Cutting Tool Inserts

Coated Cemented-Carbide Grade is suited for steel turning.
Cutting Tool Inserts

Coated Cemented-Carbide Grade is suited for steel turning.

GC4325 indexable inserts are designed for increased cutting speeds and longer, more predictable tool life with high reliability over extended broad ISO P25 application area. Insert substrate and coating withstand elevated temperatures, reducing effect that causes excessive wear. Capability to maintain insert edge line at high temperatures promotes cutting speeds and security through more...

Read More »
Carbide Inserts suit cast iron turning applications.
Cutting Tool Inserts

Carbide Inserts suit cast iron turning applications.

While AC405K grade offers wear and deformation resistance for finishing grey cast iron at continuous high speeds, general-purpose AC415K grade provides stable turning in range of grey and ductile cast iron applications. When performing interrupted or unstable turning, AC420K grade features fracture resistance that promotes stability. Each grade in AC400K Series utilizes EGZ chipbreaker for...

Read More »
Insert Geometry is optimized for grooving and groove turning.
Cutting Tool Inserts

Insert Geometry is optimized for grooving and groove turning.

Walter Cut UD4 features multifunctional chip breaker design with double geometry that optimizes chip control. While silver surface facilitates wear detection, 0° primary chamfer strengthens cutting edge. Tiger•tec® Silver PVD Al2O3 coating minimizes friction and promotes wear resistance, while design promotes full usage of cutting edges. ApplicationsÂ- include...

Read More »
Turning Inserts suit small parts machining.
Cutting Tool Inserts

Turning Inserts suit small parts machining.

Featuring 15° nose and sharp 8° main edge, MESI Chipbreakers provide low cutting force and offer wear resistance in applications using titanium. Wavy cutting edge maintains chip control for bar feeder machines, while incorporation of dimples minimizes cutting temperatures. Available in CCGT, DCGT, and VCGT geometries, MESI is suitable for medical parts and high precision parts...

Read More »
Turning Inserts handle difficult machining applications.
Cutting Tool Inserts

Turning Inserts handle difficult machining applications.

Designed for semi-finishing and medium machining of high temperature alloys, NMS geometry can also be used on ISO M materials.Â- NRS geometry is suitable for roughing high temperature alloys and for machining of forged and cast surfaces. For finishing titanium alloys, NFT geometry is resistant to crater wear. NRR geometry is suited for heavy roughing of forged materials, with cut...

Read More »
Uncoated CBN Grade machines powdered metal with precision.
Cutting Tool Inserts

Uncoated CBN Grade machines powdered metal with precision.

In addition to offering range of edge preparations for machining sintered alloys of any hardness, uncoated BN7500 CBN Grade provides multi-tip inserts. Machining stability is provided throughÂ- 5 edge preparations, each serving significant purpose and providing distinct advantage for use in different applications. Along with standard edge preparation, BN7500 is available in LF (burr...

Read More »
Coated Inserts increase cast iron, steel machining productivity.
Cutting Tool Inserts

Coated Inserts increase cast iron, steel machining productivity.

Suitable for wet or dry machining, Tiger•tec® Silver ISO K inserts promote performance and reliability when working with grey cast iron, ductile iron, and higher strength steel alloys. Aluminum oxide coating features optimized microstructure that delivers resistance to crater wear and heat,Â- and post-coating treatment increases edge toughness and process reliability while...

Read More »
Steel Turning Inserts promote productivity, process reliability.
Cutting Tool Inserts

Steel Turning Inserts promote productivity, process reliability.

Intended for steel turning, Tiger•tec® Silver TurningÂ- Ã‚ includes indexable inserts in 3 grades – WPP10S (ISO P10), WPP20S (ISO P20), and WPP30S (ISO P30) – and 4 geometries: FP5, MP3, MP5, and RP5. Products have CVD coating and handle various materials, including unalloyed/alloy steel, cast steel, stainless ferritic/martensitic steel, and ductile cast iron....

Read More »
Indexable Ceramic Inserts suit super alloy turning operations.
Cutting Tool Inserts

Indexable Ceramic Inserts suit super alloy turning operations.

Used for turning applications involving Inconel, Waspaloy, Stellite, and other heat-resistant super alloys, silicon nitride-based WIS10 (Sialon ceramic) and WWS20 with silicon carbide whiskers (Whisker ceramic) are optimized for hardness, heat resistance, and wear resistance.Â- WIS10 suits light roughing to semi-finishing operations, while fracture-resistant WWS20 delivers toughness for...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics