Rugged COM Express® Module is intended for SFF systems.

Supporting Type-5 pinout, XPedite5550 complies with PICMG COM Express Compact form factor (95 x 95 mm), operates from -40 to +85°C, and is designed for military, aerospace, and industrial environments. Module has soldered down memory up to 8 GB (DDR3-800), supports conduction- and air-cooled applications, and targets Freescale QorIQ(TM) P1011/P1020/P2010/P2020 processors with clock speeds to 1.2...

Read More »

Multifunction Application Board enhances Vinco platform.

Designed to connect directly to the Vinco development/prototyping board, multi-function application board (shield) incorporates VLSI VS1053b codec for decoding of various audio files, Ethernet connectivity, and RTC feature using NXP Semiconductors PCF32123 timing device. Supplied in 55.4 x 68.6 mm format, product requires 3.3 V supply, generated via onboard regulator, to power PCB.

Read More »
Embedded SBC supports graphics-intensive applications.

Embedded SBC supports graphics-intensive applications.

Equipped with AMD FCH A50M chipset, EP100 EPIC Board supports either 1.65 GHz AMD G-Series APU dual core T56N with Radeon(TM) HD 6320 graphics or 1.0 GHz AMD G-Series APU single core T40R with Radeon(TM) HD 6250 graphics. Embedded board includes DDR3 SO-DIMM socket with up to 4 GB system memory, dual gigabit LAN ports, and 2 PCIe Mini card expansion interfaces. Three display outputs offer...

Read More »

GOEPEL Electronic Demonstrates First Evaluation Kit for Embedded System Access

GOEPEL electronic introduces ESA Coach, a special evaluation and training kit supporting Embedded System Access (ESA) technologies. The new demonstration board enables the practical training of all Embedded System Access technologies such as Boundary Scan, Processor Emulation Test and Chip Embedded Instruments by means of respective tutorials, additionally allowing for the development and...

Read More »
JTAG Technologies - Taking Command with an Array of New Products at ESC San Jose, March 27th to 29th, 2012

JTAG Technologies - Taking Command with an Array of New Products at ESC San Jose, March 27th to 29th, 2012

Silicon Valley, Booth 1842 Eindhoven, The Netherlands - JTAG Technologies, market leader in boundary-scan solutions will showcase these latest hard- and software solutions at ESC: Our brand new solution CoreCommander, taking command of MicroCores for PCB Test & Debug, supporting ARM, Cortex, X-Scale, PowerPC, TriCore etc. Those new series of debug tools for DSP and microprocessor systems utilise...

Read More »
GPIB to I²C Interface Board minimizes wiring, expands control.

GPIB to I²C Interface Board minimizes wiring, expands control.

Used for controlling I-²C devices from GPIB Bus, Model 4802 provides I-²C serial bus, 8-bit parallel bus, and asynchronous serial interface. I-²C signals control devices that comply with I-²C Specification v3.0 dated June 2007 and also with SMBus Specification 2.0 when used in Standard Mode with 100 kHz bit rate. This IEEE-488.2 compatible interface board may also be used in Fast Mode with...

Read More »
CompactPCI Board supports multi-display applications.

CompactPCI Board supports multi-display applications.

Equipped with 1 GB graphics RAM and AMD Radeon(TM) E6760 GPU supporting Eyefinity technology, Model G214 controls up to 6 displays independently. GPU offers 480 stream processors with frequency of 600 MHz and power dissipation of 35 W. Four DisplayPort 1.2 interfaces deliver max resolution of 4,096 x 2,560 at 60 Hz and color depth of 24 bpp. Supporting DirectX® 11, OpenGL® 4.1, and OpenCL(TM)...

Read More »
Wi-Fi Modules offer connectivity for Renesas MCU-based systems.

Wi-Fi Modules offer connectivity for Renesas MCU-based systems.

With GS1011M and GS1500M Wi-Fi Modules, users can add Wi-Fi to embedded systems that use Renesas 8/16/32-bit microcontrollers. WAB-GW-1011MIP adapter board, based on GS1011MIP module, offers ultra-low power 802.11b solution, while WAB-GW-1500M, based on GS1500M module, provides low power 802.11b/g/n solution. Pre-loaded with serial to Wi-Fi firmware, Wi-Fi modules include security, WPS, and...

Read More »

National Instruments Introduces NI Single-Board RIO Embedded Devices with Multifunction I/O for Custom Application Development

News Highlights - Multifunction I/O in a board-level reconfigurable I/O (RIO) product with built-in analog I/O - Customization through daughter cards on two models - More built-in peripherals including two RS232 serial ports, an RS485 port, Ethernet and options for a CAN port, USB port and SDHC card slot - Alleviates the effort of designing an entire embedded system from scratch so designers can...

Read More »

Energizing Multicore: TI's KeyStone II Architecture Delivers Breakthrough Performance, Greater Integration and Superior Power Savings for Infrastructure and High Performance Applications

28-nm multicore architecture with integrated ARM® A15 cores offers enhanced capacity and performance at less than half the power of traditional RISC cores BARCELONA, Spain, Feb. 27, 2012 -- MOBILE WORLD CONGRESS -- Texas Instruments Incorporated (TI) (NASDAQ: TXN) today unveiled significant updates to its award-winning KeyStone multicore architecture, paving the way for a new era of high...

Read More »

All Topics