Controls & Controllers

Controls & Controllers, Mechanical Power Transmission

STAC6-Q-H Step Motor Drive works on anti-resonance algorithm.

Feb 27, 2017

Operating in -40 to +55 °C temperature range with 94-135 VAC, 50/60 Hz, single-phase supply voltage, STAC6-Q-H Step Motor Drive is designed with 7 digital inputs, 3 digital outputs and ±10 volt range 2 analog inputs. Delivering 120 Vdc, 1 phase, 4.24 A (rms) output power, unit is controlled with streaming commands, analog positioning, encoder following and Q programming. Featuring encoder... Read More

Controls & Controllers, Mounting & Attaching Products, Optics & Photonics

E-754 Nano Positioning Controller features 20-bit analog command interface.

Feb 27, 2017

Used in nanopositioning, nano-automation, photonics, bio-nano-technology, microscopy and micro-manipulation applications, E-754 Nano Positioning Controller features USB, Ethernet, SPI and RS-232 interfaces. Unit provides ultra-fast servo with 50 kHz update rate and 22-bit resolution. Embedded with auto-calibration chip for quick start-up and interchangeability, controller comes with software... Read More

Architectural and Civil Engineering Products, Controls & Controllers

U.S. Electric Power Companies' to Save Millions of Dollars with in-Place Substation Capacity Increases

Feb 25, 2017

Advanced motor controller technologies have demonstrated capabilities decrease alternating current motor start-up spike increment needs and to provide in-place additional capacities for growing customer KW and KWh usage..

Energy optimizing capabilities providing decreased customer electricity needs mean additional capacity and savings from existing substations with no on-site capital... Read More

Controls & Controllers

Alicat BASIS Mass Flow Controllers Chosen by VICI for Air Pollution Analyzer Calibrators

Feb 24, 2017

Accuracy, speed, size essential to operation of permeation devices

Tucson, Arizona (February 22, 2017) – Alicat Scientific’s BASIS mass flow controllers (MFCs) have been selected by Valco Instruments Co. Inc. (VICI) to precisely control gas flow rates in its Dynacal permeation devices. Alicat BASIS OEM instruments provide the control required by VICI to create gas mixes down to... Read More

Controls & Controllers, Sensors Monitors & Transducers

DG Series Thermistors feature 32 AWG dumet wire leads.

Feb 18, 2017

Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of... Read More

Controls & Controllers

55S Series Point-of-Use Panels feature metal-to-metal seal packless diaphragm.

Feb 15, 2017

Eliminating leak paths, 55S Series Point-of-Use Panels are configured for accommodating up to four individual streams of gas. Featuring optional pipe away relief valve, panels eliminate damage to equipment in case of panel failure. Units are available up to 100 PSIG outlet ranges with front and rear inlet options. Capable of handling inlet pressure up to 2400 PSIG from gas source, unit... Read More

Controls & Controllers

750-8208 PFC200 Series Controller features PROFIBUS DP Master interface.

Feb 13, 2017

Featuring compact size, large memory, firewall and secure VPN, 750-8208 PFC200 Series Controller is equipped with two Ethernet ports, CAN and serial interfaces. Unit acts as gateway between multiple fieldbuses.

Read More

Controls & Controllers

CANect® M2M and IoT Modules come with 4GB of eMMC Flash Memory.

Feb 13, 2017

Available in CL-T05 (Wi-Fi), CL-T06 (GSM) and CL-T07 (Wi-Fi & GSM), CANect® M2M and IoT Modules are designed with i.MX 6UltraLite Cortex®-A7 Core (696MHz) Microprocessor. Featuring 128 MB DDR3 RAM and USB 2.0, units are used to collect and transmit vehicle data through CANect View®, Reflector®, Portal® and Composer® applications.

Read More

Controls & Controllers

PAX®2C PID Controllers feature large LCD display.

Feb 13, 2017

Operated with DC current, DC voltage, process signals thermocouples and RTD inputs, PAX®2C PID Controllers are enabled with Ramp Soak functionality and FlexCard™ plug-in options such as heater current monitor and second process input card. Enabling 20 step changes for adjusting temperature, controllers come with 16 alarms and built-in USB programming port. PAX2Cs are suitable for automation... Read More

Controls & Controllers

Watlow Receives UL® Certifications for Hazardous and Non-Hazardous Locations on Select WATCONNECT® Control Panels

Feb 10, 2017

St. Louis, MO – Watlow®, an industry leader in the design and manufacture of complete thermal systems, recently announced that it received UL® approval on four models from the new WATCONNECT® line of control panels. The C2, C3, C4 and C5 panels are now certified for hazardous and non-hazardous locations, and they are available for immediate order and shipment. The C2 is the small... Read More

Controls & Controllers

HEC-P6000 Controllers feature user configurable analog inputs.

