Centrifugal Pump suits high-head, low-flow applications.
Sealless, magnetic-coupled Model 335 has maximum flow of 12 gpm and maximum head of 68 ft. TEFC motor is rated 115/230 V. Threaded and smooth inlet and outlet connections are available. Maximum operating temperature is 190Ã-
Read More »Dewatering Pump handles groundwater and wastewater.
Model 3068 cast iron submersible pump delivers up to 260 gpm with max head of 100 ft. It is available with closed, 2 vane solids handling impeller; with vortex impeller; or in chopper version with Ni hard impeller and cutting plate. Pump comes in single-phase and 3-phase versions and is rated 2.3 and 2 hp (single phase) and 2.4 to 3.8 hp (3-phase). It can be mounted on guide rails in deep sumps,...
Read More »Pump suits tough sump applications.
Pitbull Pump is made up of pressure chamber and 2 check valves with remote control panel. It is based on compressed air piston acting directly on surface of liquid being pumped. Liquid is directed into chamber, pressurized, and discharged with air/liquid interface maintained through process to eliminate need for diaphragm or bladder. Pump cycling is automatic so it stops when no liquid is...
Read More »Centrifugal Pumps suit low-flow, low-head applications.
Magnatex-® MMP Series magnetically driven, sealless pumps provide leak-free pumping of flows to 20 gpm, heads to 90 ft, and pressures to 85 psig. Heavy-duty pumps utilize straddle bearing design, and are furnished with shaft, thrust ring sleeves, and bushings made of Beta-sintered Silicon Carbide material. Shaft is stationary and suction/discharge ports are male NPT. Models are offered in 316 SS...
Read More »Electronic Manufacturing Supply Chain Risk: Are You Vulnerable?
This white paper provides an in-depth overview into electronic manufacturing supply chain risks.
Read More »Polymer Baseplate forms foundation for pumps.
Polyshield Baseplate and Foundation is made from polymer mix using epoxy resins. Single unit replaces traditional baseplate and formed concrete foundation for pump-driver sets. It provides flat mounting surfaces, 1-piece motor mounting block, chemical resistance to aggressive liquids, high vibration dampening characteristics, and less maintenance. Baseplate and foundation can be installed in 1-½...
Read More »Recovery Systems offer custom configurations.
Condensate Commander Pumps feature 125, 200, or 250 psig ASME cast steel tanks for operating pressures up to 250 psi at 400Ã-
Read More »Centrifugal Pump handles corrosive and aggressive fluids.
Prime-GardÃ-® nonmetallic, self-priming, horizontal pump offers fluid contact components made of polypropylene or polyvinylidene fluoride. Retractable front-bearing design allows for mechanical seal inspection. Steel shaft is isolated from liquids and gasses by thick-sectioned, chemically inert, thermoplastic sheath. Pump line provides flows from 5 to 175 gpm with heads to 170 ft at...
Read More »Electric Pumps provide heavy-duty liquid movement.
FiR AC electric pumps are designed for commercial dishwashers, laundromats, and waste separation machines. Centrifugal pump housings and impellers are offered in polypropylene, BMC, and IEXF. Seals are available in NBR, TeflonÃ-®, or EPDM. Pump sections are mounted to asynchronous single or 3-phase induction motors designed for 50 or 60 Hz operation. Horsepower ranges from .10 to 3.6, and...
Read More »Non-Metallic Pumps handle corrosive chemical liquids.
G Series magnetically driven pumps are machined from solid block PVDF or polypropylene. Sealless centrifugal and regenerative turbine pumps have wetted parts made of carbon graphite, PVDF, CFR/PTFE, and alumina ceramic. Impeller diameters range from 4 to 7 in. Raised face flanges provide zero leak connections. Pumps handle flows to 650 GPM and heads to 185 ft. They withstand temperatures from 20...
Read More »Condensate Pumps eliminate flaring to atmosphere.
Closed-Drain leak-tight condensate re-injection pumps provide flow rates from 10 to 157 barrels/hr. They have two PTFE diaphragms that are sandwiched and operate in balance, providing double containment with zero-leakage, run-dry tolerance, and overload protection. Unaffected by dirt, moisture, and contaminants, pumps accept high suction pressure up to 5,000 psi and control fluid being drawn off....
Read More »Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »