Cutting Tool Inserts

Walter USA, LLC Introduces Walter Valenite Tigerotec® Silver for Steel Turning Applications
Cutting Tool Inserts

Walter USA, LLC Introduces Walter Valenite Tigerotec® Silver for Steel Turning Applications

Three new grades and four new geometries allow the Tigerotec® Silver family of inserts to bring process improvements to nearly all steel turning applications. Waukesha, WI - Walter USA, LLC has announced Walter Valenite Tigerotec® Silver for turning...a combination of three new insert grades and four new geometries developed in parallel that can boost the productivity of steel turning...

Read More »
Turning Inserts suit small batch production.
Cutting Tool Inserts

Turning Inserts suit small batch production.

Available in 2 grades, Spectrum Turning Inserts are suited for turning in steels, stainless steels, HRSA, cast irons, titanium, and nonferrous materials. GC15 combines micro-grain cemented carbide with thin, PVD coating that adds edge strength and wear resistance, while GC30 offers bulk toughness with gradient cemented carbide substrate and wear- and heat-resistant CVD coating. Applications range...

Read More »
High-Feed Milling Inserts work on range of materials.
Cutting Tool Inserts

High-Feed Milling Inserts work on range of materials.

Based on WIDIA-Hanita(TM) X-Feed(TM) geometry, WIDIA(TM) M270(TM) Series features 2 contact faces in V-shaped pocket design to promote secure, rigid insert clamping and accurate positioning. Grade TN2505(TM) exhibits wear resistance in materials to 60 HRc, TN6540(TM) exhibits additional toughness, and TN6525(TM) suits dry-machining applications in steel. Also available, WIDIA M370(TM) Series...

Read More »
Cutting Tool Inserts

Indexable Milling Inserts excel in dry machining.

Engineered for high-speed dry machining in light to medium milling of steel and stainless steel parts under stable conditions, Beyond(TM) KCPM20 Inserts are CVD coated and have post-coat treatment on all surfaces to minimize tensile stress and micro-chipping. After coating, inserts are top- and bottom-ground for optimized seating surface in toolholder. Styles are available for face milling,...

Read More »
Indexable Inserts are effective on high-temperature alloys.
Cutting Tool Inserts

Indexable Inserts are effective on high-temperature alloys.

Walter Valenite ISO indexable inserts are designed for machining nickel, cobalt, and iron-based, high-temperature alloys. NRS geometry, useful for roughing operations, and NMS geometry, targeting medium machining and semi-finishing operations, are designed for turning operations and feature cutting edge design that minimizes effect of wear. Also, PVD-aluminum oxide coating (grades WSM10 and...

Read More »
Cutting Tool Inserts

Proper Porcerax II Mold Venting

Are your Porcerax II inserts venting as well as they could be? Fact # 1: Most Porcerax inserts are not cleaned before they are put into production, thus leaving them full of cutting fluids and graphite partials, rendering the venting insufficient. Fact # 2: Most inserts need to be returned to Molder's World, Inc. for their periodic cleaning (around 30,000 shots for PP & ABS and 20,000 shots for...

Read More »
Indexable Milling Cutters optimize steel and cast iron machining.
Cutting Tool Inserts

Indexable Milling Cutters optimize steel and cast iron machining.

Providing wear and shock resistance, CVD-Al2O3-coated Tiger-tec® Silver WKP25S maximizes productivity through ability to process all steels at high cutting speeds. Product features bicolor coating that facilitates wear detection. Grade is also suitable for machining tool steels with strengths greater than 1,000 N/mmÂ-² and when used in difficult conditions such as wet machining. In...

Read More »
Seco Tools to Unveil New Solutions with Duratomic Coating at CMTS
Cutting Tool Inserts

Seco Tools to Unveil New Solutions with Duratomic Coating at CMTS

Troy, Michigan - Seco Tools will introduce new turning insert grades and chipbreaker inserts within its exclusive Duratomic(TM) coating product line at the 2011 Canadian Manufacturing Technology Show. The company will occupy booth 2726 at the event, which takes place October 17-20 at the Direct Energy Centre in Toronto. Two new insert grades appearing at the show are TK1001 and TK2001. These are...

Read More »
Inserts and Toolholders perform grooving, parting, profiling.
Cutting Tool Inserts

Inserts and Toolholders perform grooving, parting, profiling.

Suited for use with small and micro parts, MDT 2MM has 0.078 in. wide cutting edge and Secoloc insert clamping system. There are 2 sizes of inserts and toolholders available. For Swiss machining applications, MDT19 inserts are shaped to provide insert indexing accessibility even when space is restricted. With longer reach, larger toolholders, and broader product range, MDT28 size offers solutions...

Read More »

All Topics