DC Motors

Brushless DC Motor provides cog-free motion.
DC Motors

Brushless DC Motor provides cog-free motion.

With 3 mm external motor diameter and 8 mm length, Smoovy Series 0308...B combines skewed winding with jewel bearings and rotor made of Neodymium rare-earth magnets. Motor can achieve continuous output torque up to 0.014 mNm at speeds to 15,000 rpm. Due to electronic commutation, service life of motor is only limited by bearings. Series 0308...B can be combined with gearbox and linear actuator...

Read More »
Brushless DC Motor produces peak torque of 690 oz-in.
DC Motors

Brushless DC Motor produces peak torque of 690 oz-in.

Providing continuous torque rating of 230 oz-in., 8-pole NEMA 23 Motor is suited for robotic drive systems, medical equipment, and other automation applications where high torque-to-weight ratio is important. Variety of electrical and mechanical options are available including enclosed encoder and sealed design for IP65 wash down requirements. Custom mounting and winding configurations are also...

Read More »
DC Motors

Motors/Gearmotors feature built-in, pre-wired encoders.

Incodermotors(TM) are permanent magnet dc and brushless dc motors and gearmotors equipped with internal encoders. Able to work with digital tachometers or other electronic devices to measure speed, distance, and direction, 4.5-12 V magnetic encoders are available with one or 2 Hall sensor output signals in resolutions of 2, 4, 8, and 30 pulses/revolution. Type 33A and 42A permanent magnet dc...

Read More »
DC Motors

Internal Rotor Motors fit space-restricted applications.

Available in 40 mm diameter and 2 lengths of 26 and 36 mm, EC-i Motors use high-powered permanent magnets for speed stability under load. Brushless, electronically commutated units feature minimal detent and are suited for applications that require maximum drive in minimum space such as robotics, industrial automation, and security technology.

Read More »
DC Motors

SMD Micro Motors suit small device vibration applications.

Featuring 3.4 mm profile, BSY Series DC Motors are 11 mm long with typical speed of 14,000 rpm and mechanical noise of 45 dB max. Standard operating voltage is 2.7 Vdc and load current is approximately 65 mA. Intended for applications requiring small footprint on surface mount circuit board, units are suited for mobile phones and consumer medical devices as well as medical and other applications.

Read More »
Brushless Motors suit respiratory support equipment.
DC Motors

Brushless Motors suit respiratory support equipment.

Weighing 94 g and providing 50 W of power at up to 73,000 rpm, 22 mm Brushless Motors operate at 25°C with 55 dB noise level, and provide inertia as low as 2.3 x 10-7 kmgÂ-². Internal design cuts motor length and minimizes vibration. Featuring slotless technology, motors help maximize comfort of patients using Bi-Level respirators.

Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
DC Motors

Brushless DC Motors provide continuous torque to 40 oz-in.

ELCOM ST® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of Â-½,1,1½,...

Read More »
DC Motors

Custom Submersible Motor Gearbox Assembly from Empire Magnetics Make Waves in "O" by Cirque du Soleil

ROHNERT PARK, CA - Empire Magnetics, a leading supplier of specialty motor products, motion control systems and support services, is often called on to develop custom motion control solutions for unique applications and environments where standard motion control components are simply unsuitable. One of Empire's custom motor gearbox assemblies has even made its way into show business as an...

Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
DC Motors

Slotted Brushless DC Servomotors suit limited-space areas.

Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with...

Read More »
DC Micromotors include graphite commutation.
DC Motors

DC Micromotors include graphite commutation.

Featuring external motor diameter of 22 mm and length of 32 mm, Series M2232U provides stall torque of 25.62 mNm and speeds up to 10,000 rpm. Low-cog rotation is achieved through skewed laminations and tapered permanent magnet system. Available with 6, 12, and 24 V windings, Series M2232U GS has cantilevered brush system, while Series M2232U CS has cartridge brush system. Plastic and metal...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers