DC Motors

Powerful But Small 10mm DC Micromotor
DC Motors

Powerful But Small 10mm DC Micromotor

Clearwater, Florida - MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024...S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the System FAULHABER ironless rotor and Neodymium rare earth magnets to achieve a stall...

Read More »
DC Motors

Advanced Brushless Motor and Elastomers Enhance Miniature Diaphragm Pump Capabilities

Miniature diaphragm pumps, vacuum pumps and micro air compressors have had their performance and operational life limited by standard elastomer mechanical properties and DC Brushless motor designs. As fluidic system developers have demanded smaller component envelopes, miniature air and liquid diaphragm pumps have incurred increased challenges to increase performance and life requirements....

Read More »
DC Motors

Brushless DC Servomotor suits limited-space applications.

Measuring 1.3 in. dia, ELCOM STÂ-® Series 1300 includes 1.5, 2, and 2.5 in. long models that achieve 12.6-54.3 oz-in. peak torque and 5-9 oz-in. continuous torque. Rotor construction enables rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback. Housed in aluminum, series features 3-phase stator with 6-slot silicon steel laminations; 4-pole rotor with neodymium...

Read More »
Micro Motor features ceramic air bearing design.
DC Motors

Micro Motor features ceramic air bearing design.

Sensorless PM Series brushless dc micro motor has 20 mm dia sleeve, 8.4 mm high x 25 mm dia rotor, and total height of 25 mm. With ceramic air bearing design that uses air as lubricant, motor features operating voltage of 12 Vdc, 70 mA load current, speed of 10,000 rpm (typ), and operating temperature range of 0-90Â-

Read More »
DC Motors

Brushless Motors suit aerospace applications.

Weighing 10.5 lb, EA Series brushless motors produce 11 kW at 6,500 rpm and operate at 12-72 Vdc up to 450 A. They feature custom housing and end bells, along with lightened rotor and titanium shaft. Developed to enable vertical take off and landing operations in unmanned aerial vehicles, motors are also suited for defense and aerospace applications such as hybrid and electric vehicles, mobile...

Read More »
DC Gear Motor develops 22 lb-in. torque at 205 rpm.
DC Motors

DC Gear Motor develops 22 lb-in. torque at 205 rpm.

Accepting any 24 Vdc source, Model No. MMP-TM55-24V GPk52-022 produces output rated for 2.5 Nm continuous torque at 205 rpm and 9.0 Nm peak. It measures 7.25 in. long x 2.14 in. dia and has 25 mm long x 12 mm dia keyed output shaft. Mounted via 4 face mount M5 threaded holes equally spaced on 40 mm dia B.C., motor requires 3.6 A @ 24 Vdc to generate Full Load Output Torque. Unit is rated to IP54...

Read More »
DC Motors

Brush DC Servo Motors deliver maximized continuous torque.

Suited for heavy-duty power applications, brush-commutated MAEÂ-® Series 600 achieves continuous torque up to 198 oz-in. and speeds up to 3,500 rpm. Units feature ball bearings, 4-pole stators, and 21-slot armatures to minimize magnetic cogging and enable smooth, quiet operation. Motors are suited for data storage, medical/biotech, semiconductor processing, and automation applications.

Read More »
DC Motors

Gearmotor develops 22 lb-in. torque at 200 rpm.

Accepting any 12 Vdc source including battery power, Model MMP-TM55-12V GP52-022 measures 2.14 in. dia x 7.25 in. long and has 12 mm dia x 25 mm long keyed output shaft. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia BC. Requiring 7.2 A at 12 Vdc to generate full load output torque, gearmotor is rated for 2.5 Nm continuous torque at 209 rpm and 9.0 Nm...

Read More »
DC Motors

Brush DC Servomotors achieve speeds to 5,400 rpm.

Available in 2 lengths, MAEÂ-® Series 500 can provide continuous torque up to 57 oz-in., depending on model. Units include 11-slot armatures to minimize magnetic cogging, ball bearings, and 2-pole stators. Speed, voltage, current, and torque characteristics can be tailored to meet exact application requirements. Motors are suited for data storage, medical/biotech, semiconductor processing,...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics