New Blocks Products

Modular Terminal Blocks feature multi-level design.

With up to 4 staggered levels of poles, PSQ Series offers maximum accessibility for all connection points. Units are available with 2-12 poles, in 5 and 10 mm pole pitches and accept wire sizes up to 11 AWG. Wire connections utilize M3 screws made of nickel-plated copper alloy. Rated for 300 V at 32 A, terminal blocks have PA6-6 polyamide housing and are CE, UL, CSA, VDE, and IMQ approved.

Terminal Blocks are used for bridging of circuits.

With ability to accept wires ranging from 6-24 AWG, CBC series terminal blocks are designed to address applications where bridging of circuits is required for consecutive, alternate, and numerous terminal blocks in one assembly. Bridging is accomplished with Easy Bridge System comb-type bridge ranging from 2 to 50 positions. Available in 4 sizes and made of UL94V-0 polyamide insulating body,...

Miniature Terminal Blocks conserve cabinet space.

Miniature Double Level Terminal Blocks, ASIMBKKB series, offer 2 circuits per terminal block and can be mounted on 15 or 35 mm DIN rail. With current rating up to 20 A @ 300 V and wiring capacity of 30-10 AWG, series conserves space in cabinets along DIN rail with its 2 wiring levels that allow block to have double packing density. PV version can function as power distribution block because its...

Cross Blocks solve height and width adjustment problems.

Accommodating Ã-½ in. round or 7/16 in. square tubing, Cross Blocks for Square and Round Tubes feature stainless steel socket cap screws and hex nuts. Used for mounting perpendicular and horizontal rods, blocks are made of black glass filled nylon plastic that is resistant to oil, solvents, and corrosion, and has maximum heat resistance of 110Ã-

How to Properly Implement Welding Automation to Improve Return on Investment (ROI)

Learn more about the value of automated welding systems, how to calculate your automation ROI, and how to get started.

Plug Connectors offer choice of connection technologies.

Available in screw, spring, or IDC (insulation displacement connection) technologies, COMBI plug connectors plug into DIN-mounted pluggable terminal blocks, and use same plug-in zones for all basic blocks. Standard plugs (UP, SP, QP) feature wire exit on top, while plugs with screw and spring-cage technology (UPBV, SPV) have side wire exit. Units are available in pre-assembled position sizes or...

Terminal Blocks accept 4 plug-in connectors.

Included in WeiCoS (Weidmuller Connection System) terminal block series, ZT4/2AN/1 and ZTPE4/2AN/1 are 4 mmÃ-² models that carry 600 V/32 A electrical rating and handle up to 10 AWG conductors. They combine terminal block and plug-in connection technology, resulting in modular, functionally flexible, and manufacturer-independent wiring system. Externally-tensioned contact and locking element...

Terminal Blocks suit standard wire termination applications.

Ring-lug terminal blocks offer hinged shroud for safe wiring, and finger-safe design to eliminate need for standard/customized dust cover. Used together, WTL 6/4 FF (slide link terminal) and WTD 6/4 FF (standard feed-through) terminal can be configured to create multiple phase testing configurations for current transformer applications. Disconnect test terminals feature combi foot design for...

Distribution Blocks are IP 20 UL-® finger safe.

Available with hinged/removable screw-retaining transparent covers that allow visual inspection of wire and confirmation of connection, single-pole ERIFLEXÃ-® distribution blocks have more than 95% fill ratio. Tinned copper blocks clip onto DIN Rail or mount to panels with screws. By keeping only one input, blocks can be supplied in parallel using jumper wire. They can be ganged for unlimited...

Terminal Blocks increase wiring density.

Featuring 4 conductor connection, UTTB 4 and UTTB 2.5 Double-Level Terminal Blocks connect conductor cross-section ranges of 26-10 AWG and 26-12 AWG, respectively. Universal FBS plug-in bridge system allows cross connection of neighboring feed-through terminal blocks. Same shape ground blocks feature snap-on foot, while double bridge shaft allows individual chain bridging by means of plug-in...

High Current Terminal Blocks accept aluminum and copper wire.

ERTB Terminal Blocks offer secure points of connection and transmission for incoming power line service to electrical equipment. Post-to-clamp style unitized blocks mount to any cabinet/housing attachment point. Single row, 3-wire pole design accommodates line voltage on 1 or 2 poles, handling neutral and ground wires on remaining poles. Blocks are made of impact-resistant polycarbonate with...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.