Cutting Tool Inserts

Universal PCBN Insert Grade suits high-volume roughing.
Cutting Tool Inserts

Universal PCBN Insert Grade suits high-volume roughing.

Combining 90% cBN content, multi-modal grain size, and Al ceramic binder, CBN600 Insert Grade is suited for rough turning operations that involve grey cast iron, high chrome iron, and high manganese steel materials. Solid insert tackles abrasive workpiece materials, heavy cutting forces, and high levels of thermal shock for varying depths of cut conditions. CBN600 encompasses 9 standard products...

Read More »
Turning Insert Grades balance toughness and hardness.
Cutting Tool Inserts

Turning Insert Grades balance toughness and hardness.

Suitable for machining steel alloys, cast irons, and stainless steels, TP2501, TP1501, and TP0501 with Duratomic Technology combine benefits of advanced aluminum-oxide coatings with specially developed compositions of tools' bulk substrates and cobalt-enriched zones. Modifications of those elements make grades both tough and wear-resistant. Available in broad range of sizes and geometries,...

Read More »
Indexable Insert Cartridges enhance face milling operations.
Cutting Tool Inserts

Indexable Insert Cartridges enhance face milling operations.

Offered in 2 geometries, FR751M and FR752M make performance of tangential indexable inserts available for adjustable face milling. Walter BLAXX shoulder mill, whichÂ- produces precise, near step-free 90° shoulders, is available for tool diameters up to 6.30 in. When F2010 face mill is equipped with FR751M or FR752M cartridge, this technology can be applied up...

Read More »
Seco Brings Comprehensive Cutting Tool Innovations to TECMA 2015
Cutting Tool Inserts

Seco Brings Comprehensive Cutting Tool Innovations to TECMA 2015

TROY, Mich. — At TECMA 2015, Seco Tools, LLC will showcase numerous cutting tool innovations that bring enhanced productivity and value to a variety of metalworking operations. Visitors to Seco stand 848 at the Expo Bancomer Santa FÃ-© in Mexico City, March 3-6 will discover several new milling cutters, as well as the latest turning and threading solutions.  Square Shoulder Milling...

Read More »
Square Shoulder Mills take large depths of cut.
Cutting Tool Inserts

Square Shoulder Mills take large depths of cut.

Available in 6 grades, R220.LN14 Mills provide 4 cutting edges with 0.551 in. cutting edge length. Negative rake, 0.28 in. thick inserts enable heavy cuts in difficult materials and long-reach applications. Standard tools are able to take depths of cut up to 0.551 in., while helical versions come in cutting edge lengths for both contouring and slotting applications. R220.LN14 cutters are suitable...

Read More »
Indexable Inserts feature positive geometry.
Cutting Tool Inserts

Indexable Inserts feature positive geometry.

Featuring positive cutting edge design, FP4, MP4, and RP4 are available with WPP10S, WPP20S, and WPP30S Tiger•tec Silver® cutting grades. FP4 is optimized for finishing, while MP4, available with two clearance angles of 7° and 11°, is intended for mid-range machining of materials such as structural steel or other low-carbon steels. Both have been optimized for short chip...

Read More »
Cutting Tool Inserts

Turning Inserts ensure smooth machining.

Featuring Universal Roughing geometry, WIDIA Victory™ Inserts deliver optimized chip flow that results in smooth machining and extended tool life. WIDIA Victory FS geometry consists of ground, high positive design best used in finishing tasks where surface finish and minimized part deflection are critical. Inserts handle difficult-to-machine materials like Inconel and Rene in complex aerospace...

Read More »
Cutting Tool Inserts support cast iron and steel turning.
Cutting Tool Inserts

Cutting Tool Inserts support cast iron and steel turning.

Featuring bronze TiOCN top coating that offers wear resistance and functions as wear indicator, Beyond Drive™ Inserts are designed for turning cast irons, steels, and stainless steels. Post-coat surface treatment optimizes edge toughness and depth-of-cut notch resistance, while micro-polished surface minimizes friction and workpiece sticking. In addition, fine-grained alumina layer allows for...

Read More »
Steel Turning Grades optimize transmission manufacturing.
Cutting Tool Inserts

Steel Turning Grades optimize transmission manufacturing.

Offering high wear resistance, GC4315 and GC4325 with Inveio™ are designed for automotive industry. GC4315 supports soft stage turning in stable conditions, while tougher steel turning grade GC4325 manages interrupted cuts and uneven depths of cut at high speeds. If spindle speed limit prevents full use of their capacity, maximum productivity can be achieved by applying higher feed rates. Both...

Read More »
Full-Range Stellram(TM) Portfolio from Kennametal Expands Pathways to Metalcutting Excellence
Cutting Tool Inserts

Full-Range Stellram(TM) Portfolio from Kennametal Expands Pathways to Metalcutting Excellence

Commitment to “Different Thinking is Better Thinking” leads to more choices for metalworking success The high-feed 7793 high-performance cutters and inserts is one of the many outstanding Stellram solutions now available from Kennametal. Late last year, Kennametal finalized its acquisition of the tungsten materials business from Allegheny Technologies Inc., including the full line of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers