DC Motors

Brush DC Motor suits space-restricted applications.
DC Motors

Brush DC Motor suits space-restricted applications.

Featuring internal, long-life brushes and Neodymium magnets, SR15 Series has 1.5 in. dia design that produces continuous torque up to 25 oz-in. and peak torque up to 150 oz-in. It can accelerate rapidly with limited impact to system, and its dual ended shaft facilitates optical encoder installation. Various electrical and mechanical options are available, including windings for specific power...

Read More »
Brushless DC Motors operate best from 300-3,000 rpm.
DC Motors

Brushless DC Motors operate best from 300-3,000 rpm.

Offered in standard torque and high torque versions, NEMA 23 BLDC Motors provide smooth, quiet operation, regardless of speed range. They are suited for applications needing high speed and high dynamic torque, or those requiring velocity control with analog input, and that do not need holding torque.

Read More »
DC Motors

Motors drive oxygen concentrator compressors.

Featuring rotor with magnetic circuit, Series TG 2300 eliminates magnet wire and iron laminations in stator. In combination with neodymium-iron-boron magnets, thin air gap creates high power density motors with high inertia, minimizing losses caused by torque pulsation and facilitating smooth, quiet operation. Oxygen concentrators using TG 2300 motors can be powered by 24 V battery, car accessory...

Read More »
6mm DC Motor with Planetary Gearhead
DC Motors

6mm DC Motor with Planetary Gearhead

The Faulhaber 0615 motor is presently the only production 6mm diameter coreless DC motor available with a matching diameter planetary gearhead. Designed with a high energy rare earth magnet and the patented Faulhaber skew-winding, it is available in 1.5, 3, and 4 Volt versions. The motor has a no-load speed of 19000 rpm and is capable of .11 mNm continuous and peak torque at stall of .24 mNm. The...

Read More »
Powerful But Small 10mm DC Micromotor
DC Motors

Powerful But Small 10mm DC Micromotor

Clearwater, Florida - MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024...S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the System FAULHABER ironless rotor and Neodymium rare earth magnets to achieve a stall...

Read More »
DC Motors

Advanced Brushless Motor and Elastomers Enhance Miniature Diaphragm Pump Capabilities

Miniature diaphragm pumps, vacuum pumps and micro air compressors have had their performance and operational life limited by standard elastomer mechanical properties and DC Brushless motor designs. As fluidic system developers have demanded smaller component envelopes, miniature air and liquid diaphragm pumps have incurred increased challenges to increase performance and life requirements....

Read More »
DC Motors

Brushless DC Servomotor suits limited-space applications.

Measuring 1.3 in. dia, ELCOM ST® Series 1300 includes 1.5, 2, and 2.5 in. long models that achieve 12.6-54.3 oz-in. peak torque and 5-9 oz-in. continuous torque. Rotor construction enables rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback. Housed in aluminum, series features 3-phase stator with 6-slot silicon steel laminations; 4-pole rotor with neodymium ring...

Read More »
Micro Motor features ceramic air bearing design.
DC Motors

Micro Motor features ceramic air bearing design.

Sensorless PM Series brushless dc micro motor has 20 mm dia sleeve, 8.4 mm high x 25 mm dia rotor, and total height of 25 mm. With ceramic air bearing design that uses air as lubricant, motor features operating voltage of 12 Vdc, 70 mA load current, speed of 10,000 rpm (typ), and operating temperature range of 0-90°C. Motor is suited for applications requiring high speed and quiet operation at...

Read More »
DC Motors

Brushless Motors suit aerospace applications.

Weighing 10.5 lb, EA Series brushless motors produce 11 kW at 6,500 rpm and operate at 12-72 Vdc up to 450 A. They feature custom housing and end bells, along with lightened rotor and titanium shaft. Developed to enable vertical take off and landing operations in unmanned aerial vehicles, motors are also suited for defense and aerospace applications such as hybrid and electric vehicles, mobile...

Read More »
DC Gear Motor develops 22 lb-in. torque at 205 rpm.
DC Motors

DC Gear Motor develops 22 lb-in. torque at 205 rpm.

Accepting any 24 Vdc source, Model No. MMP-TM55-24V GPk52-022 produces output rated for 2.5 Nm continuous torque at 205 rpm and 9.0 Nm peak. It measures 7.25 in. long x 2.14 in. dia and has 25 mm long x 12 mm dia keyed output shaft. Mounted via 4 face mount M5 threaded holes equally spaced on 40 mm dia B.C., motor requires 3.6 A @ 24 Vdc to generate Full Load Output Torque. Unit is rated to IP54...

Read More »
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics