafe...
Read More »Reversible DC Gear Motor offers output speed of 160 rpm.
Accepting any 12 Vdc power source including batteries, Model MMP.PDSF80-12V.018.1 measures 2.8 in. diameter x 5.6 in. long with 80 mm square gearbox. Output shaft is 10 mm diameter, and is provided with square shaft key and keyway. Equipped with 18:1 gear ratio, motor is rated for 26 lb-in. of continuous torque at 3.9 A of current, and is capable of 70 lb-in. of peak torque. Mounting is...
Read More »DC Servo Motor includes integral analog tachometer.
Measuring 2.14 in. dia x 5.96 in. long with 0.375 in. dia stainless steel output shaft, Model MMP-C21.175E-24V.T-03 requires 3.4 A at 24 Vdc to generate full power. Integral tachometer provides positive, linear feedback signal for closed-loop servo applications at rate of 3 Vdc per 1,000 rpm of rotation. Delivering 80 W of continous output power at 5,000 rpm, motor is rated for 30 oz-in. of...
Read More »
Brushless Motor integrates electronic commutator.
CMG Silicon Series operates like conventional dc motor and can be operated directly from battery or in conjunction with dc controller. It weighs 14 lb and measures 7 7/8 in. in diameter and 5 in. in length. Motor accommodates both IEC80 and 4F17 hydraulic pump mounting flange standards. Applications include hydraulic power units, robotics, marine propulsion, integrated starter/alternators,...
Read More »
Pole-Wound Servomotors offer torques from 0.18-53 Nm.
Series AM3000 Synchronous Servomotors feature sealed windings and are available with 7 flange sizes. Housings, made from single piece of metal, produce no negative impact on stability through material transitions that increase thermal resistance. Rotatable plug connectors for power and feedback facilitate machine wiring. Pressed bearings prevent axial motion of shaft. Tight tolerances result in...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
