Redundant Control System suits press manufacturers.

CM-1805-AS control module and 9020C console clutch/brake controls meet/exceed OSHA and ANSI standards for control reliability. Control module is comprised of 2 embedded PLCs with 48 DC and 4 AC inputs, 8 AC solid state and 5 relay outputs, 1 Redundant Captive Contact Safety Relay, one RS232 serial port, and 6 LED inputs, each. All control relays and safety relays are socketed for field...

Read More »
Multi-Input Controller replaces several controllers.

Multi-Input Controller replaces several controllers.

Available in 1/4 DIN, 1/16 DIN, 1/8 DIN, and 72 mm package sizes, SR90 Series multi-range, auto-tune controller may be programmed to replace several different controllers. It incorporates dust- and splash-proof front cover and 20 mm display. With 14 user-programmable, thermocouple-input ranges and 8 RTD ranges, unit also offers 14 mV, V, and mA ranges. User can select appropriate Control Mode...

Read More »

Servo Motion Controller offers stand-alone control.

MotionBlox(TM) Multi-Axis Servo Controller integrates high-level machine control, servo control, servo drives, digital I/O, safety and E-stop circuitry into one package designed to be embedded into OEM's mechanism. Scalable unit offers 4 axes of coordinated motion, with expansion capability to 8 axes, including absolute encoder support. MotionBlox is compatible with SmartController(TM) and...

Read More »
Electronic Padlocks provide key control and audit trail.

Electronic Padlocks provide key control and audit trail.

CyberLock Electronic Padlocks consist of pickproof electronic cylinder in padlock, CyberKeyÂ-® that cannot be duplicated, and CyberAuditÂ-® access control software. Access privileges and battery power are located in key, which can be programmed to restrict each authorized user's access to specific padlocks on pre-selected days and times. Each time CyberKey opens padlock, record of user...

Read More »
Digital Protocol transfers data at rates to 90 Mbaud.

Digital Protocol transfers data at rates to 90 Mbaud.

Using FastWire digital protocol, 10/Series Numerical Controls connect and control remote modules. Synchronization between master (CNC) and FastWire devices is hardware-generated and utilizes a single high speed cable. With up to 64 FastWire devices being treated as memory locations, reading and writing of specific variables of any device does not influence data transfer speed. CNC also auto tunes...

Read More »
Hot Swap Controller features I_C interface.

Hot Swap Controller features I_C interface.

Model LTC4240 allows board to be safely inserted and removed from live CompactPCIÂ-® bus slot. It controls all 4 CompactPCI supplies by employing 2 external N-channel transistors for 3.3 and 5 V supplies, while 2 on-chip switches regulate Â-

Read More »
Treatment System removes odors and VOCs from air.

Treatment System removes odors and VOCs from air.

Based on Non Thermal Plasma technology, IonOÂ-²x treats air and gas emissions by converting odor, VOCs, and complex organic compounds to CO2 and H2O. Using electricity, unit treats air volumes from 500-350,000 cfm. Product treats vent and process air from general process activities where odor and fumes are entrained in emitted air. It is also suited for process factories for food, pet, fish,...

Read More »
ISA Card controls DC brushed and step motors.

ISA Card controls DC brushed and step motors.

NavigatorÂ-®-ISA 1-4 axis ISA card provides dedicated motion control features such as trajectory generation, motor output generation, and on-the-fly changes. It offers servo loop rate of 100 Â-µsec/axis, with 5.0 Mcount/sec quadrature encoder input rate. On-board trace capability of 256 KB provides ability to analyze system performance and tune servo filters. Total of 16 general-purpose...

Read More »
Miniature PLCs support all major communications platforms.

Miniature PLCs support all major communications platforms.

Available with Modbus, ABB-CS31, RTU, Profibus DP, Devicenet, CANopen, RCOM, ARCNET, and Ethernet, the 40, 50, and 90 Series Programmable Logic Controllers have 32-bit processors and offer double word memory, PID control, and 32-bit arithmetic. Onboard memory ranges from 34-480 K and is expandable to 2 M with optional flash rom. Devices offer digital I/O to over 1,000 points and analog I/O to...

Read More »

Packaged Control Systems integrate software and hardware.

Combining flexibility of proprietary, open-architecture software with packaged control solution, products include industrial PC, touchscreen monitor, machine interface components, and cabling, plus preloaded OpenCNCÂ-® or WinMotionÂ-® software. Software includes soft CNC or software motion, PLC, HMI, API, and real-time data collection. Packages allow users to upgrade/interchange hardware,...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics