DC Motors

DC Motors

Fractional-HP Motors/Gearmotors survive hostile areas.

Harsh Environment IP66 Motors and Gearmotors include permanent magnet dc, brushless dc, and ac induction motors, rated from 0.05-1.0 hp, that can be coupled with right angle, parallel shaft, or planetary speed reducers to create integrated, IP66-rated gearmotor solution. Engineered for harsh environment and rugged OEM applications, products are completely watertight and capable of withstanding...

Read More »
AC Servo Motors deliver peak torque of up to 33.63 lb-in.
DC Motors

AC Servo Motors deliver peak torque of up to 33.63 lb-in.

Packaged in 1.6 and 2.4 in. square bodies with 1 or 2 winding stacks, BSM R-series brushless AC servo motors are suited for applications such as packaging and labeling, materials handling, semiconductor manufacturing, winding, and printing. They offer cog-free action and are available in continuous stall torque ratings spanning 1.4-11.24 lb-in. and in peak torques from 4.25-33.63 lb-in. Power and...

Read More »
DC Motors

DC Micromotor achieves stall torque of 42.7 mNm.

Featuring external motor-diameter of 48 mm and length of 70 mm, Series M4870U 170 W DC Micromotor reaches speeds up to 11,000 rpm. It includes iron-core construction, graphite commutation system that tolerates overload conditions, and 4.0 mm dia motor shaft for rotational stability. Unit can be combined with gearhead, encoder, and linear actuator for complete miniature DC drive system. Two...

Read More »
DC Motor performs with virtually no noise or vibration.
DC Motors

DC Motor performs with virtually no noise or vibration.

With ability to deliver up to 0.30 oz-in. continuous torque, PITTMAN® Size 04 slotless brushless dc motors come in compact .375 in. size that can accommodate range of applications characterized by small design envelopes including medical instruments, dental drills, and hand power tools. Features include Parallex coil-winding geometry, no load speeds up to 50,000 rpm, 2-pole rotor, 3-phase...

Read More »
Brushless DC Motors come in ultra-compact packages.
DC Motors

Brushless DC Motors come in ultra-compact packages.

Suited for space-constrained medical and automation applications, nuvoDisc(TM) flat brushless dc miniature motors feature 11.7 x 32 mm dia footprint. Offering speeds of up to 50,000 rpm and mechanical power output of up to 30 W, motors provide high-speed slotless design that reduces vibration and eliminates cogging to provide smooth operation. Low power consuming units are also available in...

Read More »
Motor Control replaces hydraulic motors and actuators.
DC Motors

Motor Control replaces hydraulic motors and actuators.

Combining fly-by-wire electronic controller, brushless DC motor, and 2-stage planetary gearbox, Integrated Motor Control covers operating voltages from 24-48 Vdc, provides 35-235 Nm peak torque, and uses CANopen communications protocol. Gearbox uses straight and helical gears and is fully greased for quiet operation. Measuring 7.3 x 3.2 x 5.4 in., control can open and close hoppers, valves, and...

Read More »
DC Motors

Brushless DC Motor produces continuous torque of 1,600 oz-in.

Featuring peak torque of 4,800 oz-in., 8 pole NEMA 42 DC motor is suited for unmanned vehicle and HEV systems, hydraulic pumps and power steering systems, packaging equipment, and other automation applications where high torque to weight ratio is needed. Variety of electrical and mechanical options are available including encoders, connectors, or sealing for IP65 wash down requirements. Custom...

Read More »
Starter Kit aids rapid prototyping of brushless DC motors.
DC Motors

Starter Kit aids rapid prototyping of brushless DC motors.

Designed to facilitate work with MicroMo miniature synchronous motor, Microsystems Starter Kit contains drive electronics, adaptor board, and motor. Adapter board has integrated oscillator for speed control, PWM frequency of 500 kHz, and direction of motor rotation is reversible. Kit accommodates DC Brushless motors series 0206...B, 0308...B, and 1202...BS/BH, which offer respective continuous...

Read More »
DC Servo Motors deliver up to 2 oz-in. continuous torque.
DC Motors

DC Servo Motors deliver up to 2 oz-in. continuous torque.

PITTMAN® Series 6000(TM) 22 mm dia brush-commutated motors incorporate skewed 5-slot armature design and bonded neodymium iron boron magnets. They are available in 1.256, 1.556, and 1.901 in. lengths with 0.80, 1.3, and 2 oz-in. continuous torque, respectively, and can generate maximum peak torques up to 10.2 oz-in. Features include sintered bronze bearings, 2-pole stators, heavy-gauge...

Read More »
Brushed DC Motors suit high-volume manufacturing jobs.
DC Motors

Brushed DC Motors suit high-volume manufacturing jobs.

Offered in 2 versions, 25 mm Brushed Ironless DC Motors feature metallic front end, optional integrated EMC filter, and carbon brush commutation method. Rotational spring delivers constant force, promoting brush life and minimizing motor sensitivity to vibration shocks. While 25G version measures 53 mm long, weighs 145 g, and provides 40 W of power with 40 mNm continuous torque, 25GST version is...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers