DC Motors

NORD Drivesystems Geared Motors for Rolling Mills
DC Motors

NORD Drivesystems Geared Motors for Rolling Mills

In recent years, NORD Drivesystems has been very active in the steel industry in China and India. NORD has supplied 2,500 geared motors to the Shanghai Baosteel Group Corporation for a heavy plate mill in Pudong which produces, sheets for the ship building industry, amongst others. Roll table drives are essential parts of a steel mill's equipment. They need to be fully reliable, or else entire...

Read More »
DC Servo Motors combine compact design, high performance.
DC Motors

DC Servo Motors combine compact design, high performance.

Comprised of 1.18 in. dia models available in 2.114, 2.585, and 3.057 in. lengths, brush-commutated 8540 Series delivers optimized power density via use of bonded neodymium magnets. Continuous torque ratings from 2.5-8.3 oz-in. are achieved without heat sink, and 8 standard windings are available from 9.55-48 V; customized windings may also be designed for specific applications. Other features...

Read More »
BLDC Limited Angle Torque Motor features zero cogging.
DC Motors

BLDC Limited Angle Torque Motor features zero cogging.

Featuring 100.0 mm diameter and 100.0 mm stack length, Model LAT40-48 delivers peak torque of 21.5 Nm and ±15° stroke. Use of rare earth magnets creates power density of 10.08 oz-in./W, while single phase winding provides control - 30° excursion is accomplished with no commutation. Since rotor has no preferred position, cogging is eliminated, enabling smooth performance for...

Read More »
Makita Lights up Annual STAFDA Trade Show with More Innovation
DC Motors

Makita Lights up Annual STAFDA Trade Show with More Innovation

La Mirada, CA - Makita joined over 4,000 industry professionals at the annual convention of the Specialty Tools & Fasteners Distributors Association (STAFDA) in San Antonio last week. Makita took the opportunity to demonstrate new solutions for the professional trade including brushless motors, new dust extraction solutions, new additions to the growing line-up of 18V Lithium-Ion Cordless tools,...

Read More »
Custom Right Angle Gear Motors offer 25-125 rpm output speeds.
DC Motors

Custom Right Angle Gear Motors offer 25-125 rpm output speeds.

Powered by DM30 permanent magnet motor in voltages from 12-240 Vdc, Series DR250 provides continuous output torques to 250 lb in. Single reduction worm drive gear motors feature steel and bronze gear train, offering OEMs quiet operation in UL Recognized design. Built in USA, units are suited for battery or AC powered lifting and moving applications, such as wheelchair lifts, welding wire feeds,...

Read More »
DC Motors

DC Motor uses Ferrite magnets for optimal power density.

Characterized by metal brush-end shield and 5 mm shaft, 40 mm DC Motor has 7-slotted armature that allows for maximum copper fill. Drive elements such as pinions and pulleys may be incorporated, and standardized lead wires that exit either axially or radially give motor additional flexibility in various mounting positions. In addition to office and paper-handling applications, motor is suited for...

Read More »
DC Motors

National Instruments Introduces New Vision and Motion Hardware with NI RIO Technology

NI LabVIEW FPGA-Powered Frame Grabber and Motion Drive Help Engineers Create Custom Inspection and Machine Control Solutions AUSTIN, Texas -- National Instruments (Nasdaq: NATI) today introduced two new additions to its popular NI reconfigurable I/O (RIO) technology including a reconfigurable Camera Link frame grabber for demanding embedded vision applications and a motion module for the NI...

Read More »
IP65 Brushless DC Motor is built for continuous duty.
DC Motors

IP65 Brushless DC Motor is built for continuous duty.

Built to operate under continuous load of 100 oz-in. at speeds of 6,000 rpm, IP65 washdown rated DIH27-63-BDNA offers peak torque capabilities of 450 oz-in. and incorporates corrosion-resistant, machined aluminum housing with black anodized coating. Cable strain relief, sealed bearing, and completely enclosed system guard against leaks while providing added protection for internal electrical...

Read More »
Coreless DC Motors suit intrinsic safe, portable applications.
DC Motors

Coreless DC Motors suit intrinsic safe, portable applications.

Delivering efficiencies approaching 90%, Athlonix(TM) series satisfies intrinsic safety application requirements with REE (Reduced Electro Erosion) technology. Motors incorporate salient features such as low moment of inertia, no cogging, low friction, and compact commutation, lending to increased acceleration and continuous torque as well as minimal joule losses. Max continuous torque ratings...

Read More »
Brushless DC Motor offers various gear and encoder options.
DC Motors

Brushless DC Motor offers various gear and encoder options.

Measuring 45 mm in diameter, 70 W Brushless DC Flat Motor is available with Hall sensors and comes in 4 windings of 24, 30, 36, and 48 V. Unit delivers max continuous torque of 130 mNm at up to 85% efficiency. Motor can be combined with more than 54 planetary and spur gearheads. Designed as internal or external rotor motor, unit is suited for self-contained drive systems as well as industrial...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers