Cutting Tool Inserts

Inserts feature positive rake cutting geometry.
Cutting Tool Inserts

Inserts feature positive rake cutting geometry.

Suited for plunge milling and high feed milling applications, CoroMill 210 Inserts are optimized for cutting titanium, HRSA, tool steel, and stainless steel. Ten degree entering angle allows for extreme feed rates at small axial depths of cut when face milling, and high radial depths of cut when plunge cutting in rough operations. Design of cutter body allows for use of screws with coolant holes...

Read More »
Carbide Insert extends tool life in rough boring operations.
Cutting Tool Inserts

Carbide Insert extends tool life in rough boring operations.

Suited for rough boring on cast iron materials, TN14 insert is made from hard C2 carbide substrate and features multi-layered coating to provide smooth cutting edge and abrasion resistance. Substrate and edge prep hone also provide security against chipping or fracturing when boring with interrupted cutting. Product is available in CC and SC insert styles for twin-cutter rough boring tools.

Read More »
Cutting Tool Inserts

Turning Grade machines materials from K10 to M40.

Offering wear resistance, TP2500 optimizes stainless steel turning and cast iron applications. Multi-functioning capability is achieved with functionally-graded substrate structure that provides edge toughness with no sacrifice in strength. Basic structure is aluminum oxide, and with DurAtomic process, coating is manipulated at atomic level. TP2500 is available in range of insert geometries...

Read More »
Cutting Tool Inserts

Inserts optimize steel milling operations.

Intended for shoulder milling, GC1030 features PVD coating for wear resistance and is suitable for machining difficult materials or working in unstable conditions, such as applications with long overhangs contributing to vibration problems. Designed with CVD coating, GC4240 is adaptable to all milling operations. It excels in shoulder milling and other demanding steel milling applications where...

Read More »
Cutting Tool Inserts

High Speed Steel Indexable Inserts at IMTS

4-28-06 Latrobe, PA USA High Speed Steel indexable inserts are used when machining extreme materials such as Inconel, Titanium, and Plastic. High Speed Steel inserts will be showcased at IMTS 2006 Booth E-2470. High Speed Steel is a cutting tool material used in drilling, milling, turning, threading, boring, broaching, gear cutting and many other machining operations. High Speed Steel cutting...

Read More »
PCD Insert suits many metalworking applications.
Cutting Tool Inserts

PCD Insert suits many metalworking applications.

Fine-grained Dipax(TM) D4 PCD Cutting Tool Grade is recommended for milling and rough cutting of aluminum alloys where high chip resistance is required, as well as for machining of medium-high silicon-aluminum alloys where tools need to display abrasion resistance. D4 material can also be processed with EDM and mechanical grinding.

Read More »
Grades suit steel cutting applications.
Cutting Tool Inserts

Grades suit steel cutting applications.

Featuring polished insert faces and cutting edges, AC610M and AC630M grades combine advanced substrates and wear resistant Al2O3 and TiCN coatings. Designed for general cutting of stainless steel, AC630M is resistant to peeling and notch wear, while AC610M exhibits plastic deformation control and wear resistance in high speed applications. Both models are available in positive and negative insert...

Read More »
Carbide Inserts come in narrow groove widths.
Cutting Tool Inserts

Carbide Inserts come in narrow groove widths.

Available in narrow groove widths of 1.5, 2.0, and 2.5 mm, A4 Inserts are suited for grooving, face grooving, and cutoff across variety of materials. They feature double-ended design in full radius and rectangular types, as well as precision-ground and molded-utility styles. Guide rail on top and 120° V-prism on bottom seat inserts securely in toolholder. With complete range of A4...

Read More »
Wear-Resistant Inserts suit cast iron machining.
Cutting Tool Inserts

Wear-Resistant Inserts suit cast iron machining.

Offered in more than 80 styles, ValEDGE(TM) VPQ130 Silicon Nitride grade features geometries suitable for milling, turning, and boring. Units are available in various shapes, thicknesses, relief angles, and tolerance classes, as well as dimple-style clamping, standard ANSI/ISO types, and no-hole styles for use with milling cutters, turning toolholders, and boring bar designs. Low binder content...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers