Cutting Tool Inserts

PCD Inserts offer optimized wear resistance.
Cutting Tool Inserts

PCD Inserts offer optimized wear resistance.

Made of polycrystalline diamond, WDN10 Inserts deliver optimized hardness, low coefficient of friction, and minimum heat distortion, helping to maximize productivity in high-speed machining of non-ferrous materials. Cutting edge sharpness, resulting from PCD grain size and manufacturing process, enables inserts to achieve optimized surface finishes. Products boast chip breaker geometry and are...

Read More »
Indexable Inserts offer high temperature and wear resistance.
Cutting Tool Inserts

Indexable Inserts offer high temperature and wear resistance.

Available for all XtraÂ-·tec® and M4000 face and shoulder mills, as well as Walter F2334 copy milling cutter, Tiger·tec® Silver grade WSM45X Inserts combine high-performance substrate and AI2O3 coating for optimized toughness and hardness when working with materials that have difficult cutting properties, such as titanium alloys. Extremely smooth surfaces minimize edge...

Read More »
Steel Turning Tool offers stable insert clamping.
Cutting Tool Inserts

Steel Turning Tool offers stable insert clamping.

Suited for longitudinal and face turning, CoroTurn® 300 uses iLock™ interface forÂ- stable insert clamping. System securely locks insert in place to prevent cutting forces from affecting tool position and provides tool accuracy within ±.002 in. Eight-edged inserts are available in grades GC4325 and GC4315 featuring Inveio™ coating, a uni-directional crystal orientation for...

Read More »
End Mill handles small diameter cutting.
Cutting Tool Inserts

End Mill handles small diameter cutting.

Suitable for all machine types, CoroMill® 390 with size 07 inserts supports shoulder milling, edging, linear and helical ramping, plunge milling, slot milling, and face milling. Grades are available for all materials.Â- Insert grade GC1130, produced with Zertivo™ technology, gives cutter extra dimension of security when milling steel. Featuring built-in spring...

Read More »
Ceramic Inserts bolster performance in unstable conditions.
Cutting Tool Inserts

Ceramic Inserts bolster performance in unstable conditions.

Secomax™ CS100 sialon ceramic grade inserts with T-style edge, featuring free-cutting, sharp geometry,Â- deliver strength, stability, and longevity needed for machining of nickel-based superalloys in unstable conditions. Inserts are available in 20° chamfers ranging from .002–.004 in. wide, and sharp, negative reinforced cutting edges absorb cutting force and...

Read More »
Cutting Tool Inserts

Chipbreaker Inserts handle difficult to machine materials.

Featuring sharp positive geometry with inclination cutting edge of 14.5°, SF Chipbreaker is suitable for finishing applications in continuous cut with very low cutting forces. SM ChipbreakerÂ- consists of wear-resistant, universal geometry for medium machining, suitable for continuous and interrupted cut. Both are available in variety of grades and are suitable for materials with poor...

Read More »
Point Drill Insert supports drilling of cast materials.
Cutting Tool Inserts

Point Drill Insert supports drilling of cast materials.

In addition to optimized geometry for maximum productivity in cast iron materials, Model P6005-WKK45C has 110° prismatic seat for minimal run-out and stable positioning as well as chamfered corners for stability in abrasive conditions. Thick coating with multi-layer structure provides alternate layers of hard wear, heat, and abrasive resistance. Inserts are color-coded for easy selection...

Read More »
PCD-Tipped Milling Inserts provide smooth finishing.
Cutting Tool Inserts

PCD-Tipped Milling Inserts provide smooth finishing.

Used with Turbo 10 cutters, PCD05 and PCD20 produce optimized surface quality in finish machining applications involving aluminum and titanium alloy workpiece materials. Products are also highly effective in cutting polymers and fiber-reinforced composites. Featuring solid carbide insert bodies, PCD05 and PCD20 come in X010 insert size with corner radius of .016 in. and wiper length of 0.43 in....

Read More »
Wear-Resistant Insert Grades machine challenging materials.
Cutting Tool Inserts

Wear-Resistant Insert Grades machine challenging materials.

With edge toughness and high chip resistance, TH1000 TiSiN-TiAlN nanolaminate PVD-coated grade enables manufacturers to tackle variety of ISO H5-H10 applications as well as maintain long tool life when machining hardened steels from 50–62 HRC, hard surfaced components, and superalloy materials. Suited for processing hardened steels from 40–55 HRC, Duratomic® TH1500 grade allows...

Read More »
Millstar Partnership Helps Bring CNC Technology to the Classroom
Cutting Tool Inserts

Millstar Partnership Helps Bring CNC Technology to the Classroom

Birmingham, Mich – In a continued effort to advance hands-on classroom learning in engineering technology, Millstar has partnered with Seaholm High School in Birmingham, Mich. Millstar's most recent donation - a collection of tool holders, collets, shell cutters, carbide inserts and Solid carbide end mills - helped provide students with the tooling and applications needed to approach CNC...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers