New IO-Link Converter from Balluff Comes with IP67 Stainless Steel Housing
The IO-Link Converter for RS232 Devices is used for connecting barcode scanners, printers or RS232 controllers. The converter is offered in 118 x 18 mm dimensions with 100 g weight. The unit comes with 2 x PNP, type 3 digital inputs and highly visible LEDs. The IO-Link is made via a 4-pin M12 plug and 8-pin M12 female (RS232 side).
Read More »
Leviton First to Announce UL Listing for 250-Volt Tamper-Resistant Receptacles
The new UL listed 250-volt tamper-resistant single receptacle will meet the 2017 National Electric Code ® Article 406.12. MELVILLE, N.Y., Oct. 30, 2018 /PRNewswire/ -- Leviton recently announced their UL listing of heavy-duty industrial specification grade 15-amp and 20-amp 250-volt tamper-resistant single receptacles. They provide a solution that meets the requirements of Article 406.12 of...
Read More »
Latest CombiTac 2.5 kV High-Voltage Module Uses MULTILAM Contact Technology
The CombiTac 2.5 kV High-Voltage Module is suitable for testing equipment and high-voltage transfer applications in A&D, railway and general industry. The product offers mating cycles of up to 100,000 and are resistant to vibrations and shock. The module comes with 4-pole carrier with Ø1.5 mm contacts and a width of 8 mm. The product allows users to insert four high-voltage contacts in a...
Read More »
Helind Now Offers CX Series USB Type-C Connectors with 10 Gbps High-Speed Transmission
The new CX Series USB Type-C Connectors are offered in hybrid (mid-mount) and double-row SMT (top-mount) varieties and provide a new protocol for data connectivity in consumer, industrial machinery and automobile markets. The units are complaint to RoHS standards and are halogen-free. The connector’s alternate modes allow accommodation of MHL and DisplayPort video standards.
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »
Harwin Presents New M225 Connector Series That Can Withstand 10G Vibrational Force
New M225 Cable-to-Board Connector Series are offered with glass-reinforced poly-phenylene sulphide enclosures that feature a minimum insulation resistance of 100 MΩ. The connector’s tin-plated copper alloy male contact features a current rating of 3.3 A and maximum contact resistance of 25 mΩ. The units come with rapid mate-before-lock retention system, which increases holding force and...
Read More »Dynamic Series connectors from TE Featured in THE EDGE by Future Electronics Dynamic Series connectors from TE Featured in THE EDGE by Future Electronics
Montreal, Canada – October 15, 2018 – Future Electronics, a global leading distributor of electronic components, is featuring TE’s Dynamic Series connectors in the latest edition of THE EDGE. TE’s Dynamic Series connector solutions range from signal-level circuitry to power circuit connectivity – all in a ruggedized, industrialized package. The Dynamic Series is designed for use in...
Read More »
New Emerson Explosive-Proof Plug for Safe, Reliable Temporary Power
Emerson introduces its new Appleton U-Line Interchanger 15 and 20 amp plugs. The products are designed for use in hazardous, wet and corrosive places and meet the NEMA Type 4 watertight rating. The plugs are suitable for Class I, Division 1 and 2 Groups B, C, D ratings and/or Class I, Zone 1, Group IIB + H2 ratings; Class II, Division 1 and 2 Group F, G ratings; and Class III rating requirements...
Read More »
Dinkle Offers Push-in Design Plug with Pitch of 3.5 mm
The Push-in Design Plug is offered with screw lock flanges with ultra flat design of 13.25 mm. The unit offers 4 to 40 positions and is suitable for applications in which accidental plug is not permitted. It come in cross section up to 1.5 mm².
Read More »
Bridgeport's MC-FLEXFIT™ Adjustable MC Connectors Win ShowStopper Award at NECA 2018 Philadelphia
Bridgeport’s new 680-UI series can handle large range of feeder MC cable STRATFORD, Conn. (October 5, 2018) – Bridgeport Fittings’ new 680-UI series of MC-FLEXFIT adjustable, end-stop connectors was named a ‘ShowStopper’ award winner at the NECA 2018 Philadelphia trade show, held Sept. 29th-Oct. 2nd at the Pennsylvania Convention Center. ‘ShowStopper’ winners were selected from more...
Read More »
Latest Spring-Loaded Wire Termination Connectors from Mill-Max Come with Solder-Cup Terminations
The Mill-Max’s 868 Series Connectors are available in 2-6 positions with high temperature molded Nylon 46 insulators. The units are suitable for mounting into product housings for docking stations, cable terminations and panel mount equipment. The connectors are offered with gold-plated stainless-steel spring that provides reliable operation to 1 million cycles. The 868 interconnects are...
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