Feb 09, 2017

Programmed using Ladder Diagram, Function Block, and Structured Text, HEC-P6000 Controllers come with high I/O count with 14 digital inputs, 3 high speed counter inputs, quadrature encoder interface and 14 digital outputs rated for 2A each. Supporting MODBUS RTU/ASCII protocols, controllers are operated with 8-32 VDC supply voltage in -40°C to +80°C temperature range. HEC-P6000s are designed... Read More

Controls & Controllers

828D CNC Controllers are equipped with software version 4.7.

Feb 04, 2017

Capable of controlling milling machines with up to eight interpolating axes or spindles, 828D CNC Controllers support machine tool builders in designing compact grinding machines with up to ten axes and two machining channels. Used for milling, turning and grinding machine applications, controller can transfer contour elements directly from DXF file via contour detection into programming of... Read More

Controls & Controllers

VeriFast™ MicroView Controller comes with IP67 rated enclosure.

Feb 02, 2017

VeriFast MicroView Controller comes with intuitive user interface. Controller provides integration of analog linear position sensing devices integrated into resistance welding systems which need digital I/O. Product features solid state design, standardized connectors and IP67 rated enclosure.

Read More

Controls & Controllers

Electronic Temperature Controllers Provide User-Friendly Technology

Feb 02, 2017

Reno, NV – January 26, 2017 – In response to the demand for more feature filled, low-cost electronic temperature control solutions, Selco is re-introducing the standard and custom series of electronic temperature controllers. For applications where high precision temperature control is required and where time and/or temperature reading must be displayed, these electronic controls offer an... Read More

Controls & Controllers

eZNTW Programmable Thermostat features onboard Wi-Fi.

Feb 01, 2017

Available in variety of housing color options and customizable layout, eZNTW Programmable Thermostat features intuitive and customizable touch-interface. Combined with Wi-Fi and enOcean connectivity, product can be configured using NFC-enabled mobile devices or webpage through WiFi. Used in high occupancy locations like higher education dormitories and healthcare facilities, thermostat is... Read More

Controls & Controllers

Hydra Transducer Pump Control Panel comes in stainless steel NEMA 4X enclosure.

Jan 30, 2017

Suitable in sewage, wastewater and dewatering applications, Hydra Transducer Pump Control Panel is designed for controlling single and three phase pumps. Used for simplex, duplex and triplex operations, product comes with alarm visual indicators, motor protective switch and remote monitoring contacts. Featuring HMI touchscreen display, product helps in monitoring of tank level, pump status and... Read More

Controls & Controllers

Unidrive M700 Variable Speed Drives for cooling in power station.

Jan 28, 2017

Controlling 22 cooling tower fans in two towers of power station, Unidrive M700 VSD minimizes power usage at low unit loads. VSDs have soft start, prestart braking and real-time Ethernet capability. M700 VSDs enable for flexible controlling of induction and permanent magnet motors. 

Read More

Controls & Controllers, HVAC, Material Handling & Storage

Carrier to Highlight Investment and Innovation with Newest Climate Control Products at AHR Expo

Jan 28, 2017

CHARLOTTE, N.C., Jan. 27, 2017 - From new, advanced products and services to enhancements of proven legacy solutions, Carrier will preview its "Next Big Things" Jan. 30-Feb. 1 at the world's largest convention dedicated to the climate control industry. Carrier's slate of new offerings underscores the business' unwavering commitment to innovation through research and development... Read More

Controls & Controllers

Type JSD Slot-Head Speed Controllers are operated with air as medium.

Jan 27, 2017

Available in Elbow type with 360° rotatable x-axis resin body and Free type with 360° rotatable x- and y-axis resin body, Type JSD Slot-Head Speed Controllers are operated in 14.5 – 130 psi pressure range. Having 2/3 the height of its conventional counterpart, units work in 32-140ºF with 7.25 psi check valve pressure. Product is used in packaging and factory automation applications.

Read More

Controls & Controllers

Brother Gearmotors Expands Portfolio with Optimized VFDs from American Control Electronics

Jan 21, 2017

SOUTH BELOIT, IL – American Control Electronics (ACE) announces that they have partnered with Brother Gearmotors, a division of Brother International Corporation. Brother Gearmotors will now offer ACE’s premium selection of variable frequency drives (VFDs) as a product add-on to its portfolio of ultra-reliable, sub-fractional AC gearmotors and reducers. OEM customers benefit by having easy... Read More