New Computer Hardware & Peripherals Products

I/O Module allows 4-wire RTD measurements.

FP-RTD-124 FieldPoint(TM) module offers 8 input channels for direct connectivity to 4-wire 100 platinum resistance temperature detectors (RTDs). It has 16-bit resolution and 50/60 Hz filtering. Module works with FieldPoint Explorer software as well as FieldPoint 2000 family. Suitable applications include those that require temperature sensing throughout process, such as controlling multi-stage...

Digital I/O Board plugs into PC/104 slot or stack.

Model 104-IIRO-16 32-channel board provides change-of-state detection, 60 V optical isolation on input lines, and standard Form C SPDT relay outputs. Isolated, non-polarized inputs may be driven by dc sources of 3-30 V or ac sources at frequencies of 45 Hz to 10 kHz. The 16 input channels are available via 34-pin header, while relay outputs are available via 50-pin IDC type header. Board is...

Touchscreen Interfaces offer 133 MHz processing.

HMI500 Series features standard recipe and real-time clock, 5 MB standard Flash and Operating RAM, 256 colors, lifelike animations, and ability to place unlimited number of touch objects on each screen. Units support 20 brands of controllers and variety of protocols, including Modbus multi-drop network protocol.

CPU Board provides number crunching.

VMP2 VME 3U processor board is based on Motorola's MPC8245 Kahlua II microprocessor with PowerPC MPC603e core, operating at 330 MHz. Board delivers 450 Mips of performance while drawing only 5.8 W of power. It incorporates direct soldered 64-bit, 133 MHz SDRAM (up to 256 MB) featuring selectable in-line ECC controller. Dual channel programmable DMA controller provides range of mass data...

Key Considerations for Basic Die Cutting: Tooling, Costs, Material Behaviors, and Tolerances

Key considerations to keep in mind when evaluating die cutting as your process of choice for part production.

Industrial PCs suit various HMI applications.

TELEMECANIQUE MAGELISÃ-® iPCs offer LCD screens, power supplies, floppy disk/CD-ROM drives, and up to 6 expansion slots. Impact- and vibration-resistant displays are available in 12 or 15 in. touch screens. PCX PLC coprocessor cards enable distributed I/O management on fieldbus and integrates control system functions in PC. Choice of CPUs varies from Celeron 566 Mhz to Pentium III 850 Mhz....

LCD Monitors can be mounted from front or rear.

1747L and 1767L 17 in. Entuitive touchmonitors for kiosk, industrial, POS, or gaming applications have removable anodized bezel that converts monitor from front mount to rear mount. Both have 250 NIT panel; DVI-D interface; VESA mounting; wiper blade touch screen to bezel seal; and UL, cUL, FCC, CE, and TUV-GS approvals. Serial and USB touch interfaces are available for AccuTouch resistive, and...

Routers have interchangeable motors and bases.

Model DW616K, 1-¾ hp, 11 A fixed-base router, and Model DW618K 2-¼ hp, 12 A electronic variable-speed, fixed-base router, with soft start and spindle lock, are offered with fixed, plunge, and D-handle modular bases. Adjustable motor cam lock eliminates need for tools to change bases or set cut depth. Micro-Fine Depth Adjustment Ring with 1/64 in. increments allows for minute depth adjustments...

Web Server connects PLCs to Ethernet network.

FP Web Server supports 10Base-T, stores HTML web pages, sends text emails, and supports transparent/PPP mode. All features except for web page development are programmable with FP Web Tool Configurator software. Unit can be used as gateway to existing LAN network or set up for modem dial-up.

Industrial Computer can be configured for HMI applications.

TELEMECANIQUE MAGELISÃ-® IPC industrial PC has modular LCD screen, power supply, floppy disk/CD-ROM drive, expansion slots, and choice of CPU, from Celeron 566 MHz to Pentium III 850 MHz. Display is available in 12 or 15 in. touch screen, with or without keyboard. PCX PLC coprocessor card enables distributed I/O management on fieldbus. PC has Fast Ethernet port, 2 serial ports, and 2 USB...

Terminal Servers offer hotkey access.

Instant Failover with Hotkey Access allows users to toggle between 2 different Windows Terminal Server sessions from single ACP Enabled Thin Client. Applications can be identical or completely different, allowing simultaneous access of, for instance, HMI application on one machine and CAD package on other machine. Hotkey Access can be added to any Thin Client installation with 2 or more Terminal...

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.