Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface
Electrical Connectors

Amphenol Offers HD-BNC Jacks with IP-67 Sealed Interface

The HD-BNC Jacks consist of PCB and cable mount products that are offered in connector housing made from machined brass with beryllium copper outer contacts. The units are designed to interact with Belden 4855R and 1855A. The jack bodies come with gold plated center contacts for increased electrical performance. The products are suitable for use in applications such as remote viewing, digital...

Read More »
Wago Offers MCS MAXI 832 Series PCB Connectors for High Power Applications
Electrical Connectors

Wago Offers MCS MAXI 832 Series PCB Connectors for High Power Applications

The MCS MAXI 832 Series PCB Connectors are offered in wire-to-board and wire-to-wire configurations in 2 to 6 pole variants. The units are designed for wire sizes 18 to 4 AWG and feature low mating forces with high contact forces between mating components. They are offered with flexible coding that enables quick coding changes. The connectors are used in applications up to 66 A/600 V, and up to 4...

Read More »
New 314-Pin Board Edge Connector from Yamaichi Comes with Gold Plated Contact Area
Electrical Connectors

New 314-Pin Board Edge Connector from Yamaichi Comes with Gold Plated Contact Area

The MXM3.0 314-Pin Board Edge Connector ensures a stable contact force when subjected to vibrations and shock. The spring characteristic of the contacts allows tolerance compensation and reliable data transmission. It features foldable tabs that are located on the screw fitting that facilitate insertion of the PCB. The unit’s enlarged SMT tabs are used for ground and SMT connection. The...

Read More »
New Solderless Vertical Launch Connectors Deliver a VSWR as Low as 1.3:1
Electrical Connectors

New Solderless Vertical Launch Connectors Deliver a VSWR as Low as 1.3:1

Pasternack offers Solderless Vertical Launch Connectors in 12 models in male and female versions that cover 2.4 mm, 2.92 mm and SMA interfaces. The units feature stainless steel outer conductor, gold-plated beryllium copper center contact and Polyetherimide (PEI) insulators. They offer a maximum operating frequency of up to 50 GHz. The connectors are suitable for high-speed backplanes, signal...

Read More »
Platinum Tools Features New ezEX-RJ45® Shielded Connectors at 2018 CEDIA Expo
Electrical Connectors

Platinum Tools Features New ezEX-RJ45® Shielded Connectors at 2018 CEDIA Expo

Now Shipping, the New Connectors Feature a Unique Integrated Hi-Lo Stagger Load Bar and Allow “Big” Conductors to Pass Through the Front End of the Connector, Making it Easy to Verify the Wiring Sequence Before Terminating NEWBURY PARK, Calif., Aug. 22, 2018 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of...

Read More »
New 380-10-1XX-10-003000 Right Angle Solder Cup Headers Reduce Wire Handling
Electrical Connectors

New 380-10-1XX-10-003000 Right Angle Solder Cup Headers Reduce Wire Handling

The new 380-10-1XX-10-003000 right angle headers eliminate the need to bend wires or cables for in-line connections, making them  ideal for applications where space is limited. The solder cups are uniformly aligned by their insulator’s rotation limiting features and kept in place with corrosion- and wear-resistant pins and right-angle tails. The single row connectors include .100 in. pin...

Read More »
New Right-Angle Ethernet Patch Cords Feature a Braided Shield Cable Construction
Electrical Connectors

New Right-Angle Ethernet Patch Cords Feature a Braided Shield Cable Construction

The Cat5e from L-com Global Connectivity is a right-angle ethernet cable. It contains a braided high-flex assembly that rates at 10 million flex cycles at 8x the cable diameter, making it ideal for use in continuous motion applications typically needed with automation and robotics.  The cables feature a specialized channel separator and load bar in which helps its performance while maintaining a...

Read More »
New Pre-Insulated POD-LOK Receptacles Carry a Maximum Continuous Current of up to 20 A
Electrical Connectors

New Pre-Insulated POD-LOK Receptacles Carry a Maximum Continuous Current of up to 20 A

The Pre-Insulated POD-LOK Receptacles are designed for applications such as home appliances, HVAC systems and industrial machinery. The units are offered in straight and flat types in 187 and 250 series that accommodate wire sizes ranging from 24-16 AWG and 22-12 AWG respectively. These receptacles can be operated in -40° to 105°C temperature range and meet UL 94 V-0 flammability standards. The...

Read More »
New HD Card Edge Power Connectors Offer Reliable Performance in Harsh Environments
Electrical Connectors

New HD Card Edge Power Connectors Offer Reliable Performance in Harsh Environments

The High Density (HD) Card Edge Power Connectors are designed for high power supply applications such as servers, switches and storage devices. The units offer high current at 25 A/contact and support 1500-2000 W power supply. The connectors can be operated in temperatures up to 130°C and feature a signal pitch of 1.27 mm. The units are compatible with standard PCB footprint design.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers