Cutting Tool Inserts

Cutting Tool Inserts

Insert has diamond-like carbon coating.

Grade DL1000, with blue-luster diamond-like carbon (DLC) coating, maintains corrosive resistance and low friction coefficient of .05-.2 and promotes good chip control. Aluminum-alloy adhesion on edge is suppressed to decrease cutting resistance. Generation of build-up edge is suppressed, maintaining sharpness of edge. Insert suits dry machining of aluminum alloys and non-ferrous applications.

Read More »
Cutting Tool Inserts

Solid CBN Insert suits hard turning applications.

SumiBoron® BNS800 grade insert offers multiple corners and high CBN content. Available with multiple geometries, insert provides high fracture toughness, heavy depth of cut capabilities, and high thermal conductivity. Applications include cylinder bores, brake and disc rotors, and hard turning. Materials suitable for machining are gray cast iron, colmonoy, hard facing alloys,...

Read More »
Machining Inserts handle high-temperature alloys and iron.
Cutting Tool Inserts

Machining Inserts handle high-temperature alloys and iron.

SpectraTurn(TM) and SpectraMill(TM) milling and turning inserts are PVD-coated with titanium-aluminum nitride or aluminum-titanium nitride. Other products include M750 Milling System for malleable and cast irons; SV209- and VC949-coated carbide grades for turning titanium, titanium-alloys and nickel- and cobalt-based alloys; and APET high-shear, PCVD-coated TPC25 carbide inserts for stainless and...

Read More »
Cutting Tool Inserts

Milling Products suit die and mold industries.

CoroMill Century facemill is available in 1.5 to 6.0 in. dia and is capable of 40,000 rpm. It uses carbide or polycrystalline diamond inserts and micro-adjustable mating pockets. CoroMill 390 long-edge facemill is available in 2 to 8 in. dia and uses 18 mm long inserts for deep cuts in high-temperature alloys. CoroTurn family consists of extra-sharp, high positive rake, V-style inserts for smooth...

Read More »
Inserts handle high temperature alloys and iron.
Cutting Tool Inserts

Inserts handle high temperature alloys and iron.

New products include wiper geometry PVD milling and turning inserts; M750 Milling System for malleable and cast irons; SV209 and VC949 coated carbide grades for turning titanium, titanium alloys, and nickel and cobalt based alloys; and APET high shear PCVD coated TPC25 carbide inserts for stainless and high temperature alloys. PVD coated SpectraTurn(TM) and SpecraMill(TM) inserts are coated with...

Read More »
Coated Carbide Inserts can turn tough alloys.
Cutting Tool Inserts

Coated Carbide Inserts can turn tough alloys.

Carbide cutting tool inserts handle high temperature alloys. SV209 has micro-grain carbide substrate with multi-layer CVD coating, while VC949 has aluminum titanium nitride PVD coating over micro-grain carbide substrate. SV209 can turn chrome cobalt alloys, inconels, hastelloys, stellites, and stainless steels. VC949 can turn titanium and titanium alloys. Both grades are available in LM...

Read More »
Cutting Tool Inserts

Inserts feature tip geometry that doubles tool's life.

Inserts are designed for use with ALORIS/YESTOOL line of Quick Tip Indexable Single Carbide Insert Drills. Insert life is doubled in 300 series stainless steel applications at rates of 160 sfm. Inserts are also recommended for use in Titatnium and Inconel. Sizes range from 8.0 to 50.8 mm in .1 mm increments. Drill bodies are available in flute lengths of 3x, 5x, and 7x length to diameter, and...

Read More »
Inserts increase milling productivity.
Cutting Tool Inserts

Inserts increase milling productivity.

X500 milling grade inserts are suitable for machining PH stainless steels, high-temperature alloys, titanium, and alpha and beta titanium alloys, as well as iron, cobalt, and nickel-based metals. Substrate and coating combination increases transverse rupture strength up to 25% with improved thermal stability, providing faster cutting feed rates and increasing parts per edge. In one application,...

Read More »
Cutting Tool Inserts last 40% longer than before.
Cutting Tool Inserts

Cutting Tool Inserts last 40% longer than before.

CoroCut(R) parting and grooving tools provide good surface finish and have 20 to 40% longer tool life than previous tools. They withstand high axial cutting forces, maximize feed without vibration, and work on materials ranging from aluminum to hardened steels and heat resistant super alloys (HRSAs). Tools are available in Grade H10 carbide, in PVD-TiAIN coated carbide grades, and in four...

Read More »
Inserts combine grooving and turning.
Cutting Tool Inserts

Inserts combine grooving and turning.

GROOVE 'N TURN(TM) inserts are available in 2 sub-micron grain carbide grades, DM-2(R) for steel and interrupted cutting, and DM-5(R) for aluminum and other non-ferrous alloys. Groove width sizes include .020, .030, .040, .060, .080, .100, and .125 in. with either sharp corners or .007 in. corner radius. Uncoated and TiN coated inserts are in stock. TiCN, TiAIN and diamond coatings are also...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers