DC Motors

DC Motors

DC Gearmotor accepts any 24 Vdc source.

Measuring 2.14 in. dia x 7.25 in. long, Model MMP.TM55-24V.GPK52-029.1 has keyed output shaft of 12 mm dia by 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes, equally spaced on 40 mm dia BC. Output is rated for 2.9 Nm continuous torque at 160 rpm and 9 Nm peak. Motor requires 3.0 A at 24 Vdc to generate full load output torque. Options include optical encoders, failsafe...

Read More »
Synchronous Motors suit hazardous locations.
DC Motors

Synchronous Motors suit hazardous locations.

Superior Electric Series XCE satisfies ATEX standards for use in potentially explosive atmospheres as defined by CE directive 94/9/EC. Motors have flameproof enclosure with max surface temperature of 100°C. Requiring only resistor-capacitor network to operate from single-phase ac utility power, units turn at speeds of 72 rpm with 60 Hz or 60 rpm with 50 Hz. They are available with torques...

Read More »
DC Motors

Brushless Servomotors feature stainless steel construction.

SSMSM series servomotors, available in standard and low inertia models and 5 frame sizes, provides continuous torque to 280 lb-in with peak torques ranging 3-4 times continuous. Rated IP67, they withstand 1,500 psi washdown conditions and can be used in harsh, corrosive, high hygiene environments. With UL, CSA CE and BISSC agency approvals, typical applications include food/liquid processing,...

Read More »
Motor/Control Package reduces wiring and panel space.
DC Motors

Motor/Control Package reduces wiring and panel space.

INTEGRAmotor integrates brushless dc motor and speed control in one package, minimizing both EMI and installation time. It operates from regulated 24 Vdc power supply and is available with or without integral gearbox; parallel and in-line gearboxes are offered with outputs from 1.0-2,500 rpm. Stock models accept analog ±5 Vdc input signal for speed control or direction. Hollow shaft and OEM...

Read More »
Brushless DC Motor is designed for low voltage applications.
DC Motors

Brushless DC Motor is designed for low voltage applications.

At 48 V, Model 000-0358 brushless DC frameless motor operates at 200 rpm and delivers 600 oz-in. of torque with 80% efficiency and can deliver burst of stall torque up to 1,300 oz-in. Compact 6.5 in. dia x 2 in. long motor utilizes high-energy, high-temperature, rare-earth magnets, making it suitable for use in applications where demanding temperatures are found. Custom mounting configurations...

Read More »
DC Motors and Gearmotors suit wet and humid areas.
DC Motors

DC Motors and Gearmotors suit wet and humid areas.

With max rating of Â-¼ hp @ 2,500 rpm, DC Washguard® products meet IP55 environmental conditions and feature stainless steel or Mirolon 3300 fortified Teflon® output shafts. Motors are offered with face or base mounting. Gearmotors with parallel output shaft have ration options from 5:1 up to 336:1, with full-load torque exceeding 300 in-lbs. Right angle shaft configurations...

Read More »
Drum Motors solve material handling challenges.
DC Motors

Drum Motors solve material handling challenges.

With motor, transmission, and bearings totally enclosed in drum shell, Series BLD conveyor drive systems produce noise levels of 50 dB, meeting OSHA requirements. Rated from 0.11-7.5 hp and running at 96% efficiency, drum motors range in diameter from 3.18-12.6 in. with face widths from 7.8-67 in. Belt speeds range from 23-1,369 fpm. Mounted with 2 brackets, sealed-for-life units are virtually...

Read More »
DC Motors

Brushless DC Servo Motor features D-sub connector.

Legend SmartMotor Model SM1720D is available with double D-sub connector with 15-pin D-sub I/O and 7-pin combo D-sub power and I/O. Connector provides resistance to harsh environments and compatibility with existing systems. Model SM1720D offers fully-integrated motion control capability.

Read More »
Gearless Motors deliver more than 100 lb-in. torque.
DC Motors

Gearless Motors deliver more than 100 lb-in. torque.

Featuring enclosed construction, e-TORQ Direct Drive Brushless DC Servo Motors are available in widths under 2 in. and diameters from 7-14 in. and larger. Compact products employ electromagnetic design with ironless stator. Lack of iron saturation provides maximum torque linearity, meaning that torque is consistent across speed range without cogging or velocity fluctuations. Motors are offered...

Read More »
Synchronous Motors offer torque limiting operation.
DC Motors

Synchronous Motors offer torque limiting operation.

Suited for applications requiring constant closing torque, RG Series utilizes magnetic hysteresis coupling between rotor and output shaft to produce constant torque when stalled. They can accelerate mass moments of inertia asynchronously, and, once synchronous speed is reached, motors maintain constant speed. Available in size 35, 50 and 64 with operation at 50 and 60 Hz, IP 40 rated motors offer...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers