Sleeves

Luminite Products Corp Acquires European Patent for Load-N-Lok Technology

Bradford, Pennsylvania Luminite Products Corporation, a digital direct, laser engraved, sleeve and covered cylinder supplier to the flexographic printing industry, announces the acquisition of the European patent for their air sleeve" system that does not require an air mandrel. (European patent #2398646 and US patent #8,307,764) The Load-N-Lok system allows the press operator to introduce air...

Read More »
Cleaning Equipment

Automated Floor Cleaner cleans quickly and thoroughly.

OmniFlex™ AutoVac can be switched within seconds between corded and battery operation, which offer respective cleaning rates of up to 16,000 and 20,000 ftÂ-²/hr. Powered by Lithium-Ion smart battery technology, unit removes 99% of targeted soil and removing contaminants from floors to leave surfaces hygienically clean. Minimal moving parts reduce associated downtime and repairs, and dust...

Read More »
Cleaning Equipment

Nordson MARCH Wins 2015 NPI Award for Its FlexVIA-Plus Plasma Treatment System

System provides desmear and etchback plasma treatment of flexible electronic substrates with capacity of up to 30 panels per cycle Jonathan Doan, Nordson MARCH, accepts award from Mike Buetow, editor Circuits Assembly Concord, California, USA - Nordson MARCH, a Nordson company (NASDAQ: NDSN), a global leader in plasma processing technology, has won the 2015 New Product Introduction (NPI) Award in...

Read More »
Washing Equipment

Parts Washers include basket-style and in-line models.

Offering semi or fully automated parts handling, Rosink Parts Washers are used for degreasing, cleaning, phosphating, apply corrosion control coatings, and paint stripping. RFL Front Loader is suited for cleaning very large parts with complex geometries. Basket-style ModelÂ- RC consists of mobile water-based cleaning system, while energy efficient Model RCE features stainless steel...

Read More »
Sponsored

MICRO 90® Cleaning Validation Method Using Swab Technique and HPLC/MS

Highlighting surface rinsing and swabbing as the two techniques used in cleaning validation, this paper explains how swab recovery technique and quantification with HPLC using charged aerosol detection (CAD) and mass spectrometry (MS), helped in developing a cleaning validation method for MICRO 90. It states that combined HPLC and MS detection methods could evaluate limit of detection and limit of quantification, along with sample recovery data, and suggests that this experimental report could help the customers while developing their cleaning validation method for MICRO 90. The paper overviews the sample preparation method and conditions for data collection, and also includes the procedure for determining recovery of the sample along with the equations for calculating LOD and LOQ. Figures illustrating swabbing procedure and chromatogram of a MICRO 90® sample with a CAD detector, along with the table of sample recovery data are added.

Read More »
Laboratory Glassware Washers fit lower countertops.
Washing Equipment

Laboratory Glassware Washers fit lower countertops.

Promoting loading/unloading accessibility for all lab associates, FlaskScrubber® 33 and SteamScrubber® 33 are available with overall height of 33 in. SteamScrubbers have top and bottom racks that accommodate accessory inserts for range of glassware shapes and sizes, and FlaskScrubbers come with all components needed and have tower spindle racks that hold up to 36 pieces of primarily...

Read More »
Industrial Pass Through Washer serves manufacturing applications.
Washing Equipment

Industrial Pass Through Washer serves manufacturing applications.

Along with 24 in. wide x 12 in. tall wash zone on chain mesh belt conveyor, CBW 2412H offers belt flow speeds adjustable from 2–20 fpm on continuous pass through basis. Number and location of spray bars — 8 overhead and 8 under top plane of belt — maximize coverage, and side spray capabilities allow 360° coverage. Along with 12-gauge, powder-coated steel cabinet, features include two...

Read More »
Exair Product Update: Heavy Duty Dry Vacs Are Now CE Compliant
Cleaning Equipment

Exair Product Update: Heavy Duty Dry Vacs Are Now CE Compliant

Independent laboratory tests now certify that EXAIR's Heavy Duty Dry Vac™ meets the rigorous safety, health and environmental standards of the European Union that are required to attain the CE mark. The Heavy Duty Dry Vac is a rugged, industrial duty vacuum cleaner that has been engineered to vacuum high volumes of dry materials in less time than ordinary vacs. The wear resistant design is...

Read More »
Cleaning Equipment

Wet/Dry Vacuum Cleaner operates in rugged environments.

Designed to collect dust, debris, and liquid in rugged environments such as building and construction sites, Eliminator Pro II delivers 130 cfm airflow while using 8.5 A of energy. Unit features 26 x 17 x 36 in. footprint and 12 gallon collection tank that is equipped with 32 mm drain hose. Multi-stage filtration system includes disposable bag (optional), cloth main filter, and HEPA filter...

Read More »
Cleaning Equipment

Dry Steam Vapor Cleaners serve commercial applications.

Used for degreasing, machine maintenance, and deep cleaning, 220 V Blitzer Combi heats up in 7 min and achieves pressures up to 120 psiÂ- as well as tip temperatures of 212°F. Compact and maneuverable Envirosteam UVC uses dry steam vapor enhanced with uvc light to sanitize captured soils for critical cleaning procedures. Internal boiler produces dry steam up to 145 psi...

Read More »
Waterjet Intensifier Pump suits shops with limited power.
Abrasive Blast Equipment

Waterjet Intensifier Pump suits shops with limited power.

Drawing 37 full load amps at 460 Vac or 74 full load amps at 230 Vac, 30 hp Model iP60-30 produces 0.6 gpm of ultra-high pressure water at continuous operating pressure of 55,000 psi. Tie-rod design eliminates threads on high pressure cylinders, end caps, and hydraulic cylinders, while matched metal components prevent galling of hydraulic components. Pump includes hydraulic accumulator which...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics