DC Motors

DC Motor weighs less than 4 grams.
DC Motors

DC Motor weighs less than 4 grams.

Measuring 8 mm in diameter and 16 mm in length, Model RE 8 features pencil-thin ceramic shaft that measures 0.8 mm in diameter and turns into 2 sleeve bearings. Precious metal brushes ensure constant and low contact resistance between brushes and commutator, even after pro-longed standstill. With ironless winding, motor is suitable for network-independent applications, such as lasers, leveling...

Read More »
THINGAP® Announces: Mobile Tool Management Selects TG 2300ENC NonCogging Brushless Motor for Portable NC Drill/Probe System
DC Motors

THINGAP® Announces: Mobile Tool Management Selects TG 2300ENC NonCogging Brushless Motor for Portable NC Drill/Probe System

VENTURA, CALIFORNIA - OCTOBER 2, 2008 - ThinGap LLC, the leader in high power density DC motors, today announced that Mobile Tool Management has selected the TG 2300ENC noncogging brushless motor with encoder for its MiniFlexTrack portable NC drilling, grinding, and probe positioning system for curved surfaces. The zero-cogging characteristic of the TG 2300ENC brushless motor ensures precise...

Read More »
Brushless Motor comes with integrated controller.
DC Motors

Brushless Motor comes with integrated controller.

Useful where programmable movement of simple mechanisms is required, Motomate incorporates brushless motor drive, 30 or 80 W motor, gearbox, and Crouzet Milleneum2 controller in one package. Motor incorporates power electronics, exhibits 90% efficiency, and produces up to 0.3, 3.5, or 30 Nm in direct drive, right-angle, or planetary configuration, respectively. Graphical function blocks...

Read More »
DC Motors

Brush Motor provides high continuous power capacity.

Measuring 2 in. dia x 5.3 in. long, Model TGB2020 delivers up to 440 W and 425 oz-in. peak shaft torque. Unit feature rare earth magnets and high copper density, ironless coil, which provides heat dissipation and zero cogging. With max efficiency of 90%, motor is suited for driving low profile vehicles, power tools, and any load that requires small cross section. In blower and thruster...

Read More »
Brushless DC Motor has integrated controller.
DC Motors

Brushless DC Motor has integrated controller.

Used where programmable movement of simple mechanisms is required, Motomate incorporates Milleneum2 controller, brushless motor drive, motor, and gearbox in 2½ x 6 in. package. Brushless motor, available with 30 or 80 W rating, comes in several configurations, has 90% max efficiency rating, and integrates necessary power electronics. Programmable product offers analog output and internal...

Read More »
DC Motors

Brush DC Motors provide output power up to 9 W.

Available in 12, 16, and 22 mm frame sizes, Athlonix(TM) Motors feature coreless design with self-supporting coil and magnetic circuit. Units offer efficiency ratings approaching 90%, depending on motor load conditions. With maximum continuous torque up to 16.5 mNm and optimal angular acceleration, RoHS-compliant motors are suited for medical analyzers and electronic assembly that require...

Read More »
DC Motors

Brushless DC Motor achieves high torque at slow speeds.

Available in 2 lengths, EC-powermax 22 has operating range of 90-120 W and can be combined with 32 mm planetary gearheads using Maxon's modular system. Rotor is comprised of 2 pole pairs and fitted with magnetic material. For electronic commutation, magnetic field is sensed through Hall sensors, and rotor position detected. Product has no detent because of grooveless stator, optimizing control...

Read More »
Integrated Motor System features 24 V brushless DC motor.
DC Motors

Integrated Motor System features 24 V brushless DC motor.

Integrated Motor System incorporates sin/cos optical encoder with 3.2 million counts/rev and 1 electrical cycle every 20 microns. Combination of 82 mm scale diameter with amplifier interpolation settles system resolution at 0-1 encoder counts. Measuring 20 mm dia and 40 mm long, hollow shaft features ABEC7 precision ball bearings and rotates within 0.0001 in. runout and 0.027 ±0.008°...

Read More »
Closed Loop Digital Interface For Precise AC Or DC Drive System Control
DC Motors

Closed Loop Digital Interface For Precise AC Or DC Drive System Control

Dart Controls offers the ASP40-420 for applications that require a closed-loop digital interface with a 4-20mA isolated input/output signal and programmable relay outputs. Ideal for use with AC or DC drive systems in chemical metering, mixing, and other process control applications. Custom faceplate artwork is available also. Dart Controls, Inc. is an ISO9001:2000 registered designer,...

Read More »
DC Motors

Parallel Shaft Gearmotors have 32:1 to 430:1 gear ratios.

Designed as Von Weise drop-in replacements, VWDIR83 permanent magnet gearmotors are available in 12 standard models, 6 each for 12 and 90 Vdc inputs. With fixed output speeds ranging from 6-93 rpm and output torques from 50 to 13 in.-lb, units feature 1/30 hp permanent magnet dc motors with replaceable brushes, grease lubrication, and all-position face mounting with 50 lb overhung load rating....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers