Chucks and Collets

Vulcanized Collet Heads can be interchanged in seconds.
Chucks and Collets

Vulcanized Collet Heads can be interchanged in seconds.

Quick-change FlexC(TM) Vulcanized Collet Systems, models A and D, are accurate to .0004 in. TIR, while DL models are accurate to .0008 in. TIR. Gripping range of .020 in. above/below nominal size allows for variations in bar stock without need for collet change. Hardened chrome-nickel steel collet heads feature concentricity of .0002 in. and pull-back thru-hole, pull-back stationary stop, and...

Read More »
WENmagnetics Offers BIG Kaiser Unilock Clamping Interface
Workholding Systems

WENmagnetics Offers BIG Kaiser Unilock Clamping Interface

Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. joins forces with WEN Technology, Inc. of Raleigh, NC, to introduce Zero-Point clamping for magnetic workholding applications. BIG Kaiser Unilock and WENmagnetics are a natural fit since both systems are designed to grip from one face only, leaving all remaining faces available for manufacturing. WEN Electro-permanent magnetic systems only...

Read More »
Hardinge® Manufactures TF25-OG Overgrip Pickoff Collets for Cincom M20 and L20 Swiss Turning Centers
Tool Holders

Hardinge® Manufactures TF25-OG Overgrip Pickoff Collets for Cincom M20 and L20 Swiss Turning Centers

Overgrip collets, also referred to as over-the-shoulder collets, are used on a pick-off spindle when it is required to clear a shoulder and grip on a smaller diameter beyond. A good example of this type of part would be a screw. In collaboration with Citizen Machinery Tech Center, managed by Bob Meunier, Hardinge has developed and now manufactures standard TF-25 OG overgrip collets for Cincom M20...

Read More »
T De G Large Manual, Power, and Air Chucks from LMC Workholding
Chucks and Collets

T De G Large Manual, Power, and Air Chucks from LMC Workholding

Logansport, IN - LMC Workholding now offers TALLERES DE GUERNICA (T de G) large manual chucks and power chucks for various workholding applications. T de G manual chucks include self centering, 4 jaw independent, 3 and 4 jaw oil country and large diameter combination chucks with diameters from 6 to 72". Several T de G power chuck models are available from 24" to 78" diameters and include solid...

Read More »
Collet Chucks accept ER collets from any manufacturer.
Chucks and Collets

Collet Chucks accept ER collets from any manufacturer.

Available with BIG-PLUS interface, ER16 and ER32 Collet Chucks are capable of supplying coolant through spindle or through spindle flange. Model ER16 is available in 2.5, 4, and 6 in. gauge lengths for 40 taper, and 3.5, 5, and 6 in. gauge lengths for 50 tapers, while ER32 chuck is available in 3, 4, and 6 in. gauge lengths for 40 taper and 3.5, 5, and 6 in. gauge lengths for 50 tapers. They are...

Read More »
Special Safety Chuck Features Accommodate All Applications
Chucks and Collets

Special Safety Chuck Features Accommodate All Applications

Double E sliding safety chucks are safer, easier to operate, and more rugged than tilting designs. Chucks can be flange-mounted or foot-mounted, fixed or with sidelay adjustment. Sidelay adjustment chucks and rotary tables are available to compensate for misalignment and/or baggy web edges, and a fixed drive shaft option is even available. A fixed drive shaft is often helpful on rewinds using...

Read More »
Clamping Chuck suits low profile applications in water.
Chucks and Collets

Clamping Chuck suits low profile applications in water.

Measuring 40 mm tall, Quick Change Clamping Chuck features standard 40 mm clamping knob that can be attached directly to workpieces or fixtures with up to 12 mm thread. It can accept Unilock clamping knobs from top or bottom side, allowing parts to be flipped upside down. Suited for high-torque applications, stainless steel chuck has profile of 150 x 100 mm, and offers accurate positioning of...

Read More »
Replacing Collet Pads Is Faster Than Replacing The Solid Collet
Machine Pads

Replacing Collet Pads Is Faster Than Replacing The Solid Collet

Master collets and pads can save time and money. Hardinge, the inventor of the S-pad concept, has a dedicated S-pad manufacturing cell enabling them to maintain stock availability on more than 1000 styles and sizes of pads. The style-S master collet, although originally designed for multi-spindle automatic screw machines, has many benefits to the CNC lathe operator. The collet pads can be changed...

Read More »
Custom Lightweight Carbon Fiber Core Shafts
Tubes and Tubing

Custom Lightweight Carbon Fiber Core Shafts

NimCor's composite core shafts are engineered for exact performance. (Nashua, NH) - NimCor's carbon fiber core shafts are custom engineered for optimum performance within each application. Winding configurations, fiber modulus ratings, composite resins and curing cycles for each shaft are all controlled within NimCor's ISO-certified winding operation. Carbon fiber and fiberglass tubes are...

Read More »
Tubes and Tubing

PPCM Introduces New Honeycomb Packaging Machine

Premier Paper Converting Machinery (New Berlin, Wis.) has introduced custom machinery that produces honeycomb panels for protecting large products, such as consumer white goods, when shipped in corrugate boxes. The new PPCM converting machinery is fed by four large 98-inch wide rolls of Kraft paper, each one weighing up to 5,300 lb. To hold these huge rolls during unwinding, custom carbon fiber...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers