New Coatings Products

Potable Water Polyurea is ANSI and NSF approved.

Part of ControlTech(TM) coatings line, EnviroLasticÃ-® AR 520 PW is USDA-acceptable and NSF-approved to ANSI-NSF 61 Standard for potable water storage. Available in brush and caulk grades, impact-resistant, VOC-free, odorless coating dries tack-free in as little as 45 sec. It may be applied at temperatures down to -20Ã-

NSF-Approved Coatings suit potable water applications.

Macropoxy® 646 NSF Fast Cure Epoxy is a fast-drying polyamide epoxy for steel and concrete structures. At 77°F and 50% relative humidity, it dries to touch in 2 hrs. Macropoxy® 846 NSF Winter Grade Epoxy is a fast-drying polyamide epoxy for industrial application maintenance and can be applied at temperatures as low as 35°F. It cures to touch in 4-5 hrs at 40°F, 50% relative humidity. Both...

Coating Material provides abrasion resistance.

WEAResist(TM) polymer/ceramic coating can be applied to virtually any surface requiring protection from harsh operating environments. It remains pliable when cured, absorbing impact and improving abrasion resistant properties. One-part formulation requires no mixing. WEAResist(TM) will fully cure in 8 hours at temperatures from 0-210Ã-

Acrylic Conformal Coating now available in aerosol can.

Suited for printed circuit and printed wire assemblies, moisture-resistant 1B31 clear conformal coating allows users to make quick repairs, cost-efficient prototypes, low cost retrofits and small production runs. Product contains UV safety tracer for inspection under black light and is MIL-I-46058C and IPC-CC-830 qualified. It is available in liquid bulk packaging in quarts, gallons, 5-gallon...

The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors

This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.

Water-Based Epoxy suits industrial/marine applications.

Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77Ã-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water,...

Pure Diamond Grade provides wear resistance.

Type KD1405 pure diamond cutting tool material can increase tool life 100-200% relative to conventional PCD tooling on continuous to lightly interrupted turning, finishing, and semi-finishing milling applications. Material is produced using chemical vapor deposition applied by plasma torch method, providing pure diamond microstructure that is tough enough to withstand milling operations. KD1405...

Biocompatible Dielectric Material suits medical devices.

High strength toughened fluoropolymer (HSTF), produced through manipulation of PTFE microstructure, offers scrape abrasion resistance, cut-through resistance, and dielectric strength of 1.4 kV/mil in pinhole free profiles as thin as 0.0005 in. Material can be applied over conductors as small as 50 AWG wire. Applications include electrophysiology products and other catheter-based products where...

Corrosion Inhibitor suits off-shore applications.

VpCIÃ-®-609 provides environmentally acceptable and biodegradable corrosion protection for interiors of HRSG and HVAC equipment, piping, and tanks. With zero bioaccumulation potential, product provides up to 24 months of continuous corrosion protection including liquid, vapor-phase, and interface protection above liquid level. It has neutral pH and does not contain nitrites, phosphates, heavy...

Waterproof Coating simplifies concrete applications.

Barricoat(TM) water-based asphalt emulsion, modified with synthetic rubber and additives, forms monolithic, flexible membrane without use of primers. Waterproofing and vapor-retardant membrane can be applied to concrete, CMU, wood, and metal. Non-flammable, solvent-free system is offered in 2 types: Barricoat-S single-coat spray application, and Barricoat-R double-reinforced roller applied system.

Glass Coatings reduce home energy consumption.

CertincoatÃ-® Low E flat glass coatings, for window manufacterers, are pyrolytic hard coatings for cold climates. They carry high solar heat gain coefficient to utilize sun's energy. Solar Selective SunE(TM) glass coatings, developed for hot climates, are hard ceramic coatings that cut energy costs by combining solar selectivity with low emissivity. Specialty glass coatings provide...

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.