New A60/AG60 Cut MX Indexable Inserts are Designed for Small to Medium Pitch Threads
Walter’s A60/AG60 Walter Cut MX Indexable Grooving Inserts are designed for providing 60° partial-profile external threads in range of pitches 6-48 TPI—threads per inch. The units are offered with four cutting edges and are suitable for thread-turning in tight spaces. With its unique insert seat pockets, the inserts with different thicknesses can be used in same holder. Walter’s MX system...
Read More »
New Cermet WEP10 Indexable Turning Inserts Feature FP4 Soft-Cutting Geometry
Walter’s Cermet WEP10 Indexable Turning Inserts come with fine-grain titanium carbide substrate with Ni/Co binder. The unit’s FP4 geometry with edge preparation yields mirror finish surfaces at high or low cutting speeds. The WEP10 inserts are suitable for finishing operations for steels, stainless steels, and cast iron workpieces in metalworking, mechanical engineering, energy and automotive...
Read More »
New Ceramic Insert Grades are Designed for High Speed Turning Applications
Sandvik’s Ceramic Insert Grades are available in CC6220 and CC6230 models. Units are suitable for use on components made from HRSA materials. CC6230 RPGX inserts deliver cutting speeds up to 400 m/min during rough-turning operations and metal removal rate of 80 cm³/min. Units increase productivity of up to 50% than whisker ceramics and SiAlONs.
Read More »
Kennametal's New KBH10 Turning Inserts Offer Low Cutting Forces
KBH10 Polycrystalline Cubic Boron Nitride Turning Inserts are available in various geometries and edge preparations. Units are designed to deliver cutting speeds of 20% higher and provide surface roughness of Ra 0.2 and Rz 1. The Inserts are suitable for aerospace, automotive and power generation applications. KBH10 deliver a cutting speed of 180 m/min with average depth cut of 0.15 mm and...
Read More »
The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors
This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.
Read More »
Walter's New Tiger∙tec® Gold Line Extension Tools Feature Latest Coating Technology for Long Tool Life
New Tiger∙tec® Gold Line Extensions are reliable and long lasting with a smooth rake face, gold-colored top layer, a tough cutting edge and the latest coating technology. The WKP35G milling grade tool is available in both positive and negative inserts. Inserts for the Walter BLAXX shoulder milling cutters include four 90° cutting edges. M4000 extensions feature a square shape and wavy design...
Read More »
WCK10 Ceramic Grades are wear-resistant.
WCK10 Si₃N₄ Ceramic Grade is designed for roughing gray cast iron at high speeds. Units come with negative chamfer and stable dimple clamping. These grades support both wet and dry machining. Units increase process reliability and tool life.
Read More »
Walter USA's Grooving Inserts provide more stable grooving operations.
Walter USA's Walter Cut GX34 double-edged grooving and parting inserts offer improvements in several areas. The inserts are clamped with screws which provide more stable grooving operations. They also offer an extra-long length of 1.34 in., making them ideal for large diameter workpieces and turret style machines. The inserts can be used in monoblock tools as well as grooving tools with a...
Read More »
WPV10 and WPV20 Turning Inserts come with CVD coating and gold color.
WPV10 and WPV20 Turning Inserts are offered in FV5 (finishing), MV5 (medium machining), and RV5 (roughing) geometries. Units are suitable for steels (ISO P), stainless steels (ISO M) and cast iron (ISO K).
Read More »
Secomax™ CS300 Ceramic Inserts are suitable for turning operations.
CS300 Ceramic Inserts offer flank wear resistance at cutting speeds ranging from 1,970 – 3,940 ft per min and enable feeds from 0.002 – 0.006 in. per tooth. Cutter bodies are available in R220.26 and R217.26 models and feature internal air coolant channels.
Read More »
MP2050 Insert Grade is suitable for aerospace applications.
MP2050 Insert Grade is available in sizes 10, 12, 16 and 20 mm. Unit is used for milling materials such as titanium, austenitic and martensitic stainless steels. Product is offered in Highfeed, square shoulder configurations for Seco’s Turbo, Square 6™ and Square T4.
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
